HJ 573-2010 (HJ573-2010) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| HJ 573-2010 | English | 209 |
Add to Cart
|
3 days
|
Technical requirement for enviromental labeling products. Ink-jet cartridge
|
HJ 573-2010
| Valid |
HJ 573-2010
|
HJ 573-2010: PDF in English
HJ 573-2010
Technical requirement for enviromental labeling products.Ink-jet cartridge
National Environmental Protection Standard of the People's Republic
Environmental Labeling Product Technical Requirements
Technical requirement for environmental labeling products
-Ink-jet cartridge
Published on.2010-05-04
2010-07-01 Implementation
Ministry of Environmental Protection released
Foreword
To implement the "Environmental Protection Law of the People's Republic of China" and the "Circular Economy Promotion Law of the People's Republic of China"
This standard is formulated for the impact on human health and the environment during use and disposal, and the promotion of the use of environmentally friendly products.
This standard sets forth requirements for toxic and hazardous substances in the inkjet cartridge and environmental design, recycling and reuse, and public information.
This standard refers to the standard of the "Environmental Mark Type No. 142" "Ink Cartridge Version 1.0.2008" of the Environmental Labeling Bureau of the Japan Environmental Association.
Order.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. Environmental Protection Center of the Ministry of Environmental Protection, National Office Equipment and Consumables Quality Supervision and Inspection Center, Zhuhaitian
Weifei Ma Printing Supplies Co., Ltd., China Hewlett-Packard Co., Ltd., Canon (China) Co., Ltd., Epson (China) Co., Ltd., Rui
Slim International Technology Co., Ltd., Ricoh Co., Ltd., Brother (China) Commercial Co., Ltd., Zhuhai Nasida Enterprise Management Co., Ltd.
the company.
This standard was approved by the Ministry of Environmental Protection on May 4,.2010.
This standard has been implemented since July 1,.2010.
This standard is explained by the Ministry of Environmental Protection.
Environmental Labeling Product Technical Requirements
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of inkjet cartridge environmental labeling products.
This standard applies to inkjet cartridges using inkjet imaging technology equipment, including new inkjet cartridges and remanufactured inkjet cartridges.
This standard does not apply to inkjet inkjet equipment used for continuous printing speeds greater than 60 pages/min and printing speeds greater than 70 pages/min.
box.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB 18455 packaging recycling mark
GB/T 16288 logo for plastic products
GB/T 20861-2007 Waste product recycling terminology
HJ 567 environmental labeling product technical requirements inkjet ink
HJ/T 424-2008 Environmental Labeling Products Technical Requirements Digital Multifunction Copying Equipment
SJ/T 11363 Limitation requirements for toxic and hazardous substances in electronic information products
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Inkjet cartridge
A component that provides ink for devices that use inkjet printing technology.
3.2
New inkjet cartridge new ink-jet cartridge
Newly manufactured inkjet cartridges from new parts or parts made of new parts and guaranteed to have the same quality as new parts.
3.3
Remanufactured ink-jet cartridge
After use, the inkjet cartridge is cleaned, repaired or replaced, reassembled, filled, etc. to restore the original function of the inkjet cartridge.
3.4
Use reuse again
The waste product or its components, components continue to be used or cleaned, repaired and continue to be used for the original purpose.
(GB/T 20861-2007)
3.5
Recycling recycling
Disposal of waste products to enable them to be reused as raw materials, but does not include the recovery and reuse of energy.
(GB/T 20861-2007)
3.6
Energy recovery
The process of recycling waste products by incineration, pyrolysis, etc. to recover energy. (GB/T 20861-2007)
3.7
Recoverability rate
The sum of the quality of the new product that can be recycled (including the reused portion, the recycled portion, and the energy recovery portion)
The percentage of product quality. (GB/T 20861-2007)
3.8
Polymer polymer
A compound obtained by repeating attachment of one or several single compound monomers via a covalent bond via polymerization.
3.9
Copolymer
A polymer obtained by polymerization of two or more different monomers.
3.10
Polymer blend
A physical mixture of two or more polymers having different molecular structures.
4 basic requirements
4.1 Product quality should meet the requirements of the corresponding product quality standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Product Environmental Design Requirements
5.1.1 The components, structures and functions used in the design of the product shall not impede the reuse of the product.
5.1.2 The recyclability of the new inkjet cartridge should be above 95% (mass fraction and the quality of the ink should be removed).
5.1.3 Polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE) or chlorinated alkanes (specifically referred to as chain carbon) shall not be used in the product.
An alkane compound having a chlorine content of 50% or more).
5.1.4 There are design requirements for the use of reusable components.
5.1.5 For parts that are not easily peeled off, use the same material as the adhesive part or the material that does not affect recycling.
5.2 Plastic parts requirements Note 1
5.2.1 Chlorine-containing plastics shall not be used in the outer casing of the product.
5.2.2 The type of polymer, copolymer or blend polymer used in the outer casing of the product shall not exceed 4 and is easily decomposed.
5.2.3 The content of lead (Pb), cadmium (Cd), mercury (Hg) and hexavalent chromium (Cr6) in plastic parts shall comply with the requirements of SJ/T 11363.
begging.
5.2.4 The marking on plastic parts with a mass exceeding 25 g and a surface area exceeding.200 mm2 shall meet the requirements of GB/T 16288.
Note 1. For remanufactured inkjet cartridges, only for replacement parts.
5.3 Ink requirements
The ink used in the product should meet the HJ 567 ink requirements.
5.4 Requirements for release of hazardous substances
The total volatile organic compound (TVOC) release rate of the color inkjet cartridge during operation shall not exceed 18 mg/h; monochrome inkjet boxers
The total volatile organic compound (TVOC) release rate at the time of use shall not exceed 10 mg/h.
