|
US$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32352-2015: Standard of acceptance for wind turbine generator systems used on plateau
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32352-2015 | English | 419 |
Add to Cart
|
4 days [Need to translate]
|
Standard of acceptance for wind turbine generator systems used on plateau
| Valid |
GB/T 32352-2015
|
PDF similar to GB/T 32352-2015
Basic data | Standard ID | GB/T 32352-2015 (GB/T32352-2015) | | Description (Translated English) | Standard of acceptance for wind turbine generator systems used on plateau | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K04 | | Classification of International Standard | 29.02 | | Word Count Estimation | 20,257 | | Date of Issue | 2015-12-31 | | Date of Implementation | 2016-07-01 | | Regulation (derived from) | State Standard Announcement 2015 No.43 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32352-2015: Standard of acceptance for wind turbine generator systems used on plateau---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard of acceptance for wind turbine generator systems usd on plateau
ICS 29.020
K04
National Standards of People's Republic of China
Plateau with the wind turbine site acceptance
Issued on. 2015-12-31
2016-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Acceptance Requirements 2 4
5 Acceptance Preparation 2
6 start-up acceptance 3
Acceptance Unit 7 3
8 9 acceptance rectification
9 9 confirm acceptance
Appendix A (informative) Guidance acceptance list tool 10
Annex B (informative) availability assessment methods 12
Annex C (informative) power curve assessment methods 13
Annex D (informative) Units acceptance report 14
References 16
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Electrical Equipment Industrial Association.
This standard by the national electrical products plateau Environmental Technology Standardization Technical Committee (SAC/TC330) centralized.
This standard was drafted. Kunming Electrical Apparatus Research Institute, Xinjiang Goldwind Science & Technology Co., Ltd., Beijing Tianyuan Branch Wind Power Technology Co.,
Ltd., the new speed Yongji Electric Appliance Co., Sinovel Technology (Group) Co., Ltd., Beijing Tiancheng Tongchuang electrical
Ltd., Xiangtan Electric Co., Ltd., Guangdong Mingyang Wind Power Industry Group Co., Ltd, China Power Construction Group Chengdu Survey and Design Research
Institute Limited, CSR Zhuzhou Electric Locomotive Research Institute Co., Ltd. Wind Power Division, Guodian United Power Technology Co., Ltd., Shanghai survey set
Total Research Institute Co., Xuchang XJ Wind Power Technology Co., Ltd., Shenyang, China Wind Energy Ltd, Zhejiang Yunda Wind Power Co., Ltd.,
Yunnan Power Grid Corporation, Yunnan Electric Power Research Institute (Group) Co., Ltd., Yunnan Institute of Mechatronic Technology, Shenzhen Electric Institute of Science, China
Can Eryuan Wind Power Co. Ltd., Sichuan Branch Lu Electric Co., Ltd., Chuxiong Integrated Quality and Technical Supervision and Testing Center, China Standard
Of the Association, Institute of Process Engineering.
The main drafters of this standard. Liu Jian, Ma Po, Zhang Dongning, Zhou Qiongfang, Sun Wei, Gan Xu Chao, Xiesheng Qing, rice Hing Society, Huang Xiaoyun, Zhang Qin,
Yangming Ming, Huang Jianfeng, Guo Tao, Liang Hongxia, GRAPHIC, Zeng Yi, Zhong Tao, Ren Prince Chun, Chen Rongsheng, Chujing Chun, Li Jianying, Wang indigo, Li Xiaoguang,
Cheng Lin Zhi, Yang Yang, Yang Jing, Chen Qi, Shi Xiaoming, LIU Yan-election, Cai Xiaofeng, Chen Yong, Li Yi-Bo, Liang Shibin, Yang Zhihong, Wang Yanhua, Zhao Lei, Qi Rong,
Juan Yang, Ye Lin, Gao Bo, Wu navy, Xiaomin Ying, Cao Lei, Wang Jia, Wu Feng, Chen Siming.
Plateau with the wind turbine site acceptance
1 Scope
This standard specifies a plateau with the wind turbine (hereinafter referred to as "units") and the general content requirements in the field of inspection.
This standard applies to an altitude of 1000m to 5000m above and below the horizontal axis of the production has been established and grid units, other classes
Type units can be performed with reference to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2900.53 Electrotechnical terminology Wind Turbine
GB/T 4942.1 overall structure of the rotary motor protection (IP code) rating
GB/T 20319 wind turbine acceptance
GB /Z25427 wind turbine lightning protection
GB/T 31140 altitude wind power generation equipment with the technical requirements of the environment
DL/T 666 wind farms operating procedures
DL/T 796 wind farm safety rules
3 Terms and Definitions
GB/T 2900.53 define the following terms and definitions apply to this document.
3.1
Commissioning test run
After the installation is completed the unit, before the official full operation, running through a period of testing, the detection unit of overall performance of the process.
In this process, the unit continuous, stable, trouble-free operation some time.
3.2
Quality assurance of warrantyperiod
After commissioning the unit, equipment suppliers take relevant measures to ensure the normal and stable operation of the unit and eliminate the defect responsible for the unit to ensure that
Units meet the design and quality requirements for some time.
3.3
Installation and acceptance acceptanceforinstalation
Unit after installation is complete, the unit is installed and the installation of quality-related inspections.
3.4
Commissioning acceptance acceptanceforcommissioning
Unit fully operational before the official check the work of the unit related equipment and components, and verify whether the design of the plant unit operation
Performance and quality inspection.
3.5
Quality assurance of acceptance acceptanceforwarrantyperiod
Quality assurance unit before the expiration of the warranty period of the unit for maintenance, repair, unit performance and quality inspection.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32352-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32352-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32352-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32352-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|