Powered by Google www.ChineseStandard.net Database: 189759 (7 Jul 2024)

GB/T 9766.5-2016 related PDF English

GB/T 9766.5-2016 (GB/T9766.5-2016, GBT 9766.5-2016, GBT9766.5-2016) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 9766.5-2016English100 Add to Cart 0-9 seconds. Auto delivery. Test methods for tyre valves -- Part 5: Test methods for large core chamber tyre valves GB/T 9766.5-2016 Valid GBT 9766.5-2016
GB/T 9766.5-2009English239 Add to Cart 3 days Test method for tyre valve -- Part 5: Test methods for tyre valves for large core chamber GB/T 9766.5-2009 Obsolete GBT 9766.5-2009
Buy with any currencies (Euro, JPY, KRW...): GB/T 9766.5-2016    Preview this PDF: GB/T 9766.5-2016



GB/T 9766.5-2016: PDF in English (GBT 9766.5-2016)
GB/T 9766.5-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.01
G 41
Replacing GB/T 9766.5-2009
Test Methods for Tyre Valves -
Part 5: Test Methods for Large Core Chamber Tyre Valves
ISSUED ON: FEBRUARY 24, 2016
IMPLEMENTED ON: JANUARY 1, 2017
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Test Equipment, Instruments and Apparatuses ... 5
5 Sealing Performance Test ... 6
6 Corrosion Resistance Test ... 10
7 Assembly Torque Test ... 10
Foreword
GB/T 9766 Test Method for Tyre Valves is divided into seven parts:
---Part 1: Test Method for Tube Clamp-in Valves;
---Part 2: Rubber Base Valves Test Methods;
---Part 3: Test Methods for Snap-in Valves;
---Part 4: Test Methods for Tubeless Clamp-in Valves;
---Part 5: Test Methods for Large Core Chamber Tyre Valves;
---Part 6: Test Method for Core;
---Part 7: Test Methods for Components.
This is Part 5 of GB/T 9766.
This Part was drafted in accordance with the rules provided in GB/T 1.1-2009.
This Part serves as a replacement of GB/T 9766.5-2009 Test Method for Tyre Valve - Part 5:
Test Methods for Tyre Valves for Large Core Chamber. In comparison with GB/T 9766.5-2009,
the main technical changes are as follows:
---The accuracy grade of the pressure gauge is modified (see 4.3; 4.3 of Version 2009);
---The valve base and test plate hole size corresponding to the tubeless valves are added
(see Table 1);
---The valve hole size and plate thickness are modified (see Figure 2; Figure 2 of Version
2009);
---The valve sealing performance test is modified (see 5.1.1, 5.1.2 and 5.1.3; 5.1.1, 5.1.2
and 5.1.3 of Version 2009);
---The tubeless valve and valve hole sealing performance test is modified (see 5.2.1, 5.2.2,
5.2.3 and 5.2.4; 5.2.1, 5.2.2 and 5.2.3 of Version 2009);
---“The entrained gas during the installation is not considered as a leak” is added (see 5.1.2,
5.1.3, 5.2.3 and 5.2.4);
---The corrosion resistance test is modified (see Chapter 6; Chapter 6 of Version 2009);
---The assembly torque test is modified (see Chapter 7; Chapter 7 of Version 2009).
This Part was proposed by China Petroleum and Chemical Industry Federation.
Test Methods for Tyre Valves - Part 5: Test Methods for
Large Core Chamber Tyre Valves
1 Scope
This Part of GB/T 9766 specifies the terms and definitions, test equipment, instruments and
apparatuses of large core chamber tyre valves (hereinafter referred to as “valves”) test, as well
as sealing performance test, corrosion resistance test and assembly torque test.
This Part is applicable to the test of valves for pneumatic tyres of large-scale construction
machinery, such as: heavy-duty dump trucks, loaders, excavators, scrapers, road rollers and
graders, etc.
2 Normative References
The following documents are indispensable to the application of this document. In terms of
references with a specified date, only versions with a specified date are applicable to this
document. In terms of references without a specified date, the latest version (including all the
modifications) is applicable to this document.
GB 1796.5 Tyre Valves - Part 5: Tyre Valves for Large Core Chamber
GB 1796.6 Tyre Valves - Part 6: Cores
GB/T 10125-2012 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
GB/T 12716-2011 Pipe Threads with the Thread Angle of 60 Degrees where Pressure-tight
Joints Are Made on Threads
GB/T 12839 Terms and Definitions of Tyre Valves
3 Terms and Definitions
The terms and definitions defined in GB/T 12839 are applicable to this document.
4 Test Equipment, Instruments and Apparatuses
4.1 High-temperature test chamber: the temperature in the chamber can reach above 200 C and
the temperature fluctuation is  2 C.
4.2 Low-temperature test chamber: the temperature in the chamber can reach below  40 C
and the temperature fluctuation is  2 C.
4.3 Pressure gauge: with an indicating value of 0 kPa ~ 2,500 kPa and an accuracy grade of
Grade 1.6.
4.4 Stopwatch.
4.5 Special-purpose torque wrench: with an accuracy grade of 5%.
4.6 Valve sealing performance test device (see Figure 1).
4.7 Valve and valve hole sealing performance test device (see Figure 2).
4.8 Salt spray test chamber: the temperature in the chamber is 10 C ~ 50 C and the salt spray
precipitation rate is 1 mL/(80 cm2  h) ~ 2 mL/(80 cm2  h).
5 Sealing Performance Test
5.1 Valve Sealing Performance Test
5.1.1 Valve sealing performance test at room temperature
At room temperature, use a special-purpose torque wrench to install Type H02 valve core that
complies with GB 1796.6 in the test valve core chamber of the test device shown in Figure 1
with a torque of 0.34 N  m ~ 0.56 N  m. Put the test device into the water; maintain the axis
of the valve base and the axis of the valve core at the same horizontal positon, and the distance
from the water surface shall not exceed 30 mm. Introduce (35  5) kPa of compressed air;
within 60 s, observe and record whether there are bubbles escaping from the joints between the
valve body or the core sleeve and the valve core, the valve body and the valve base, the core
sleeve or coupling sleeve and the valve base.
The entrained gas during the installation is not considered as a leak.
......

BASIC DATA
Standard ID GB/T 9766.5-2016 (GB/T9766.5-2016)
Description (Translated English) Test methods for tyre valves -- Part 5: Test methods for large core chamber tyre valves
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G41
Classification of International Standard 83.160.01
Word Count Estimation 7,732
Date of Issue 2016-02-24
Date of Implementation 2017-01-01
Older Standard (superseded by this standard) GB/T 9766.5-2009
Quoted Standard GB/T 1796.5; GB 1796.6; GB/T 10125-2012; GB/T 12716-2011; GB/T 12839
Drafting Organization Jiangxi valve core plant; Shandong Gaotian Metal Manufacturing Co., Ltd; Shanghai Baolong Automotive Corporation; Anhui MSC Machinery Manufacturing Co., Ltd.
Administrative Organization National tire rim for Standardization Technical Committee (SAC/TC 19)
Regulation (derived from) National Standard Announcement No
Proposing organization China Petroleum and Chemical Industry Federation
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the terms and definitions of the test for large-bore valve (hereinafter referred to as "valve"), test equipment, instrumentation, sealing test, corrosion resistance test, assembly torque test. This standard applies to heavy-duty dump trucks, loaders, excavators, scrapers, road rollers and graders and other large construction machinery pneumatic tires with the valve test.