Powered by Google www.ChineseStandard.net Database: 189760 (20 Jul 2024)

GB/T 39084-2020 related PDF English

GB/T 39084-2020 (GB/T39084-2020, GBT 39084-2020, GBT39084-2020) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 39084-2020English215 Add to Cart 0-9 seconds. Auto delivery. Green product assessment-Packings for express service GB/T 39084-2020 Valid GBT 39084-2020
Buy with any currencies (Euro, JPY, KRW...): GB/T 39084-2020    Preview this PDF: GB/T 39084-2020



GB/T 39084-2020: PDF in English (GBT 39084-2020)
GB/T 39084-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 03.240
CCS M 83
Green product assessment - Packings for express
service
ISSUED ON: JUNE 21, 2020
IMPLEMENTED ON: OCTOBER 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 6 
4 Product category ... 7 
5 Assessment requirements ... 8 
6 Assessment method ... 15 
References ... 16 
Green product assessment - Packings for express
service
1 Scope
This document specifies the product categories, assessment requirements,
assessment methods in the assessment of green products for packings of
express services.
This document applies to the assessment of green products for packing of
express services, which includes the following items: express envelopes,
packing boxes, electronic waybills, fillers, packing bags, tapes, container bags,
suspended fastening packings, etc., which are produced by paper, plastic, fiber,
and a combination of multiple materials, as well as reusable packings for
express services. This document is also applicable to the assessment of green
products for postal packings of express services.
2 Normative references
The contents of the following documents constitute the indispensable clauses
of this document through normative references in the text. Among them, for
dated reference documents, only the version corresponding to that date is
applicable to this document; for undated reference documents, the latest
version (including all amendments) is applicable to this document.
GB/T 450 Paper and board - Sampling for testing and identification of
machine and cross direction wire side and felt side
GB/T 1040.3 Plastics - Determination of tensile properties - Part 3: Test
conditions for films and sheets
GB/T 10004-2008 Plastic laminated films and pouches for packing - Dry
lamination and extrusion lamination
GB/T 10739 Paper, board and pulps - Standard atmosphere for conditioning
and testing
GB/T 15337 General rules for atomic absorption spectrometric analysis
GB/T 16288 Marking of plastics products
GB/T 35773 Assessment for odor of packing materials and products
GB/T 37866 Green product assessment - Plastic products
GB/T 38608 Method for determination of the volatile organic compounds
(VOCs) content in the ink
GB/T 38727-2020 Biodegradable plastic films and bags for express logistics
transportation and delivery
BB/T 0016 Packing material - Honeycomb fibreboard
YC/T 207 Determination of solvent residuals on papers for cigarette -
Headspace-gas chromatography/mass spectrometry
YZ/T 0148 Express electronic-waybill
YZ/T 0160.2 Postal industry encapsulation tape - Part 2: Biodegradable
adhesive tape
YZ/T 0166 Technical requirements for packing filler of express mail
YZ/T 0167 Express shipping container - Part 2: Container bag
3 Terms and definitions
The terms and definitions as defined in GB/T 16606.1, GB/T 16606.2, GB/T
16606.3, YZ/T 0167, as well as the following terms and definitions apply to this
document.
3.1
Envelope for express service
An envelope-type packing product which is produced by cardboard as the
main raw material, through die-cutting, printing and gluing, for the purposes
of loading with express mail during the delivery process.
[Source: GB/T 16606.1-2018, 3.1]
3.2
Packing box for express service
A box-type packing product which is produced by cardboard as the main raw
material, through die-cutting, creasing, printing, etc., for the purpose of
loading with express during the delivery process.
container bags, which are made of natural and chemical fibers such as
polyester, polyester cotton, cotton-linen as raw materials.
4.2.4 For the packing products for express services which have a combination
of multiple materials, their main structure is composed of two or more materials,
or made of composite materials.
5 Assessment requirements
5.1 Basic requirements
5.1.1 For the emission of pollutants from the manufacturers of packing products
for express services, it shall meet the requirements of relevant environmental
