GB/T 27691-2017 (GB/T27691-2017, GBT 27691-2017, GBT27691-2017) & related versions
Buy with any currencies (Euro, JPY, KRW...): GB/T 27691-2017 Preview this PDF: GB/T 27691-2017
GB/T 27691-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.60
H 44
Replacing GB/T 27691-2011
Wire Rod for Steel Cord
ISSUED ON. MAY 31, 2017
IMPLEMENTED ON. FEBRUARY 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Application Scope ... 4
2 Normative References ... 4
3 Designation System and Symbols ... 6
4 Ordering Content ... 6
5 Dimensions, Shape, Weight and Tolerances ... 7
6 Specifications ... 7
7 Test Methods ... 10
8 Inspection Rules ... 11
9 Rounding off of numerical values ... 11
10 Packaging, Marking and Quality Certification ... 12
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 27691-2011, Wire Rod for Steel Cord.
Compared with GB/T 27691-2011, the major changes of this Standard are as follows.
-- it is confirmed that the nominal diameter of wire rod shall not be greater than 6.5
mm;
-- the designations of LX85B, LX90B and relevant specifications are added;
-- the requirements for the content of chemical component Mn of the designations
of LX70A, LX80A are modified;
-- the allowable grade of network cementite is confirmed;
-- strict control shall be exercised on centre segregation in accordance with grades
A and B;
-- the requirements for the maximum widths of longitudinal inclusions and the
maximum dimensions of lateral inclusions are modified;
-- the provisions on the surface scale of wire rod are changed into as-agreed
clauses.
This Standard was proposed by China Iron and Steel Association.
This Standard shall be under the jurisdiction of the National Standardization Technical
Committee on Steels (SAC/TC 183).
The drafting organizations of this Standard. Angang Steel Co., Ltd., Zenith Steel Group
Co., Ltd., Jiangsu Yonggang Group Co., Ltd., Qingdao Special Steel Co., Ltd., China
Metallurgical Information and Standardization Institute.
The main drafters of this Standard. Zhai Liping, Han Litao, Guo Dayong, Ren Cuiying,
Wang Lingjun, Huang Yongsheng, Liu Cheng, Wu Jinyuan, Hu Haiping, Wang Miao,
Liu He.
The previous edition of the standard replaced by this Standard is as follows.
-- GB/T 27691-2011.
Wire Rod for Steel Cord
1 Application Scope
This Standard specifies the designation system and symbols, ordering content, and
dimensions, shape, weight and tolerances, specifications, test methods, inspection
rules and packaging, marking and quality certification of wire rod for steel cord.
This Standard applies to wire rod for steel cord of nominal diameter not greater than
6.5 mm (hereinafter referred to as “wire rod”).
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
GB/T 222, Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.5, Steel and iron – Determination of Acid-Soluble Silicon and Total
Silicon Content – Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.12, Methods for Chemical Analysis of Iron, Steel and Alloy – The Sodium
Carbonate Separation-Diphenyl Carbazide Photometric Method for the
Determination of Chromium Content
GB/T 223.19, Methods for Chemical Analysis of Iron Steel and Alloy – The
Neocuproine-Chloroform Extraction Photometric Method for the Determination of
Copper Content
GB/T 223.23, Iron, Steel and Alloy – Determination of Nickel Content – The
Dimethylglyoxime Spectrophotometric Method
GB/T 223.31, Iron Steel and Alloy – Determination of Arsenic Content – Distillation-
Molybdenum Blue Spectrophotometric Method
GB/T 223.37, Methods for Chemical Analysis of Iron, Steel and Alloy – The
Indophenol Blue Photometric Method for the Determination of Nitrogen Content
after Distillation Separation
GB/T 223.50, Methods for Chemical Analysis of Iron, Steel and Alloy – The
Phenylfuorone-CTMAB Direct Photometric Method for The Determination of Tin
Content
GB/T 223.62, Methods for Chemical Analysis of Iron, Steel and Alloy – the Butyl
Acetate Extraction Photometric Method for the Determination of Phosphorus
Content