5.5 Recycling and disposal
5.5.1 The enterprise shall establish a product recycling system for recycling its own products for reuse or recycling;
Household recycling route.
5.5.2 The recycling rate of the recycled inkjet cartridge should be above 60%, and the recycling rate should be above 90% (mass fraction, and should be removed)
The quality of the ink).
5.6 Packaging materials
5.6.1 The total amount of lead (Pb), mercury (Hg), cadmium (Cd) and hexavalent chromium (Cr6) shall not exceed 100 mg/kg.
5.6.2 The marking on the plastic packaging material shall comply with the requirements of GB/T 16288.
5.7 Production process requirements
5.7.1 CFCs, carbon tetrachloride (CCl4) and 1,1,1-trichloroethane (C2H3Cl3) shall not be used in the production process.
And hydrofluorocarbons (HCFCs) as detergents.
5.7.2 Remanufactured inkjet cartridge manufacturers should remove the original label of the inkjet cartridge.
5.8 Public Information Requirements
The following information should be included in the product description.
a) the name of the product;
b) company name (or company product brand name);
c) contact information;
d) product recovery information;
e) a new mark on the remanufactured inkjet cartridge and its outer packaging that is clearly distinguishable from the original mark, indicating the regenerative words;
f) product use methods, recommendations for disposal of products and residual inks therein;
g) The product cannot be forcibly opened, it should be prevented from coming into contact with the skin due to improper operation, and when the skin is in contact with the ink.
How to deal with water;
h) Keep the product away from children.
6 Test methods
6.1 Technical content The detection of volatile organic compounds (TVOC) in 5.4 is carried out in accordance with the method specified in HJ/T 424-2008.
6.2 Other requirements in the technical content shall be verified by means of document review combined with on-site inspection, and relevant certification materials shall be issued by the enterprise.
And statement, fill in Appendix A and Appendix B as required.
Appendix A
(normative appendix)
Declaration and list
statement
The contents of the following are filled out by our company and carefully verified.
Our company officially promises that all the following contents are true and valid. Our company will bear all kinds of problems caused by the incompleteness of the filling.
fruit.
(company signature)
year month day
List
Whether the content
Product environmental design requirements
The product is designed without components, structures and functions that prevent the product from being reused.
Such as the chip function of the product, etc.
The recyclability of the new inkjet cartridge is over 95% (mass ratio, and the quality of the ink should be removed)
Polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE) or chlorinated alkanes are not used in the product (specifically, the chain carbon content is 10 to 13, chlorine is contained.
Alkane compounds with a concentration of more than 50%)
Design requirements with reusable parts
For parts that are not easily peeled off, the same material as the pasted part is used, or the material that does not affect recycling is used.
Plastic parts requirements (for remanufactured inkjet cartridges only for replacement parts)
Chlorine-free plastic is not used in the plastic housing of the product
No more than 4 kinds of polymers, copolymers or copolymer mixtures used in the outer casing of the product, and easy to decompose
The content of heavy metals such as lead (Pb), mercury (Hg), cadmium (Cd) and hexavalent chromium (Cr6) in plastic parts meets the requirements of SJ/T 11363
ink
The ink used in the product meets the requirements of HJ 567
Recycling and disposal
The company has established a product recycling system for recycling its own products for reuse and recycling; and clearly informs users of recycling.
way
The recycling rate of the recycled inkjet cartridge is over 60%, the recycling rate is over 90% (mass ratio, and the quality of the ink should be removed)
the amount)
Packaging material
The total amount of lead (Pb), mercury (Hg), cadmium (Cd) and hexavalent chromium (Cr6) in the product packaging materials is not more than 100 mg/kg.
The mark on the plastic packaging material meets the requirements of GB/T 16288
Production process requirements
The products do not use CFCs, carbon tetrachloride (CCl4), 1,1,1-trichloroethane (C2H3Cl3) and hydrochlorofluorocarbon in the production process.
Carbon (HCFCs) as a cleaning agent
Remanufactured inkjet cartridges remove the original label of the inkjet cartridge during production
Public information requirements (the following information is included in the product description)
product name
Company name (or company product brand name)
Contact information
Product recycling information
A new logo on the remanufactured inkjet cartridge and its outer packaging that is clearly distinguished from the original logo, indicating the recycled words
Product use methods, recommendations for disposal of products and residual inks
The product cannot be forcibly opened, it should be prevented from coming into contact with the skin due to improper handling of the ink, and when the skin is in contact with the ink,
How to deal with
Keep the product away from children
Appendix B
(normative appendix)
Product material list
Part name Material quality/g Recyclable
total
Quality fraction of recyclable parts /%
......
| Standard ID | HJ 573-2010 (HJ573-2010) | | Description (Translated English) | Technical requirement for enviromental labeling products. Ink-jet cartridge | | Sector / Industry | Environmental Protection Industry Standard | | Classification of Chinese Standard | A17 | | Classification of International Standard | 87.080 | | Word Count Estimation | 8,834 | | Date of Issue | 2010-05-04 | | Date of Implementation | 2010-07-01 | | Quoted Standard | GB 18455; GB/T 16288; GB/T 20861-2007; HJ 567; HJ/T 424-2008; SJ/T 11363 | | Drafting Organization | Ministry of Environmental Protection and Development Center | | Regulation (derived from) | Department of Environmental Protection Notice No. 41 of 2010 | | Summary | This standard specifies the inkjet cartridges environmental labeling products of terms and definitions, basic requirements, technical contents and testing methods. This standard applies to the use of inkjet imaging equipment, inkjet cartridges, including the new inkjet cartridges and recycled inkjet cartridges. This standard does not apply to continuous print speed is greater than 60/min, and print speed is greater than 70/min inkjet inkjet cartridges used by the device. |
|