Powered by Google www.ChineseStandard.net Database: 189759 (14 Jul 2024)

GB/T 42416-2023 related PDF English

GB/T 42416-2023 (GB/T42416-2023, GBT 42416-2023, GBT42416-2023) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 42416-2023English200 Add to Cart 0-9 seconds. Auto delivery. M100 methanol fuel for motor vehicles GB/T 42416-2023 Valid GBT 42416-2023
Buy with any currencies (Euro, JPY, KRW...): GB/T 42416-2023    Preview this PDF: GB/T 42416-2023

GB/T 42416-2023: PDF in English (GBT 42416-2023)
GB/T 42416-2023
ICS 75.160.20
CCS E 31
M100 methanol fuel for motor vehicles
ISSUED ON: MAY 23, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Technical requirements and test methods ... 6
5 Inspection rules ... 7
6 Marking, packaging, transportation, and storage ... 8
7 Safety ... 8
M100 methanol fuel for motor vehicles
1 Scope
This document specifies the technical requirements, test methods, inspection rules,
marking, packaging, transportation, storage, and safety of M100 methanol fuel for
motor vehicles.
This document is applicable to the production and inspection of M100 methanol fuel
for motor vehicles.
2 Normative references
The following documents contain the provisions which, through normative reference in
this document, constitute the essential provisions of this document. For the dated
referenced documents, only the versions with the indicated dates are applicable to this
document; for the undated referenced documents, only the latest version (including all
the amendments) is applicable to this document.
GB 190 Packing symbol of dangerous goods
GB/T 338-2011 Methanol for industrial use
GB/T 511 Petroleum, petroleum products and additives - Method for determination
of mechanical admixtures
GB/T 2013 Standard test method for density of liquid petrochemical products
GB/T 4472 Determination of density and relative density for chemical products
GB/T 4756 Method for manual sampling of petroleum liquids
GB/T 6283 Chemical products - Determination of water Karl • Fischer method
(general method)
GB/T 6324.2 Test method of organic chemical products - Part 2: Determination of
dry residue after evaporation on a water bath for volatile organic liquids
GB/T 6324.9 Test method of organic chemical products - Part 9: Determination of
GB/T 7534 Volatile organic liquids for industrial use - Determination of boiling
GB/T 8170 Rules of rounding off for numerical values & expression and judgment
of limiting values
GB/T 14039 Hydraulic fluid power - Fluids - Method for coding the level of
contamination by solid particles
GB/T 16483 Safety data sheet for chemical products content and order of sections
GB/T 17476 Determination of multielement of lubricating oils and base oils -
Inductively coupled plasma atomic emission spectrometry (ICP-AES)
GB/T 20082 Hydraulic fluid power - Fluid contamination - Determination of
particulate contamination by the counting method using an optical microscope
GB/T 23510 Fuel methanol for motor vehicles
GB/T 34100 Test method for determination of total sulfur in light hydrocarbons,
spark ignition engine fuel, diesel engine fuel, and engine oil - Ultraviolet
fluorescence method
GB/T 37322 Test method for evaluating gasoline cleanliness - Simulation test of
intake valve deposit (IVD) of gasoline engine
NB/SH/T 0164 Petroleum and related products packaging, storage, transportation
and acceptance of delivery rules
SH/T 0251 Determination of base number of petroleum products (perchloric acid
potentiometric titration method)
SH/T 0604 Crude petroleum and petroleum products - Determination of density -
Oscillating U-tube method
SH/T 0657 Standard test method for trace nitrogen in liquid petroleum
hydrocarbons by syringe/inlet oxidative combustion and chemiluminescence
SH/T 0712 Standard test method for iron in gasoline by atomic absorption
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 M100 methanol fuel for motor vehicles
Motor fuel that consists of methanol and additives.
c) When there is a change in the main raw material supplier, which may affect
the product quality;
d) When the production is resumed after continuous suspension for more than 3
e) When the factory inspection results are quite different from the last type
inspection results.
5.4 Result judgment
The inspection results are judged according to the rounded value comparison method
in GB/T 8170. If any of the inspection results does not meet the requirements, for
barreled products, samples shall be taken from double numbers of packaging units for
re-inspection; for canned products, samples shall be taken at multiple points for re-
inspection; if there are still re-inspection results that do not meet the requirements, the
entire batch of products will be judged to be unqualified.
6 Marking, packaging, transportation, and storage
6.1 Product packaging containers shall be marked with firm marks, the contents of
which include but are not limited to:
a) the name of the manufacturer;
b) the product name;
c) the number of this document;
d) the symbols of "Flammable liquid" and "Poison" specified in GB 190.
6.2 If the products that comply with this document are sold to users, they shall be
marked with "M100 methanol fuel for motor vehicles", and the marks shall be marked
in a place where consumers can easily see them.
6.3 Packaging, transportation, storage, and delivery acceptance shall be carried out in
accordance with the relevant regulations of NB/SH/T 0164.
6.4 Products formulated with different types of additives shall not be mixed for storage
and transportation.
7 Safety
7.1 Safety data and information related to the transportation, storage, use, and accident
handling of M100 methanol fuel for motor vehicles shall be included in the Safety Data

Standard ID GB/T 42416-2023 (GB/T42416-2023)
Description (Translated English) M100 methanol fuel for motor vehicles
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard E31
Classification of International Standard 75.160.20
Word Count Estimation 8,816
Date of Issue 2023-05-23
Date of Implementation 2023-09-01
Drafting Organization Zhejiang Geely Holding Group Co., Ltd., Ningbo Geely Luoyou Engine Parts Co., Ltd., Guangzhou Institute of Mechanical Science Co., Ltd., Shanxi Alcohol Ether Clean Fuel Industry Technology Center (Co., Ltd.), Guizhou Standardization Institute, Zhongrun Oil New Energy Co., Ltd. Co., Ltd., Shaanxi Yanchang Petroleum Energy Technology Co., Ltd., ENN Natural Gas Co., Ltd., Lanzhou Veken Petrochemical Instrument Co., Ltd.
Administrative Organization National Alcohol Ether Fuel Standardization Technical Committee (SAC/TC 414)
Proposing organization National Alcohol Ether Fuel Standardization Technical Committee (SAC/TC 414)
Issuing agency(ies) State Administration for Market Regulation, National Standardization Management Committee