GB/T 9254.2-2021 (GB/T9254.2-2021, GBT 9254.2-2021, GBT9254.2-2021) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB/T 9254.2-2021 | English | 1259 |
Add to Cart
|
8 days
|
Information technology equipment, multimedia equipment and receivers -- Electromagnetic compatibility -- Part 2: Immunity requirements
|
GB/T 9254.2-2021
| Valid |
GBT 9254.2-2021
|
GB/T 9254.2-2021: PDF in English (GBT 9254.2-2021)
GB/T 9254.2-2021
Information technology equipment, multimedia equipment and receivers -- Electromagnetic compatibility -- Part 2.Immunity requirements
ICS 33.100.20
CCSL06
National Standards of People's Republic of China
Replacing GB/T 9383-2008, GB/T 17618-2015
Information technology equipment, multimedia equipment and receivers
Electromagnetic Compatibility Part 2.Immunity Requirements
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms, Definitions and Abbreviations 2
3.1 Terms and Definitions 2
3.2 Abbreviations 5
4 Test project requirements 7
4.1 General requirements7
4.2 Specific requirements8
5 Immunity requirements 10
6 Test Documentation 14
6.1 Test report 14
6.2 Manufacturer's recommendations to users 14
7 Test configuration 14
8 Performance criteria 15
8.1 Overview 15
8.2 Performance criteria A 15
8.3 Performance Criterion B 15
8.4 Performance Criterion C 16
9 Standards compliance 16
10 Measurement uncertainty 16
Appendix A (Normative) Broadcast Reception Function 17
A.1 Overview 17
A.2 Applicability 17
A.3 Operating Mode 17
A.4 Supplementary test levels and performance criteria 19
Appendix B (normative) print function 20
B.1 Applicability 20
B.2 Operating Mode 20
B.3 Performance criteria 20
Appendix C (Normative) Scanning Function 22
C.1 Applicability 22
C.2 Operating Mode 22
C.3 Performance criteria 22
Appendix D (normative) Display and Display Output Function 23
D.1 Applicability 23
D.2 Operating Mode 23
D.3 Performance criteria 27
Appendix E (normative) Tone Generation Function 28
E.1 Applicability 28
E.2 Operating Mode 28
E.3 Performance criteria 28
Appendix F (normative) Network functions 30
F.1 Applicability 30
F.2 Special terms used in this appendix30
F.3 General requirements for network functions 30
F.4 Requirements for CPE containing xDSL ports 32
Appendix G (normative) Audio output function 35
G.1 Applicability 35
G.2 Terms used in this appendix35
G.3 General 36
G.4 Reference level 37
G.5 Operating Mode 37
G.6 Measurement methods 38
G.7 Performance criteria 40
G.8 Example of test arrangement 41
Appendix H (Normative) Telephone Features 44
H.1 Applicability 44
H.2 Overview 44
H.3 Mode of Operation 44
H.4 Performance criteria 45
Appendix I (informative) Immunity to specific radio technologies operating at frequencies of 700 MHz and above46
Appendix J (informative) Examples of how to use this document48
J.1 Purpose 48
J.2 Develop a pilot plan 48
J.3 Detailed examples 49
Reference 56
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is part 2 of GB/T 9254 "Information Technology Equipment, Multimedia Equipment and Receivers Electromagnetic Compatibility". GB/T 9254
The following sections have been published.
--- Part 1.Launch requirements.
--- Part 2.Immunity requirements.
This document replaces GB/T 9383-2008 "Sound and TV Broadcasting Receivers and Related Equipment Immunity Limits and Measurement Methods"
And GB/T 17618-2015 "Information Technology Equipment Immunity Limits and Measurement Methods". This document integrates GB/T 9383-2008
Compared with the technical content of the two documents GB/T 17618-2015, compared with the above two documents, except for structural adjustment and editorial changes, the main technical
The changes are as follows.
