GB/T 33584.3-2017 (GB/T33584.3-2017, GBT 33584.3-2017, GBT33584.3-2017) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB/T 33584.3-2017 | English | 90 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Seawater quality requirements and analysis methods for seawater cooling system -- Part 3: Determination of chloride
|
GB/T 33584.3-2017
| Valid |
GBT 33584.3-2017
|
Buy with any currencies (Euro, JPY, KRW...): GB/T 33584.3-2017 Preview this PDF: GB/T 33584.3-2017
GB/T 33584.3-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 17.060; 13.060
Z 17
Seawater Quality Requirements and
Analysis Methods for Seawater Cooling
System – Part 3. Determination of Chloride
ISSUED ON. MAY 12, 2017
IMPLEMENTED ON. DECEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Water Quality Requirements ... 5
4 Principle ... 5
5 Reagents and Materials ... 5
6 Apparatus ... 6
7 Analytical Procedures ... 6
8 Result Calculation ... 7
9 Precision ... 8
Foreword
GB/T 33584 Seawater Quality Requirements and Analysis Methods for Seawater
Cooling System can be divided into the following 6 parts.
--- Part 1. Determination of Calcium and Magnesium;
--- Part 2. Determination of Zinc;
--- Part 3. Determination of Chloride;
--- Part 4. Determination of Sulfate;
--- Part 5. Determination of Dissolved Solids;
--- Part 6. Determination of Heterotrophic Bacteria.
This Part belongs to Part 3 of GB/T 33584.
This Part was drafted as per the rules specified in GB/T 1.1-2009.
This Part was proposed by State Oceanic Administration.
This Part shall be under the jurisdiction of National Technical Committee for
Standardization of Ocean (SAC/TC 283).
Drafting organizations of this Part. State Oceanic Administration Tianjin Institute Sea
Water Desalination and Multipurpose Utilization, Zhejiang Guohua Zheneng Power
Generation Co., Ltd., and Tianjin Tanggu Zhonghai Anti-Corrosion Technology
Development Company.
Chief drafting staffs of this Part. Cheng Guochen, Ye Yunyun, Wu Yunfang, Yin Jianhua,
Jia Chunlian, Xu Na, Liu Yu, Zhang Yi, and Luo Shaohui.
Seawater Quality Requirements and
Analysis Methods for Seawater Cooling
System – Part 3. Determination of Chloride
Warning – Personnel using this Standard shall have practical working
experience in the formal laboratory. This Standard doesn’t indicate all possible
safety issues. The users shall be responsible to take appropriate safety and
health measures, and ensure to satisfy the conditions specified in relevant
national regulations.
1 Scope
This Part of GB/T 33584 specifies the seawater cooling water quality requirements and
the method of adopting silver nitrate volumetric method to determine the chloride in
the seawater cooling water.
This Part is applicable to the determination of chloride content in the seawater cooling
water at 10 000mg/L ~42 000mg/L.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 6682 Water for Analytical Laboratory Use – Specification and Test Methods
GB/T 12804 Laboratory Glassware – Graduated Measuring Cylinders
GB/T 12805 Laboratory Glassware – Burettes
GB/T 12806 Laboratory Glassware – One-Mark Volumetric Flasks
GB/T 12807 Laboratory Glassware – Graduated Pipettes
GB/T 12808 Laboratory Glassware – One-Mark Pipettes
......
| Standard ID | GB/T 33584.3-2017 (GB/T33584.3-2017) | | Description (Translated English) | Seawater quality requirements and analysis methods for seawater cooling system -- Part 3: Determination of chloride | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Z17 | | Classification of International Standard | 07.060; 13.060 | | Word Count Estimation | 5,554 | | Date of Issue | 2017-05-12 | | Date of Implementation | 2017-12-01 | | Quoted Standard | GB/T 6682; GB/T 12804; GB/T 12805; GB/T 12806; GB/T 12807; GB/T 12808 | | Drafting Organization | State Oceanic Administration Tianjin Seawater Desalination and Comprehensive Utilization Research Institute, Zhejiang Guohua Zhejiang Power Generation Co., Ltd., Tianjin Tanggu Zhonghai Anticorrosive Technology Development Company | | Administrative Organization | National Marine Standardization Technical Committee (SAC/TC 283) | | Proposing organization | State Oceanic Administration | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the water quality requirements for seawater cooling and the determination of chlorides in seawater cooling water by silver nitrate volumetric method. This standard is applicable to the determination of chloride content in seawater cooling water at 10 000 mg/L to 42 000 mg/L. |
|