HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189759 (26 Jun 2022)

HG/T 3247-2017 (HGT 3247-2017)

Chinese standards (related to): 'HG/T 3247-2017'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
HG/T 3247-2017English285 Add to Cart 0--3 minutes. Auto immediate delivery. Potassium perchlorate for industrial use HG/T 3247-2017 Valid HGT 3247-2017
HG 3247-2008English609 Add to Cart 3 days [HG/T 3247-2008] Potassium perchlorate for industrial use HG 3247-2008 Obsolete HG 3247-2008
HG/T 3247-2000English319 Add to Cart 3 days Potassium perchlorate for industrial use HG/T 3247-2000 Obsolete HGT 3247-2000
HG 3247-1987EnglishRFQ ASK 3 days (Chinese Industry Standard) HG 3247-1987 Obsolete HG 3247-1987


   
BASIC DATA
Standard ID HG/T 3247-2017 (HG/T3247-2017)
Description (Translated English) Potassium perchlorate for industrial use
Sector / Industry Chemical Industry Industry Standard (Recommended)
Classification of Chinese Standard G12
Classification of International Standard 71.060.50
Word Count Estimation 18,123
Date of Issue 2017-11-07
Date of Implementation 2018-04-01
Older Standard (superseded by this standard) HG/T 3247-2008
Quoted Standard GB 190-2009; GB/T 191-2008; GB/T 3051-2000; GB/T 6003.1-2012; GB/T 6678; GB/T 6682-2008; GB/T 8170; GB 10631-2013; GB 12268-2012; GB 12463-2009; HG/T 3696.1; HG/T 3696.2; HG/T 3696.3; JJG 119-2005
Drafting Organization Jiangxi Tonggu County Yongning Chemical Co., Ltd.
Administrative Organization National Chemical Standardization Technical Committee Inorganic Chemical Subcommittee
Regulation (derived from) Ministry of Industry and Information Technology Bulletin 2017 No. 48
Summary This standard specifies the requirements, test methods, inspection rules, marking, labeling, packaging, transportation and storage of industrial potassium perchlorate.