--- Wider scope of application, suitable for multimedia equipment, including multimedia equipment for professional use and GB/T 9383-2008 and
GB/T 17618-2015 applicable equipment;
--- Added the relevant content of EUT function divided into direct function and indirect function (see 4.1);
--- Delete the input immunity test (see 4.3.1, 4.3.2, 5.3 of GB/T 9383-2008);
--- Delete the shielding effect test (see 4.3.4 and 5.5 of GB/T 9383-2008);
--- Deleted the radio frequency electromagnetic field keying carrier test (see 4.7, 5.8.5 of GB/T 9383-2008);
--- Increased the immunity test of broadband pulse conducted disturbance (see 4.2.7, Table 2, F.4.2.2, F.4.3.1).
This document is modified to adopt CISPR35.2016 "Electromagnetic Compatibility Immunity Requirements for Multimedia Equipment".
Compared with CISPR35.2016, this document has no structural adjustment. The technical differences and their reasons are as follows.
--- Regarding normative references, this document adds references to GB 3174, GB/T 4365, ISO /IEC 17025.2005, and deletes
IEEE802.3, in order to adapt to the technical conditions of our country.
--- Delete the definition of EUT (3.1.15) and add it to 3.2 as an abbreviation (see Chapter 3). As an abbreviation more
It is helpful to understand this document, so delete and add this content.
---Change "The working voltage and frequency of the EUT should consider the situation that meets the specifications of the EUT in the target market; at 230V (±10V)
And/or 110V (±10V) rated voltage test, the frequency is 50Hz or 60Hz, which can usually meet the requirements of EUT for global use.
"Use;" is "the working voltage and frequency should meet the specifications of the EUT;" (see Chapter 5). Since our country has a relatively common rated
voltage, so change this.
--- Changed the example of digital broadcasting signal parameters (see Table A.1). Due to the special requirements of my country's broadcasting system, this
content.
---Added "The EUT that establishes communication through the wireless network, during the test, the applied disturbance signal frequency should not be in the EUT's
within the working frequency band. ” (see Table H.1). Since my country’s wireless communication system has its special requirements, this content is added.
--- Change the "800MHz" in the title of Appendix I and the relevant position of the appendix to "700MHz", and increase the relevant content of 5G mobile communication.
content (see Appendix I). Since our country's wireless communication system has its special requirements, this content is changed and added.
--- Removed the abbreviations AAN, AC-3, ANSI, AV, BPSK, CM, CMAD, CVP, DMB, DMB-T, DOCSIS,
DQPSK, DSLAM, DVB-T/T 2, EFT/B, EM, ETSI, FEXT, FSOATS, F/UTP, GTEM, HDD,
HID, IF, IP, ISDB, ISDB-C, ISDB-T, ISDB-S, ISDN-NT, ITU-R, JCTEA, LO, LTE, NSA,
NTSC, OATS, PC, PCM, PSU, REIN, RVC, SAC, SCTE, SECAM, SIP, TC8PSK, TV, UFA,
UHF, UMTS, U/UTP, VCR, VHF, VSB, WAN, Wi-Fi, xBase-T, added acronyms ABS-S,
CMMB, DTMB (see Chapter 3). Since the abbreviations deleted above are related to broadcast signal standards and
The content of the relevant institutions may not appear in this document, and the added abbreviation is the content of the broadcast signal system in our country, so delete it.
Remove and add to this.
--- Change the point frequency test in the radiated disturbance immunity of the 1GHz~6GHz frequency band to the sweep frequency test, and increase the radio frequency of the telephone function
Frequency electromagnetic field disturbance additional point-frequency test of the following frequencies. 1.8GHz, 2.6GHz, 3.5GHz, 5GHz (see Chapter 5). Depend on
Due to the rapid development of related technologies in my country, the radiated disturbance immunity in the 1GHz~6GHz frequency band is subjected to sweep frequency tests and 1GHz~
The additional point frequency test of radio frequency electromagnetic field disturbance of the telephone function in the 6GHz band is necessary, so this content is changed and added.
--- Changed the performance criteria of the network function (see Appendix F). Since it is necessary to specify the static network function according to the relevant verification test conclusions
The concept of the error rate at the level, and it is necessary to appropriately relax the performance criteria of F.4.3, so this content is changed.
