GB/T 5008.2-2023 (GB/T5008.2-2023, GBT 5008.2-2023, GBT5008.2-2023) & related versions
GB/T 5008.2-2023: PDF in English (GBT 5008.2-2023)
GB/T 5008.2-2013
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.220.20
K 84
Replacing GB/T 5008.2-2005, GB/T 5008.3-2005
Lead-acid Starter Batteries - Part 2.Dimensions of Batteries
and Dimensions and Marking of Terminals
(IEC 60095-2.2009, MOD)
ISSUED ON. FEBRUARY 7, 2013
IMPLEMENTED ON. JULY 1, 2013
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the PRC;
Standardization Administration of the PRC.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative References... 6
3 Symbol... 6
4 Model Designation and Polarity Marking of Batteries... 7
5 Classification of Type of Batteries... 9
6 Dimensions and Marking of Terminals of Batteries... 21
Foreword
GB/T 5008 consists of two parts under the general title Lead-acid Starter Batteries.
— Part 1.Technical Conditions and Methods of Test;
— Part 2.Dimensions of Batteries and Dimensions and Marking of Terminals.
This part is Part 2 of GB/T 5008.
This part is drafted in accordance with the rules given in the GB/T 1.1-2009.
This part replaces GB/T 5008.2-2005 Lead-acid Starter Batteries — Kinds of Products and
Specifications and GB/T 5008.3-2005 Lead-acid Starter Batteries — Dimensions and Marking of
Terminals in whole.
In addition to the fixing method of the battery and the dimension of the tapered terminal, this part
has been completely revised with respect to the GB/T 5008.2-2005 and GB/T 5008.3-2005 (the
previous edition). The following technical deviations have been made.
— addition of Clause 3 Symbols.
— modification of Clause 4.“Size and external dimensions of batteries" in the original
standard is revised to "model preparation and marking of the polarity of batteries"; and
deletion of the original standard "a) battery product specifications fixed on the rubber tank";
addition of some product specifications in sub-clauses b) and c) in the original standard
according to China's national conditions and the current use of lead-acid battery products;
see the 5.4 China series in this part for details.
— addition of 4.1 Model designation.
— addition of 4.2 Marking of the polarity.
— editorial changes have also been made on Clauses 5 and 6 of the original standard in
accordance with the IEC standard, which has been redrafted and modified as Clause 5 of
this part.
— addition of Clause 5 Classification and Type of Batteries.
— addition of 6.2 The dimensions of terminals used in Europe (EU).
— addition of 6.3 The dimensions and position of terminals used in North America (AM).
Lead-acid Starter Batteries - Part 2.Dimensions of Batteries
and Dimensions and Marking of Terminals
1 Scope
This part of GB/T 5008 specifies the model designation and marking of the polarity, battery type
and classification, battery terminal position, and dimensions and marking of terminals of lead-acid
battery for starting.
This part is applicable to vented (flooded) lead-acid batteries and valve regulated (gas
recombination) batteries used for starting, lighting and ignition of various automobiles, tractors,
heavy trucks and other internal combustion engines with a nominal voltage of 12 V (hereinafter
referred to as “batteries”).
This standard does not apply to batteries used for other purposes, such as batteries for starting
railway internal combustion engines.
2 Normative References
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
JB/T 2599 Name, Type Organization and Naming Convention of Lead-acid Battery
3 Symbol
For the purpose of this document, the following symbols apply.
a1 — overall length at the battery base with ledges.
a2 — length at the battery base without ledges.
a3 — length at battery lid.
Hh — overall height including lid, plugs and terminals.
h — height of the upper surface M, supporting the hold-down device.
a4 — distance of the inside notches. (see Figure 4).
a5 — distance between terminal and the edges of the lid at the short side (see Figure 4).
a6 — distance of the robotic-grips-segments (see Figure 9 a)).
E — degassing outlet (see Figure 6).
K — terminal cover area and grips (see Figure 3).
M — top clamping area (Figure 3 and Figure 4).
P — positive and negative terminal (see Figure 19).
S — electrolyte indicator (see Figure 8).
T — symbol of the polarity.
U — robotic grips (see Figure 9 c)).
V — injection hole (see Figure 8).
W — universal grip area (see Figure 9 a)).
X — notches on low clamping of the battery (see Figure 5 a)).
Y — low clamping of the battery (see Figure 5 b)).
G — top clamping of the battery (see Figure 5 c)).
4 Model Designation and Polarity Marking of Batteries
4.1 Model designation
The model designation of batteries shall comply with the requirements of JB/T 2599.Specifically,
the product model is represented by the first capital letter "Q" in the pinyin of Chinese character
"qi". The detailed naming is shown in Figure 1 (enterprises can determine "other" feature marking
by themselves according to the actual situation and user requirements. Under special
circumstances, after completing the model designation specified in this part, the model compiled
by oneself may also be added.
......
| Standard ID | GB/T 5008.2-2023 (GB/T5008.2-2023) | | Description (Translated English) | Lead-acid starter batteries -- Part 2: Dimensions of batteries and dimensions and marking of terminals | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K84 | | Classification of International Standard | 29.220.20 | | Word Count Estimation | 34,395 | | Date of Issue | 2023-11-27 | | Date of Implementation | 2024-06-01 | | Older Standard (superseded by this standard) | GB/T 5008.2-2013 | | Drafting Organization | Jiangsu Happy Power (Lianshui) Co., Ltd., Shenzhen Leoch New Energy Development Co., Ltd., Chaowei Power Group Co., Ltd., Zhejiang Guyue Power Co., Ltd., Fengfan (Yangzhou) Co., Ltd., Tianneng Battery Group Co., Ltd., Zhaoqing Leoch Power Technology Co., Ltd., Jiangxi Herunyu Power Technology Co., Ltd., Zhejiang Nandu Power Power Co., Ltd., Zhejiang Jujiang Power Manufacturing Co., Ltd., Guangdong Oakley Group Co., Ltd., Zhushan County Qinba Barium Salt Co., Ltd., Shenyang Battery Research All limited liability companies, Guangxi Xinfeng Power Technology Co., Ltd. | | Administrative Organization | National Lead-Acid Battery Standardization Technical Committee (SAC/TC 69) | | Proposing organization | China Electrical Equipment Industry Association | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
|