GB/T 4096.1-2022 (GB/T4096.1-2022, GBT 4096.1-2022, GBT4096.1-2022) & related versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
GB/T 4096.1-2022 | English | 125 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
|
GB/T 4096.1-2022
| Valid |
GBT 4096.1-2022
|
GB/T 4096-2001 | English | 399 |
Add to Cart
|
3 days
|
Geometrical product specifications (GPS) -- Series of angles and slopes on prisms
|
GB/T 4096-2001
| Obsolete |
GBT 4096-2001
|
GB/T 4096-1983 | English | 199 |
Add to Cart
|
2 days
|
Series of angles and slopes on wedges and prisms
|
GB/T 4096-1983
| Obsolete |
GBT 4096-1983
|
Buy with any currencies (Euro, JPY, KRW...): GB/T 4096.1-2022 Preview this PDF: GB/T 4096.1-2022
GB/T 4096.1-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 17.040.01
CCS J 04
GB/T 4096.1-2022 / ISO 2538-1:2014
Replacing GB/T 4096-2001
Geometrical product specifications (GPS) - Wedges - Part 1:
Series of angles and slopes
(ISO 2538-1:2014, IDT)
ISSUED ON: OCTOBER 12, 2022
IMPLEMENTED ON: OCTOBER 12, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative references ... 6
3 Terms and definitions ... 6
4 Wedge series ... 9
Annex A (Informative) Relationship to GPS matrix model ... 11
Bibliography ... 13
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020
Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents.
This document is part 1 of GB/T 4096 Geometrical product specifications (GPS) -
Wedges. The following parts have been released for GB/T 4096.
-- Part 1: Series of angles and slopes;
-- Part 2: Dimensioning and tolerancing.
This document replaces GB/T 4096-2001 Geometrical product specifications (GPS) -
Series of angles and slopes on prisms; compared with GB/T 4096-2001, in addition to
structural adjustments and editorial changes, the main technical changes are as follows:
a) Change “prisms” to “wedges” (see Clause 3; Clause 3 of the 2001 edition);
b) Remove the terms and definitions, as well as corresponding diagrams, of prism,
multiple prism, height of prism and thickness of prism (see Clause 2 of the 2001
edition);
c) Combine the three tables of “Series of angles and slopes on general-purpose
prisms”, “Calculated values” and “Special-purpose prisms” into one table (see
Clause 4; Clause 3 and Annex A of the 2001 edition).
This document is identical to ISO 2538-1:2014 Geometrical product specifications
(GPS) - Wedges - Part 1: Series of angles and slopes.
Add the clause “Normative references” in this document;
Please note that some of the contents of this document may involve patents. The issuing
organization of this document is not responsible for identifying patents.
This document shall be under the jurisdiction of National Technical Committee 240 on
Product Dimension and Geometric Element Specifications of Standardization
Administration of China (SAC/TC 240).
Drafting organizations of this document: Shandong Industrial Technology Research
Institute of Zhejiang University, Zhejiang University, Chengdu University of
Information Technology, China Productivity Center for Machinery, Sinowon
Innovation Metrology Manufacture Limited, Zhengzhou University, NEXTEV CO.,
LTD., China Machinery Research Institute of Standards and Technology (Beijing) Co.,
Ltd.
Geometrical product specifications (GPS) - Wedges -
Part 1: Series of angles and slopes
1 Scope
This document specifies terms and definitions for wedges, three series of wedge angles
(120° ~ 0° 30') and a series of wedge slopes (1:10 ~ 1:500).
This document applies to general mechanical engineering purposes.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
wedge
Pair of intersecting planes.
Note 1: A wedge is a feature of size defined by an angular size.
Note 2: See Figure 1.
3.2
wedge angle
Angular size of the wedge defined in a plane perpendicular to the wedge edge.
Note: see Figure 1.
3.3
wedge slope
......
Standard ID | GB/T 4096.1-2022 (GB/T4096.1-2022) | Description (Translated English) | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J04 | Classification of International Standard | 17.040.01 | Word Count Estimation | 11,13 | Date of Issue | 2022-10-12 | Date of Implementation | 2022-10-12 | Older Standard (superseded by this standard) | GB/T 4096-2001 | Drafting Organization | Zhejiang University Shandong Industrial Technology Research Institute, Zhejiang University, Chengdu University of Information Engineering, China Machine Productivity Promotion Center Co., Ltd., Dongguan Zhongwang Precision Instrument Co., Ltd., Zhengzhou University, Shanghai Weilai Automobile Co., Ltd., China Machine Research Institute of Standard Technology (Beijing) Co., Ltd. | Administrative Organization | National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC 240) | Proposing organization | National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC 240) | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee | Standard ID | GB/T 4096-2001 (GB/T4096-2001) | Description (Translated English) | Geometrical product specifications (GPS). Series of angles and slopes on prisms | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J04 | Classification of International Standard | 17.040.01 | Word Count Estimation | 9,950 | Date of Issue | 2001-09-15 | Date of Implementation | 2002-04-01 | Older Standard (superseded by this standard) | GB/T 4096-1983 | Adopted Standard | ISO 2538-1998; MOD | Drafting Organization | Mechanical Engineering Research Institute | Administrative Organization | National product size and geometry Technology Standardization Technical Committee Specification | Proposing organization | China Machinery Industry Federation | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China | Summary | This standard specifies: General Purpose prism angle and slope series. Angle range from 120�� ~ 0�� 30 ', gradient series from 1: 10 to 1 | Standard ID | GB/T 4096-1983 (GB/T4096-1983) | Description (Translated English) | Series of angles and slopes on wedges and prisms | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J04 | Classification of International Standard | 17.040.01 | Word Count Estimation | 5,536 | Date of Issue | 1983/12/27 | Date of Implementation | 1985/1/1 | Adopted Standard | ISO 2538-1974, NEQ |
|