--- Added the relevant parameters of FAST (G.fast) (see Appendix F). Due to the rapid development of related technologies in my country, this increase
content.
The following editorial changes have been made to this document.
--- Change the name of this document to "Information Technology Equipment, Multimedia Equipment and Receivers Electromagnetic Compatibility Part 2.Immunity
Require".
---Changed "The measurement point suitable for 625-line camera is at the midpoint of line 160" to "The measurement point suitable for 325-line camera is at the midpoint of line 160"
160 line" (see Table D.2). This is changed due to an error in the International Standard.
--- Deleted the abbreviation SES (see Chapter 3), and changed "SES" in F.4.2.2 to "Severely Errored Seconds". Due to international standards
The wording is incorrect, so this content has been changed.
--- Change "Not Applicable" to "Use the Display Criteria in Appendix D to Indirectly Evaluate Network Functions" (see Table J.4). Due to the international standard table
There is an error in the description, so this content is changed.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Radio Interference Standardization Technical Committee (SAC/TC79).
This document is drafted by. The Third Research Institute of China Electronics Technology Group Corporation, China Electronics Technology Standardization Institute, Huawei Technologies Co., Ltd.
Company, China Academy of Information and Communications Technology, Beijing Zunguan Technology Co., Ltd., Shanghai Institute of Quality Supervision and Inspection Technology, Nanjing Rong Testing Technology Co., Ltd.
Technology Co., Ltd., Radio and Television Planning Institute of the State Administration of Radio and Television, Lenovo (Beijing) Co., Ltd., the Fifth Research Institute of Electronics of the Ministry of Industry and Information Technology
Institute, CCIC Southern Testing Co., Ltd., Weikai Testing Technology Co., Ltd., China Institute of Metrology, China Quality Certification Center
Heart, Beijing Futest Electronic Instrument Co., Ltd.
The main drafters of this document. Xu Wei, Lin Jingping, Li Huanran, Zhang Qiang, Zhang Xinghai, Zhou Yi, Liu Chunyan, Xu Chunfeng, Chen Yegang, Zhang Xia, Cai Xiaomei,
Lv Feiyan, Chen Hui, Zhu Qi, Zeng Bo, Hong Li, Zhu Lin, Landford, Chen Qingmei, Zhou Xiaolan.
The previous versions of this document and its superseded documents are as follows.
---First published in 1988 as GB 9383-1988, first revised in.1995, and second revised in.1999, GB 9383-
1995, GB/T 13838-1992 and GB/T 13839-1992 were merged to form GB/T 9383-1999, the third in.2008
The second revision is GB/T 9383-2008;
---First published in.1998 as GB/T 17618-1998, and first revised as GB/T 17618-2015 in.2015;
--- This revision merges GB/T 9383-2008 and GB/T 17618-2015.
introduction
To standardize the electromagnetic compatibility of information technology equipment, multimedia equipment and receivers, establish sound electromagnetic compatibility requirements. emission requirements and
Immunity requirements, GB/T 9254 is intended to be composed of two parts, respectively specifying the electromagnetic compatibility emission of information technology equipment, multimedia equipment and receivers.
radiation requirements and immunity requirements.
--- Part 1.Launch requirements. This part aims to establish electromagnetic compatibility emission requirements for information technology equipment, multimedia equipment and receivers.
To provide sufficient protection for the radio spectrum to ensure that radio services in the 9kHz~400GHz frequency band work as expected
At the same time, the relevant procedures are specified to ensure the reproducibility of the measurement and the repeatability of the results.
--- Part 2.Immunity requirements. This part aims to establish electromagnetic compatibility immunity of information technology equipment, multimedia equipment and receivers
In the frequency range of 0Hz~400GHz, the EUT has a sufficient immunity level, which can be used in the environment where it is used.
It operates as expected in the environment; at the same time, the procedures are specified to ensure the reproducibility of the test and the repeatability of the results.