protection laws and regulations; it shall meet the requirements of national and
local pollutant emission standards and total volume control indicators. There
have been neither major safety accidents nor major environmental pollution
incidents in the past three years.
5.1.2 For the manufacturers of packing products for express services, they shall
adopt advanced technologies and techniques encouraged by the state.
However, they shall not use abandoned or prohibited technologies, techniques,
equipment or related substances which are indicated in the release by the state
or relevant authorities.
5.1.3 Manufacturers of packing products for express services shall have a
special place to store solid waste generated during the production process,
thereby avoiding the scattering, loss and leakage; reduce the generation
amount and hazards of solid waste; carry out harmless disposal and resource
utilization of solid waste.
5.1.4 Manufacturers of packing products for express services should, in
according with GB/T 24001-2016, GB/T 23331-2012, GB/T 19001-2016, GB/T
45001-2020, etc. establish and operate environmental management systems,
energy management systems, quality management system, occupational
health and safety management system.
5.1.5 Manufacturers of packing products for express services shall, in
accordance with the requirements of GB 17167, be equipped with energy
measuring instruments. Meanwhile, it shall be equipped with pollutant detection
and online monitoring equipment in accordance with environmental protection
laws, regulations and standards.
5.1.6 For the different types of packing products which are produced by
manufacturers of packing products for express services, they shall meet the
relevant product standard requirements, including but not limited to the
following:
- The envelope shall meet the requirements of GB/T 16606.1;
- The packing box shall meet the requirements of GB/T 16606.2; the
honeycomb cardboard box shall also meet the requirements of BB/T 0016;
- The packing bag shall meet the requirements of GB/T 16606.3;
- The fillers and suspended fastening packing shall meet the requirements of
YZ/T 0166;
- The electronic waybill shall use a bottomless paper-type one-page form,
which meets the relevant requirements in YZ/T 0148;
- The tape shall use biodegradable tape, which meets the requirements of
YZ/T 0160.2;
- The container bags for express services shall meet the requirements of
YZ/T 0167;
- The reusable packing products for express services shall, in addition to
meeting the relevant product standards, also meet the relevant
requirements of GB/T 16716.3-2018.
5.1.7 Packing products for express services shall meet the requirements of
national and local plastic reduction and restriction policies. Meanwhile, on the
premise of satisfying the use functions of product, it shall adopt reduced,
reusable, recyclable designs.
5.2 Assessment index requirements
5.2.1 Paper packing products for express services
The assessment index requirements for envelopes, packing boxes, paper fillers,
electronic waybills are as shown in Table 1. The assessment index
requirements for other paper express packing products shall meet the
requirements of GB/T 35613.
Table 1 -- Assessment index requirements for envelopes, packing boxes,
paper fillers, electronic waybills
......

BASIC DATA
Standard ID GB/T 39084-2020 (GB/T39084-2020)
Description (Translated English) Green product assessment-Packings for express service
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard M83
Classification of International Standard 03.240
Word Count Estimation 14,154
Date of Issue 2020-06-21
Date of Implementation 2020-10-01
Drafting Organization China National Institute of Standardization, Postal Research and Planning Institute, Guangdong Tianyuan Industrial Group Co., Ltd., Guangdong Kingfa Technology Co., Ltd., Shanlian (Changxing) New Materials Co., Ltd., Beijing Technology and Business University, Shandong Institute of Product Quality Inspection, Shenzhen Institute of Metrology and Quality Inspection, Ruihuan Environmental Protection Technology (Shanghai) Co., Ltd., High Quality Standardization Research Institute (Shandong) Co., Ltd., Foshan Green Development Innovation Research Institute
Administrative Organization National Post Industry Standardization Technical Committee (SAC/TC 462), National Green Product Evaluation Standardization Overall Group
Proposing organization State Post Bureau
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration