GB/T 32322.1-2015 (GB/T32322.1-2015, GBT 32322.1-2015, GBT32322.1-2015) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB/T 32322.1-2015 | English | 150 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Rolling bearings -- Profiled rail guides for linear motion rolling bearings -- Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
|
GB/T 32322.1-2015
| Valid |
GBT 32322.1-2015
|
Buy with any currencies (Euro, JPY, KRW...): GB/T 32322.1-2015 Preview this PDF: GB/T 32322.1-2015
GB/T 32322.1-2015: PDF in English (GBT 32322.1-2015)
GB/T 32322.1-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 21.100.20
J 11
GB/T 32322.1-2015 / ISO 12090-1.2011
Rolling bearings - Profiled rail guides for linear motion
rolling bearings - Part 1. Boundary dimensions and
tolerances for series 1, 2 and 3
滚动轴承 直线运动滚动支承成型导轨副
(ISO 12090-1.2011, IDT)
ISSUED ON. DECEMBER 31, 2015
IMPLEMENTED ON. APRIL 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Symbols... 9
5 Design types ... 10
6 Boundary dimensions... 11
7 Tolerances ... 18
Annex A (informative) General length tolerances for profiled rails ... 20
Foreword
GB/T 32322 “Rolling bearings - Profiled rail guides for linear motion rolling bearings”
consists of 2 parts.
‐ Part 1. Boundary dimensions and tolerances for series 1, 2 and 3;
‐ Part 2. Boundary dimensions and tolerances for series 4 and 5.
This Part is Part 1 of GB/T 32322.
This Part is drafted in accordance with the rules given in GB/T 1.1-2009.
This Part uses translation method to identically adopt ISO 12090-1.2011 “Rolling
bearings - Profiled rail guides for linear motion rolling bearings - Part 1. Boundary
dimensions and tolerances for series 1, 2 and 3”.
China’s documents that are identical to the international documents normatively
referenced in this Part are as follows.
- GB/T 4199-2003 Rolling bearings - Tolerances - Part 1. Terms and definitions (ISO
1132-1, MOD)
- GB/T 6930-2001 Rolling bearings - Vocabulary (ISO 5593.1997, IDT)
- GB/T 7811-2015 Rolling bearings - Symbols for quantities (ISO 15241.2012, IDT)
- GB/T 29719-2013 Rolling bearings - Linear motion rolling bearings - Vocabulary
(ISO 24393.2008, IDT)
This Part is proposed by China Machinery Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee on Rolling
Bearing of Standardization Administration of China (SAC/TC 98).
Drafting organizations of this Part. Luoyang Bearing Research Institute Co., Ltd.,
Zhejiang Jingjiu Bearing Co., Ltd., Shandong Camry Bearing Technology Co., Ltd.,
Zhongshan PCC Bearing Manufacturing Co., Ltd., Luoyang Zhouke Science and
Technology Co., Ltd.
Main drafters of this Part. Ma Suqing, Yao Yongwei, Yan Jingxiang, Zhang Shiyu, Liu
Jing and Li Song.
Rolling bearings - Profiled rail guides for linear motion
rolling bearings - Part 1. Boundary dimensions and
tolerances for series 1, 2 and 3
1 Scope
This Part of GB/T 32322 establishes the boundary dimensions and tolerances for
series 1, 2 and 3 of linear motion rolling bearings, profiled rail guides.
These bearings consist of profiled rails with carriages, which can support forces from
all perpendicular directions and moments around all axes and consist of recirculating
rolling elements. The internal design of these profiled rail guides is at the discretion of
the manufacturer.
An assembly, as specified by the manufacturer, can comprise one or more carriages
on a profiled rail. Therefore, the interchange or combination of these elements can only
be carried out within the limits permitted by the manufacturer.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 1132-1 Rolling bearings - Tolerances - Part 1. Terms and definitions
ISO 5593 Rolling bearings - Vocabulary
ISO 15241 Rolling bearings - Symbols for quantities
ISO 24393 Rolling bearings - Linear motion rolling bearings - Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1132-1, ISO
5593, ISO 24393 and the following apply.
3.1
......
| Standard ID | GB/T 32322.1-2015 (GB/T32322.1-2015) | | Description (Translated English) | Rolling bearings -- Profiled rail guides for linear motion rolling bearings -- Part 1: Boundary dimensions and tolerances for series 1, 2 and 3 | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.20 | | Word Count Estimation | 19,139 | | Date of Issue | 2015-12-31 | | Date of Implementation | 2016-04-01 | | Drafting Organization | Luoyang Bearing Research Institute Co., Ltd; Zhejiang Jingjiu Bearing Co., Ltd.; Shandong Camry Bearing Co., Ltd.; Zhongshan City, Pacific Century Bearing Manufacturing Co., Ltd; Luoyang Bearing Science & Technology Co., Ltd. | | Administrative Organization | Rolling the National Standardization Technical Committee (SAC/TC 98) | | Regulation (derived from) | State Standard Announcement 2015 No.43 | | Proposing organization | China Machinery Industry Federation | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China |
|