GB/T 223.63, Methods for Chemical Analysis of Iron, Steel and Alloy – The Sodium
(Potassium) Periodate Photometric Method for the Determination of Manganese
Content
GB/T 223.69, Iron, Steel and Alloy – Determination of Carbon Contents – Gas-
volumetric Method after Combustion in the Pipe Furnace
GB/T 223.72, Iron, Steel and Alloy – Determination of Sulfur Content – Gravimetric
Method
GB/T 223.81, Iron Steel and Alloy – Determination of Total Aluminum and Total
Boron Contents – Microwave Digestion-Inductively Coupled Plasma Mass
Spectrometric Method
GB/T 224, Determination of Depth of Decarburization of Steels
GB/T 228.1, Metallic Materials – Tensile Testing – Part 1. Method of Test at Room
Temperature
GB/T 2101, General Requirement of Acceptance, Packaging, Marking and
Certification for Section Steel
GB/T 2975, Steel and Steel Products – Location and Preparation of Test Pieces for
Mechanical Testing
GB/T 4336, Carbon and Low-alloy Steel – Determination of Multi-element Contents
– Spark Discharge Atomic Emission Spectrometric Method (Routine Method)
GB/T 6394, Metal – Methods for Estimating the Average Grain Size
GB/T 8170, Rules of Rounding off for Numerical Values and Expression and
Judgement of Limiting Values
GB/T 10561, Steel – Determination of Content of Nonmetallic Inclusions –
Micrographic Method Using Standards Diagrams
GB/T 13298, Inspection Methods of Microstructure for Metals
GB/T 14981-2009, Dimension, shape, mass and tolerance for hot-rolled round wire
rod
GB/T 17505, Steel and Steel Products – General Technical Delivery Requirements
GB/T 20066, Steel and Iron – Sampling and Preparation of Samples for the
Determination of Chemical Composition
5 Dimensions, Shape, Weight and Tolerances
5.1 The dimensions, shape and tolerances of wire rod shall be as specified for
accuracy grade B or grade C of GB/T 14981-2009. When they are not specified, wire
rod shall be delivered as specified for accuracy grade B.
5.2 The weight of wire rod shall be as specified in GB/T 14981-2009.
6 Specifications
6.1 Designations and chemical compositions
6.1.1 The designations and chemical compositions (by ladle analysis) of steel for wire
rod shall be as specified in Table 1.
6.1.2 When the purchaser requires the analysis of chemical compositions of finished
products, the tolerances from the chemical compositions specified in Table 1 shall be
as specified in GB/T 222.
6.1.3 Without the consent of the purchaser, the chemical elements not listed in Table
1 shall not be added in steel.
6.1.4 Wire rod of other designations and chemical compositions may be supplied,
which shall be as agreed on by the supplier and the purchaser and stated in the
contract.
6.2 Smelting method
Steel shall be smelted in a converter or electric furnace and then refined outside of the
furnace.
6.3 Delivery condition
Wire rod is delivered in the condition of hot rolling and controlled cooling. Each coil
consists of one pc of wire rod; wire rod shall be marked on both ends.
......
GB/T 27691-2011
Wire rod for steel cord
ICS 77.140.60
H44
National Standards of People's Republic of China
Cord wire rod
Issued on. 2011-12-30
2012-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Iron and Steel Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee.
This standard was drafted. Angang Steel Company Limited, Metallurgical Industry Information Standards Institute, Wuhan Iron and Steel Group Corporation, Jiangsu Shagang Group
Ltd., Qingdao Iron and Steel Co., Ltd., Shougang Corporation, Xingtai Iron and Steel Co., Ltd. on Haiaishengma metal material.
The main drafters of this standard. Liu Xu Yuan, Pu Zhimin, Renyu Hui, Wang Lingjun, Daishi Feng, Lvxue Bin, Chen Shaohui, Zhengshi Fen, Tang, animal husbandry,
Wang Xiaodan, Qian Zhu Chang, Jiang Yuedong.
Cord wire rod
1 Scope
This standard specifies the steel cord wire rod grades, ordering the content, size, shape, weight and deviation, technical requirements, test methods allow,
Inspection rules, packaging, marking and quality certification.
