GB/T 37040-2018 (GB/T37040-2018, GBT 37040-2018, GBT37040-2018) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB/T 37040-2018 | English | 135 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Limit and determination of carcinogenic dyes in dye products
|
GB/T 37040-2018
| Valid |
GBT 37040-2018
|
Buy with any currencies (Euro, JPY, KRW...): GB/T 37040-2018 Preview this PDF: GB/T 37040-2018
GB/T 37040-2018: PDF in English (GBT 37040-2018)
GB/T 37040-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.01;87.060.10
G 55
Limit and determination of carcinogenic dyes in dye
product
ISSUED ON: DECEMBER 28, 2018
IMPLEMENTED ON: NOVEMBER 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Requirements ... 4
4 Principle ... 4
5 Test methods ... 5
6 Minimum detection limit, precision and recovery rate ... 9
7 Test report ... 9
Annex A (normative) Detection wavelength of HPLC-DAD method of
carcinogenic dye and characteristic ion of HPLC-MS method ... 11
Annex B (informative) Schematic diagram of HPLC-DAD method
chromatogram of standard working solution at different detection wavelengths
... 12
Limit and determination of carcinogenic dyes in dye
product
WARNING - The personnel using this Standard shall have practical
experience in formal laboratory work. This Standard does not point out all
possible safety issues. The user is responsible for taking appropriate
safety and health measures and ensuring compliance with the conditions
stipulated by relevant national laws and regulations.
1 Scope
This Standard specifies limits and determination methods of 12 carcinogenic
dyes (see Annex A) in dye product.
This Standard is applicable to various formulations of dye products.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 6682-2008, Water for analytical laboratory use - Specification and test
methods (ISO 3696:1987, MOD)
GB/T 8170-2008, Rules of rounding off for numerical values & expression
and judgement of limiting values
3 Requirements
The content of each carcinogenic dye (see Annex A) in the dye product shall
not exceed 150mg/kg.
4 Principle
After the sample is dissolved (or extracted), use high performance liquid
chromatography-diode array detector (HPLC-DAD) to determine the nature;
use peak area external standard method to quantify carcinogenic dyes. For
Prepare the single-component carcinogenic dye standard stock methanol
solution listed in Annex A of which the effective concentration is 200mg/L. Store
it in the freezer of a refrigerator from light. It shall be valid for 1 year.
5.4.2 Standard working solution
Group A: Take 0.5mL from the basic violet 14 standard stock solution and place
it in a 50mL volumetric flask. Use methanol to dilute and set it to a constant
volume.
Group B: Respectively take 0.5mL from the remaining 11 standard stock
solutions and place them in 50mL volumetric flasks.
Standard working solution can be prepared into other suitable concentrations
as required. Prepare when required.
5.5 Preparation of sample solution
Methanol soluble dye: Weigh 0.5g of sample (to the nearest of 0.0001g). Place
it in a 50mL volumetric flask. Use methanol to dissolve. Dilute and set it to a
constant volume. Vibrate in an ultrasonic generator. Fully dissolve and make it
ready for use.
Methanol insoluble dye: Weigh 0.5g of sample (to the nearest of 0.0001g).
Place it in a 100mL conical flask with grinding mouth stopper. Accurately add
50mL of methanol. In an ultrasonic generator, conduct 30min extraction. Cool
to room temperature. Use 0.45μm PTFE membrane filter head to filter the
extract for use.
5.6 Spectrum analysis
5.6.1 HPLC-DAD analysis method
5.6.1.1 HPLC-DAD chromatographic conditions
5.6.1.1.1 Since the test results depend on the instrument used, it is impossible
to give general parameters for chromatographic analysis. The following
parameters have been proved to be suitable for testing. It may, according to
different instruments and equipment, select the best analysis conditions.
5.6.1.1.2 Chromatographic column: Stainless steel column of which the length
is 150mm, the inner diameter is 3.9mm, the stationary phase is RP18, the
particle size is 5μm.
5.6.1.1.3 Detection wavelength: 200nm~700nm.
5.6.1.1.4 Quantitative wavelength: 400nm, 500nm, 540nm, 590nm, 620nm.
Turn on the liquid chromatography-mass spectrometer. After the various
operating conditions of the instrument are stable, use a micro syringe to pipette
20μL of sample solution and standard working solutions A, B to respectively
inject into injection valves. After the last component flows out (see Annex B),
use chromatography workstation to process the result. Through characteristic
ion and comparation on the retention time of the chromatographic peak of the
sample and the standard sample, determine the nature.
5.7 Chromatogram
Refer to Annex B for the liquid chromatogram of carcinogenic dyes determined
by this method.
6 Minimum detection limit, precision and recovery rate
6.1 Minimum detection limit
The minimum detection limit of each carcinogenic dye in this method is 10mg/kg.
6.2 Precision
In the same laboratory, the same operator uses the same equipment according
to the same test method. Within a short time, independently test the same
testing object. The absolute difference between the two independent test results
obtained is not more than 10% of its arithmetic mean.
6.3 Recovery rate
Use standard addition method. Add 1mL of the standard stock solution to the
sample that has been determined by this method not contain carcinogenic dyes.
Operate according to Clause 5. The measured recovery rate of carcinogenic
dyes shall be 70%~130%.
7 Test report
The test report shall at least give the following information:
a) Sample description;
b) Standard reference number used;
c) Test result;
d) Deviation from standard;
......
| Standard ID | GB/T 37040-2018 (GB/T37040-2018) | | Description (Translated English) | Limit and determination of carcinogenic dyes in dye products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G55 | | Classification of International Standard | 71.100.01;87.060.10 | | Word Count Estimation | 10,170 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-11-01 | | Drafting Organization | Shenyang Chemical Research Institute Co., Ltd., Zhejiang Boao Dyestuff Industry Co., Ltd., Jinhua Shuanghong Chemical Co., Ltd., Jinhua Henglikang Chemical Co., Ltd., China Chemical Industry Economic and Technological Development Center, National Dyestuff Quality Supervision and Inspection Center | | Administrative Organization | National Dye Standardization Technical Committee | | Proposing organization | China Petroleum and Chemical Industry Federation |
|