|
US$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30413-2013: Performance requirements for recessed LED luminaires
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30413-2013 | English | 669 |
Add to Cart
|
5 days [Need to translate]
|
Performance requirements for recessed LED luminaires
| Valid |
GB/T 30413-2013
|
PDF similar to GB/T 30413-2013
Basic data | Standard ID | GB/T 30413-2013 (GB/T30413-2013) | | Description (Translated English) | Performance requirements for recessed LED luminaires | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K72 | | Classification of International Standard | 29.140.40 | | Word Count Estimation | 29,257 | | Quoted Standard | GB/T 2423.1-2008; GB 7000.1; GB/T 9468-2008; GB 19510.14-2009; GB 24819-2009; GB/T 24824-2009; GB/T 24825-2009; EN 12464-1-2011 | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the LED light source, power supply voltage not exceeding 250V indoor general lighting embedded luminaries (hereinafter referred to as lamps) performance requirements. This standard applies to the use of integrated LED module, semi- | GB/T 30413-2013: Performance requirements for recessed LED luminaires---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Performance requirements for recessed LED luminaires
ICS 29.140.40
K72
National Standards of People's Republic of China
Recessed LED luminaire performance requirements
Issued on. 2013-12-31
2014-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Category 4
4.1 Use according to the type of LED light source category 5
4.2 Classification by flux 5
4.3 Classification by dimensions 5
General requirements 5 5
6 5 General test requirements
6.1 5 Series or unit
6.2 Sample Number 5
6.3 Part 5
Technical Requirements 6 7
6 7.1 Electrical Properties
7.2 photometric performance 6
7.3 8 glare control
7.4 chroma 8
7.5 Structural requirements 9
7.6 Thermal Test 10
10 7.7 Reliability
7.8 low temperature suitability 10
8 10 Test Method
10 8.1 General Requirements
11 8.2 Electrical Properties
8.3 photometric performance 11
8.4 glare control 12
8.5 Chroma 13
8.6 Structure 16
8.7 Thermal Test 16
16 8.8 Reliability
8.9 Suitability temperature 16
9 mark 16
9.1 mark on the lamp 16
17 9.2 Additional Content
Types Appendix A (Informative Appendix) LED lamp 18
C- photometric plane coordinate system Annex B (normative) lamps 19
Annex C (informative) indoor lighting distance higher than 20
Appendix D (Informative Appendix) VDT application environment with brightness limit 21
Appendix E (normative) measuring equipment 22
References 24
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee Lighting fixtures Technical Committee (SAC/TC224SC2) centralized.
This standard was drafted. National Lighting Fitting Quality Supervision and Inspection Center, Shanghai Light era Lighting Appliance Co., detection, Philips Lamps
(Shanghai) Co., Ltd., Guangdong Product Quality Supervision and Inspection Institute, Shanghai Yaming Lighting Co., Ltd., Zhongshan City, Guangdong Province, measuring the quality of supervision
Governor detecting, China Quality Certification Center sub-centers in Nanjing, Beijing Matsushita Electric Co., Ltd., Dongguan, Guangdong Province Quality Supervision and Inspection Center, Hui
State NVC Lighting Technology Co., Ltd., Huizhou City Industrial Development Co., Ltd. Sidon.
The main drafters of this standard. Yang Yue, Shi Xiaohong, Chen Chao, the Li Jun, Sang Gao Yuan, Lu Wei Chen, Zheng Yan, Peng Zhenjian, Chu Jianping, Zhu Hongbin,
Lee Liang, Xiong Fei, Tan Guoqiang.
Recessed LED luminaire performance requirements
1 Scope
This standard specifies the LED light source, the power supply voltage not exceeding 250V indoor general lighting with recessed light fixtures (hereinafter referred to as lamp
A) performance requirements.
This standard applies to the use of integrated LED module, LED module semi-integrated, non-integrated LED module, semi-integrated LED lights
Integrated LED lamp or lamps.
This standard does not apply to integrated LED light fixtures.
This standard does not apply to embedded LED downlight.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-1.
2007, IDT)
GB 7000.1 lamps - Part 1. General requirements and tests (GB 7000.1-2007, IEC 60598-1.2003, IDT)
General requirements GB/T 9468-2008 luminaire photometric distribution
Part 14 control unit GB 19510.14-2009 Lamp. LED module for a special or AC supplied electronic control device
Seek (IEC 61347-2-13.2006, IDT)
GB 24819-2009 LED modules for general lighting - Safety requirements (IEC 62031.2008, IDT)
GB/T 24824-2009 LED modules for general lighting test methods
GB/T 24825-2009 LED module or AC supplied electronic control devices - Performance requirements (IEC 62384.2006, MOD)
EN12464-1.2011 light lighting workplace lighting - Part 1. Indoor workplaces
3 Terms and definitions
GB 7000.1, GB 19510.14, GB 24819 and GB/T 24825 and defined by the following terms and definitions apply to this document.
3.1
LED lamps LEDluminaire
Designed to use LED light fixtures.
Note. See the definition of lamps GB 7000.1 1.2.1.
3.2
Integral LED lamps integralLEDluminaire
Interior contains all the additional elements LED light source and a light source and start the work must be stable, unless permanent damage can not be dismantled
Lamps.
Note 1. The use of LED light fixtures, LED lights usually can be removed and replaced, not part of the integral LED lamps.
Note 2. The integral LED lamps including LED light source and LED control unit can not be disassembled lamps, LED lamps light source can not be removed and the LED module
Control device can not be disassembled lamps.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30413-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30413-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30413-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30413-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|