This standard applies to the manufacture of steel cord wire rod.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document
GB/T 222 chemical composition of finished steel tolerance
Spectrophotometric determination of GB/T 223.5 steel and alloy chemical analysis method further prototype silicon molybdate soluble silicon content
GB/T 223.9 steel and aluminum alloys - Determination of chromium content Azure S Spectrophotometry
GB/T 223.12 Methods for chemical analysis of iron, steel and alloys of sodium carbonate separation - diphenyl hydrazine spectrophotometric determination of chromium content
GB/T 223.19 Methods for chemical analysis of iron, steel and alloy neocuproine - chloroform extraction spectrophotometric determination of copper content
GB/T 223.23 steel and alloy - Determination of nickel content dimethylglyoxime spectrophotometry
GB/T 223.31 Methods for chemical analysis of iron, steel and alloy distillation - spectrophotometric determination of arsenic content - Molybdenum blue spectrophotometric
GB/T 223.37 Methods for chemical analysis of iron, steel and alloy distillation - indophenol blue photometric method for the determination of nitrogen
GB/T 223.47 Methods for chemical analysis of iron, steel and alloy carrier precipitation - molybdenum blue spectrophotometric determination of antimony content
GB/T 223.51 Methods for chemical analysis of iron, steel and alloy 5-Br-PADAP spectrophotometric determination of zinc content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy butyl acetate extraction spectrophotometric determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy The sodium (potassium) for Determination of amount
GB/T 223.67 steel and alloy sulfur content - Methylene blue spectrophotometric method
GB/T 223.69 after carbon and alloy steel - Determination of the pipe furnace combustion gas volumetric method
GB/T 224 Determination of depth of decarburization of steel method (GB/T 224-1987, eqv ISO 3887. 1976)
GB/T 228 metal materials at room temperature tensile test method (GB/T 228-2002, eqv ISO 6892.1998)
General provisions GB/T 2101 steel acceptance, packaging, marking and quality certificate
GB/T 2975 Steel and steel products for mechanical testing location and sample preparation (GB/T 2975-1998, eqv ISO 377.
1997)
GB/T 4336 carbon steel and low alloy steel spark source atomic emission spectrometry method (conventional method)
GB/T 6394 Determination of average grain size of metal
GB/T 10561 Steel - Determination of content of nonmetallic inclusions --- Micrographic method using standards diagrams (GB/T 10561-2005,
ISO 4967.1998, IDT)
GB/T 13298 metal microstructure inspection method
Microstructure GB/T 13299 Evaluation Method of Steel
GB/T 14981-2009 hot rods size, shape, weight and tolerances (GB/T 14981-2009, ISO 16124.
......
Standard ID | GB/T 27691-2017 (GB/T27691-2017) | Description (Translated English) | Wire rod for steel cord | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | H44 | Classification of International Standard | 77.140.60 | Word Count Estimation | 8,829 | Date of Issue | 2017-05-31 | Date of Implementation | 2018-02-01 | Older Standard (superseded by this standard) | GB/T 27691-2011 | Quoted Standard | GB/T 222; GB/T 223.5; GB/T 223.12; GB/T 223.19; GB/T 223.23; GB/T 223.31; GB/T 223.37; GB/T 223.50; GB/T 223.62; GB/T 223.63; GB/T 223.69; GB/T 223.72; GB/T 223.81; GB/T 224; GB/T 228.1; GB/T 2101; GB/T 2975; GB/T 4336; GB/T 6394; GB/T 8170; GB/T 10561 | Drafting Organization | Anshan Iron and Steel Co., Ltd., Zhongtian Iron and Steel Group Co., Ltd., Jiangsu Yonggang Group Co., Ltd., Qingdao Special Steel Co., Ltd., Metallurgical Industry Information Standards Institute | Administrative Organization | National Steel Standardization Technical Committee (SAC/TC 183) | Proposing organization | China Iron and Steel Industry Association | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | Summary | This standard specifies the method and symbol, order, size, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of the steel cord. This standard applies to wire rods with a nominal diameter of not more than 6.5 mm (hereinafter referred to as "wire rod"). | Standard ID | GB/T 27691-2011 (GB/T27691-2011) | Description (Translated English) | Wire rod for steel cord | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | H44 | Classification of International Standard | 77.140.60 | Word Count Estimation | 9,934 | Date of Issue | 2011-12-30 | Date of Implementation | 2012-10-01 | Quoted Standard | GB/T 222; GB/T 223.5; GB/T 223.9; GB/T 223.12; GB/T 223.23; GB/T 223.31; GB/T 223.37; GB/T 223.47; GB/T 223.51; GB/T 223.62; GB/T 223.63; GB/T 223.67; GB/T 223.69; GB/T 224; GB/T 228; GB/T 2101; GB/T 2975; GB/T 4336; GB/T 6394; GB/T 10561; GB/T 13298; GB/T 13299; GB/T 14981-2009; GB/T 17505; GB/T 20066; GB/T 24242.1-2009; YB/T 081; YB/T 169; GB/T 223.19 | Drafting Organization | Angang Steel Company Limited | Administrative Organization | National Steel Standardization Technical Committee | Regulation (derived from) | Announcement of Newly Approved National Standards No. 22 of 2011 | Proposing organization | China Iron and Steel Association | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | Summary | This standard specifies the grades of steel cord wire rod, ordering the contents, size, shape, weight and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certification. This standard applies to the manufacture of steel cord wire rod. |
|