HG/T 3247-2017: PDF in English (HGT 3247-2017)
HG/T 3247-2017
HG
CHEMICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.060.50
G 12
Record No.: 60522-2018
Replacing HG/T 3247-2008
Potassium Perchlorate for Industrial Use
工业高氯酸钾
ISSUED ON: NOVEMBER 07, 2017
IMPLEMENTED ON: APRIL 01, 2018
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Molecular Formula and Relative Molecular Mass ... 6
4 Classification ... 6
5 Requirements ... 7
6 Test Methods ... 7
7 Inspection Rules ... 26
8 Markings and Labels ... 27
9 Packaging, Transportation and Storage ... 27
Potassium Perchlorate for Industrial Use
Warning: According to the provisions of Clause 6 in GB 12268-2012, this product
belongs to the oxidizing substances of item 5.1 in category 5. Care shall be taken
during operation. Personnel using this standard shall have practical experience
working in formal laboratory. This standard does not point out all possible safety
issues. It is the user's responsibility to take appropriate safety and health
measures and to ensure compliance with the conditions stipulated by relevant
national regulations.
1 Scope
This Standard specifies the requirements, test methods, inspection rules, marking,
labels, packaging, transportation, and storage of potassium perchlorate for industrial
use.
This Standard is applicable to potassium perchlorate for industrial. This product is
mainly used to manufacture fireworks and firecrackers, safety matches, meteorological
rockets, civil ignition coal, oxidants, and automobile airbags, etc.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB 190-2009 Packing Symbol of Dangerous Goods
GB/T 191-2008 Packaging - Pictorial Marking for Handling of Goods
GB/T 3051-2000 Inorganic Chemical Products for Industrial Use - General Method
for Determination of Chloride Content - Mercurimetric Method
GB/T 6003.1-2012 Test Sieves - Technical Requirements and Testing - Part 1: Test
Sieves of Metal Wire Cloth
GB/T 6678 General Principles for Sampling Chemical Products
GB/T 6682-2008 Water for Analytical Laboratory Use - Specification and Test
Methods
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and
Judgement of Limiting Values
GB 10631-2013 Safety and Quality for Fireworks
GB 12268-2012 List of Dangerous Goods
GB 12463-2009 General Specifications for Transport Packages of Dangerous
Goods
HG/T 3696.1 Inorganic Chemicals for Industrial Use - Preparations of Standard
and Reagent Solutions for Chemical Analysis - Part 1: Preparations of Standard
Volumetric Solutions
HG/T 3696.2 Inorganic Chemicals for Industrial Use - Preparations of Standard
and Reagent Solutions for Chemical Analysis - Part 2: Preparations of Standard
Solutions for Impurity
HG/T 3696.3 Inorganic Chemicals for Industrial Use - Preparations of Standard
and Reagent Solutions for Chemical Analysis - Part 3: Preparation of Reagent
Solutions
JJG 119-2005 Verification Regulation of Laboratory pH Meters
Provisions on the Administration of the Road Transport of Dangerous Goods
Rule for the Waterway Transport of Dangerous Goods
Provisions on Supervision and Administration of Transport Safety of Railway
Dangerous Goods
Interim Provisions on the Administration of Transport of Railway Dangerous Goods
3 Molecular Formula and Relative Molecular Mass
Molecular formula: KClO4
Relative molecular mass: 138.55 (according to 2016 international relative atomic mass)
4 Classification
Potassium perchlorate for Industrial use is divided into Type-I and Type-II; and its main
uses are as follows:
---Type-I products are mainly used for meteorological rocket propulsion, oxidants,
6.3.4.1 Preparation of test solution
Take about 1g pre-ground powder sample, accurate to 0.0002g. Place it in a nickel
crucible; add 6g of sodium nitrite ground into powder; and mix thoroughly. Cover it; put
in a high-temperature furnace; gradually raise the temperature to 500°C; melt at this
temperature for 1.5 h. Cool off; dissolve the melt by hot water and wash into the beaker.
Cool off and transfer all to a 250 mL (V1) volumetric flask; dilute to the mark by water;
and shake well.
6.3.4.2 Test
Pipette 50 mL (V2) of test solution into a 500mL conical flask; add 50mL of silver nitrate
standard titration solution and 15mL of nitric acid solution by a pipette; and heat to all
nitrogen dioxide gas escape. Cool off, add 5mL of nitrobenzene; and shake for 30s.
Add 5mL of ferric ammonium sulfate indicator solution and use potassium thiocyanate
standard titration solution to titrate until the solution appears red. Do a blank test at the
same time.
6.3.5 Test data processing
The content of potassium perchlorate is calculated by the mass fraction w1 of
potassium perchlorate (KCIO4), and is calculated according to Formula (1):
Where:
V0 - the volume of potassium thiocyanate standard titration solution consumed by
titration of blank solution, in mL;
V - the volume of potassium thiocyanate standard titration solution consumed by
titration of test solution, in mL;
c - Accurate value of the concentration of potassium thiocyanate standard titration
solution, in mol/L;
M - The value of the molar mass of potassium perchlorate (KClO4), in (g/mol)
(M=138.6);
m – value of mass of the sample, in g;
V1 – value of volume of test solution in 6.3.4.1, in mL;
V2 – value of volume of the transferred test solution in 6.3.4.2, in mL;
6.5 Determination of chloride content
6.5.1 Principle
According to Clause 3 of GB/T 3051-2000.
6.5.2 Reagents and materials
According to Clause 4 of GB/T 3051-2000.
6.5.3 Test procedures
Take about 10g of sample, accurate to 0.01g. Place it in a 250mL conical flask; add
100mL of water; and heat until the sample is completely dissolved. Cool off, add 2~3
drops of bromophenol blue indicator solution; titrate the nitric acid solution (1mol/L)
until it is just yellow, and then add 2~3 drops in excess. Add 1mL of phenylazoformic
acid 2-phenylhydrazide indicator solution; and titrate by mercury
nitrate standard titration solution until the solution turns from yellow to purple. Do a
blank test at the same time. The treatment of mercury-containing waste liquid shall be
carried out in accordance with Appendix D in GB/T 3051-2000.
6.5.4 Test data processing
The chloride content is calculated by the mass fraction w3 of potassium chloride (KCl),
and is calculated according to Formula (3):
Where:
V – value of volume of mercury nitrate standard titration solution consumed by titration
of test solution, in mL;
V0 – value of volume of mercury nitrate standard titration solution consumed by titration
of blank solution, in mL;
c – accurate value of the concentration of mercury nitrate standard titration solution, in
mol/L;
M – value of mole mass of chloride (by KCl), in (g/mol) (M=74.55);
m – value of mass of the sample, in g.
The arithmetic mean of the parallel determination results is taken as the determination
0.2mL, the adding amount of ferrous ammonium sulfate standard titration solution shall
be appropriately increased (accurately add by a pipette). Do a blank test at the same
time.
6.6.5 Test data processing
The content of chlorate is calculated by the mass fraction w4 of potassium chlorate
(KC1O3), and is calculated according to Formula (4):
Where:
V0 – value of volume of the potassium permanganate standard titration solution
consumed by titration of blank solution, in mL;
V - value of volume of the potassium permanganate standard titration solution
consumed by titration of test solution, in mL;
c – accurate value of the concentration of the potassium permanganate standard
titration solution, in mol/L;
M – value of mole mass of the potassium chlorate , in (g/mol) (M=20.42);
m – value of mass of the sample, in g.
The arithmetic mean of the parallel determination results is taken as the determination
result; and the absolute difference between the two parallel determination results shall
be no more than 0.003%.
6.7 Determination of hypochlorite content
6.7.1 Principle
The hypochlorite (ClO-) in the test solution may oxidize the iodide ion into iodine (I2);
and use starch-potassium iodide test paper to determine whether there is hypochlorite
in the sample. The main reaction formula is as follows:
6.7.2 Reagents and materials
Starch-potassium iodide test paper.
6.7.3 Test procedures
Where:
V – value of volume of the sodium thiosulfate standard titration solution consumed by
titration of test solution, in mL;
V0 – value of volume of the sodium thiosulfate standard titration solution consumed by
titration of blank solution, in mL;