Information technology equipment, multimedia equipment and receivers
Electromagnetic Compatibility Part 2.Immunity Requirements
1 Scope
This document applies to information technology equipment (3.1.18), audio equipment with a rated AC voltage RMS or DC voltage not exceeding 600V
(3.1.6), video equipment (3.1.32), broadcast receiving equipment (3.1.7), entertainment lighting control equipment (3.1.14) and combinations thereof.
This document also applies to the above-mentioned equipment for professional use.
Equipment with broadcast reception is within the scope of this document, see Appendix A. Devices with non-broadcast wireless interfaces are also included in this document
However, the performance of these interfaces need not be evaluated against this document.
The frequency bands applicable to this document in the corresponding national standards of other IEC /CISPR standards (except GB/T 9383 and GB/T 17618)
Equipment for which immunity requirements are specified is not included in the scope of this document.
The purpose of this document is to.
--- Put forward requirements in the frequency range of 0Hz~400GHz, so that the EUT has a sufficient level of immunity and can be used in the environment in which it is used.
runs as expected in the environment.
--- Specify procedures to ensure the reproducibility of the test and the repeatability of the results.
Due to the technological convergence of device functions, performance criteria are determined based on functions rather than devices.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB 3174 PAL-D Television Broadcasting Technical Specification
GB/T 4365 Electrotechnical Terminology Electromagnetic Compatibility
GB/T 6113.102-2018 Specification for Radio Disturbance and Immunity Measurement Equipment and Measurement Methods Part 1-2.Radio Disturbance
Coupling device for conducted disturbance measurement with immunity measuring equipment (CISPR16-1-2.2014, IDT)
GB/T 17626.2-2018 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test (IEC 61000-4-2.2008,
IDT)
GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test (IEC 61000-4-
3.2010, IDT)
GB/T 17626.4-2018 Electromagnetic Compatibility Test and Measurement Technology Electrical Fast Transient Burst Immunity Test (IEC 61000-
4-4.2012, IDT)
GB/T 17626.11-2008 Electromagnetic Compatibility Test and Measurement Technology Voltage Dips, Short Interruptions and Voltage Change Immunity
Test (IEC 61000-4-11.2004, IDT)
GB/T 17626.20-2014 Electromagnetic Compatibility Test and Measurement Technology Transverse Electromagnetic Wave (TEM) Waveguide Emission and Immunity Test
Test (IEC 61000-4-20.2010, IDT)
GB/T 17626.21-2014 Electromagnetic compatibility test and measurement technology Mixing chamber test method (IEC 61000-4-21.2011,
IDT)
ISO 9241-3.1992 Ergonomics at work in offices with visual display terminals - Part 3.Requirements for visual displays
......
| Standard ID | GB/T 9254.2-2021 (GB/T9254.2-2021) | | Description (Translated English) | Information technology equipment, multimedia equipment and receivers -- Electromagnetic compatibility -- Part 2: Immunity requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L06 | | Classification of International Standard | 33.100.20 | | Word Count Estimation | 63,694 | | Date of Issue | 2021-12-31 | | Date of Implementation | 2022-07-01 | | Drafting Organization | The Third Research Institute of China Electronics Technology Group Corporation, China Electronics Standardization Research Institute, Huawei Technologies Co., Ltd., China Academy of Information and Communications Technology, Beijing Zunguan Technology Co., Ltd., Shanghai Institute of Quality Supervision and Inspection Technology, Nanjing Rong Testing Technology Co., Ltd. Company, Radio and Television Planning Institute of the State Administration of Radio and Television, Lenovo (Beijing) Co., Ltd., the Fifth Electronics Research Institute of the Ministry of Industry and Information Technology, China Inspection Group Southern Testing Co., Ltd., Weikai Testing Technology Co., Ltd., China Metrology Research Institute , China Quality Certification Center, Beijing Futest Electronic Instrument Co., Ltd. | | Administrative Organization | National Radio Interference Standardization Technical Committee (SAC/TC 79) | | Proposing organization | National Radio Interference Standardization Technical Committee (SAC/TC 79) | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
|