Powered by Google www.ChineseStandard.net Database: 189759 (19 May 2024)

JJF 1030-2023 related PDF English

JJF 1030-2023 (JJF1030-2023) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
JJF 1030-2023English449 Add to Cart 4 days Measurement and Test Norm of Metrological Characteristics of Thermostatic Baths for Temperature Calibration JJF 1030-2023 Valid JJF 1030-2023
JJF 1030-2010English479 Add to Cart 3 days Measurement and Test Norm of Thermostatic Baths Metrological Characteristics JJF 1030-2010 Obsolete JJF 1030-2010
JJF 1030-1998English359 Add to Cart 3 days Measurement and Test Norm of Thermostatic BathTechnological Characteristic JJF 1030-1998 Obsolete JJF 1030-1998
JJF 1030-1991EnglishRFQ ASK 3 days (Chinese Industry Standard) JJF 1030-1991 Obsolete JJF 1030-1991



JJF 1030-2023: PDF in English
JJF 1030-2023: Technical Performance Test Specification for Thermostat Bath for Temperature Calibration
National Metrology Technical Specifications of the People's Republic of China
Thermostatic bath for temperature calibration
Technical Performance Test Specifications
Released on 2023-10-12
Implemented on 2024-04-12
Released by the State Administration for Market Regulation
Thermostatic bath for temperature calibration
Technical Performance Test Specifications
Replace JJF 1030-2010
Responsible unit: National Thermometry Technical Committee
Main drafting unit: Beijing Institute of Metrology and Testing Sciences
Unit participating in the drafting: Dalian Institute of Metrology, Inspection and Testing Co:, Ltd:
China Jiliang University
Jinan Changfeng Zhiyuan Instrument Technology Co:, Ltd:
Dalian Bokong Technology Co:, Ltd:
Huzhou Weili Instrument Factory
The National Thermometry Technical Committee is entrusted with the interpretation of this specification:
The main drafters of this specification:
Zhang Ke (Beijing Institute of Metrology and Testing Sciences)
Participating drafters:
Li Ying (Dalian Institute of Metrology, Inspection and Testing Co:, Ltd:)
Sun Bin(China Jiliang University)
Zhang Jiong (Jinan Changfeng Zhiyuan Instrument Technology Co:, Ltd:)
Yao Min (Beijing Institute of Metrology and Testing Sciences)
Zeng Yongchun (Dalian Bokong Technology Co:, Ltd:)
Chen Jian (Huzhou Weili Instrument Factory)
Table of contents
Introduction(Ⅱ)
1 range(1)
2 Cited documents(1)
3 terms(1)
4 Overview(2)
5 Technical performance(2)
6 Test conditions(3)
6:1 Environmental conditions(3)
6:2 Standard instruments and supporting equipment for measurement (3)
7 Test items and test methods (3)
7:1 Test items (3)
7:2 Test method(3)
8 Expression of test results(8)
9 Retest time(8)
Appendix A Thermostatic bath test certificate inner page format (9)
Appendix B Uncertainty evaluation of horizontal temperature difference measurement of constant temperature bath (10)
Appendix C Uncertainty Evaluation Example of Vertical Temperature Difference Measurement in Constant Temperature Bath 1 (12)
Appendix D Uncertainty Evaluation Example 2 of Vertical Temperature Difference Measurement of Constant Temperature Bath (14)
introduction
JJF 1071-2010 "Rules for Writing National Measurement Calibration Specifications", JJF 1059:1-2012 "Measurement Uncertainty
Assessment and Expression" together constitute the basic series of standards that support the formulation and revision of this standard:
This specification replaces JJF 1030-2010 "Technical Performance Test Specification for Constant Temperature Baths":
Compared with JJF 1030-2010, in addition to editorial modifications, the main technical changes in this specification are as follows:
---According to the current temperature measurement regulations and specification requirements, add -80℃~300℃ to the range;
---According to the current temperature measurement regulations and specification requirements, increase the technical performance indicators of the constant temperature bath;
---Add the term "immersion depth";
---Based on the technical index requirements of the constant temperature bath, it is clear that the minimum immersion depth of the standard platinum resistance thermometer is 100mm;
---Add test items for temperature rise and cooling rate deviation of constant temperature bath:
The previous releases of this specification are as follows:
---JJF 1030-2010;
---JJF 1030-1998:
Thermostatic bath for temperature calibration
Technical Performance Test Specifications
1 Scope
This specification applies to the temperature uniformity,
Test of temperature fluctuation and heating (cooling) rate:
2 cited documents
This specification references the following documents:
JJG130-2011 Working glass liquid thermometer
JJG229-2010 Industrial platinum and copper thermal resistance
JJG310-2002 pressure thermometer
JJF 1379-2012 Calibration specifications for thermistor thermometers
JJF 1632-2017 Temperature switch temperature parameter calibration specifications
For dated references, only the dated version applies to this specification; for undated references, only the dated edition applies:
The latest version (including all modification orders) shall be applicable to this specification:
3 terms
An area that can ensure the temperature uniformity and fluctuation of the thermostatic bath:
The difference between the maximum temperature and the minimum temperature in the working area of the thermostatic bath under stable conditions:
When the constant temperature bath is in a stable state, the maximum temperature change in the working area within a certain time interval:
The horizontal plane at the highest point of the thermostatic bath working area:
The horizontal plane at the lowest point of the thermostatic bath working area:
3:6 fixedthermometer fixedthermometer
A thermometer fixed in the working area of the constant temperature bath and used to measure the temperature of the constant temperature bath:
3:7 movedthermometer
Thermometers placed at multiple predetermined positions within the working area of the constant temperature bath for measuring the temperature of the constant temperature bath:
3:8 immersion depth immersiondepth
The thermometer is inserted vertically into the thermostatic bath, the length of which it is immersed in the liquid:
......

BASIC DATA
Standard ID JJF 1030-2023 (JJF1030-2023)
Description (Translated English) Measurement and Test Norm of Metrological Characteristics of Thermostatic Baths for Temperature Calibration
Sector / Industry Metrology & Measurement Industry Standard
Word Count Estimation 22,271
Date of Issue 2023-10-12
Date of Implementation 2024-04-12
Drafting Organization Beijing Institute of Metrology and Testing Sciences
Administrative Organization National Thermometry Technical Committee
Issuing agency(ies) State Administration for Market Regulation