GB/T 26055-2022 (GB/T26055-2022, GBT 26055-2022, GBT26055-2022) & related versions
Buy with any currencies (Euro, JPY, KRW...): GB/T 26055-2022 Preview this PDF: GB/T 26055-2022
GB/T 26055-2022: PDF in English (GBT 26055-2022)
GB/T 26055-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.160
CCS H 71
Replace GB/T 26055-2010
Reproduced tungsten carbide powder
再生碳化钨粉
ISSUED ON: JULY 11, 2022
IMPLEMENTED ON: FEBRUARY 1, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Categories ... 5
5 Technical requirements ... 5
6 Test methods ... 6
7 Inspection rules ... 6
8 Marking, packaging, transportation, storage, and accompanying documents ... 7
9 Order form contents ... 9
Reproduced tungsten carbide powder
1 Scope
This document specifies the classification, technical requirements, test methods,
inspection rules, marking, packaging, transportation, storage, accompanying
documents, and order form contents of reproduced tungsten carbide powder.
This document is applicable to reproduced tungsten carbide powder produced by the
electrolytic process and using recycled cemented carbide as raw material.
2 Normative references
The following documents contain the provisions which, through normative reference in
this document, constitute the essential provisions of this document. For the dated
referenced documents, only the versions with the indicated dates are applicable to this
document; for the undated referenced documents, only the latest version (including all
the amendments) is applicable to this document.
GB/T 1480 Metallic powders - Determination of particle size by dry sieving
GB/T 3249 Test method for Fisher number of metal powders and related compounds
GB/T 4324.12 Methods for chemical analysis of tungsten - Part 12: Determination
of silicon content - Chlorization-molybdenum blue spectrophotometry
GB/T 4324.25 Methods for chemical analysis of tungsten - Part 25: Determination
of oxygen content - Pulse heating inert gas fusion-infrared absorption method
GB/T 5124.1 Methods for chemical analysis of hardmetals - Determination of total
carbon content - Gravimetric method
GB/T 5124.2 Methods for chemical analysis of hardmetals - Determination of
insoluble (free) carbon content - Gravimetric method
GB/T 5314 Powders for powder metallurgical purposes - Sampling
GB/T 26050 Hardmetals - Determination of contents of metallic elements by X-ray
fluorescence - Fusion method
5.2 Particle size
Reproduced tungsten carbide powder shall be sifted through a sieve with an aperture
size of 150 μm, and the oversize powder shall not exceed 5% (mass fraction). The Fisher
particle size of reproduced tungsten carbide powder shall not be greater than 4.0 μm.
5.3 Appearance quality
The reproduced tungsten carbide powder is gray-black powder, and the particle size and
color of the powder shall be uniform; it shall be dry and have no agglomeration and no
visible impurities.
6 Test methods
6.1 Chemical composition
6.1.1 The determination of the total carbon content of the product shall be carried out
in accordance with the provisions of GB/T 5124.1.
6.1.2 The determination of the free carbon content of the product shall be carried out in
accordance with the provisions of GB/T 5124.2.
6.1.3 The determination of Co, Ni, Fe, and Ti contents of products shall be carried out
according to the provisions of GB/T 26050.
6.1.4 The determination of the Si content of the products shall be carried out according
to the provisions of GB/T 4324.12.
6.1.5 The determination of the O content of the products shall be carried out according
to the provisions of GB/T 4324.25.
6.2 Particle size
The product shall be sifted according to the provisions of GB/T 1480, and the
determination of Fisher particle size shall be carried out according to the provisions of
GB/T 3249.
6.3 Appearance quality
The appearance quality of the product shall be inspected visually.
7 Inspection rules
7.1 Inspection and acceptance
accompanying documents
8.1 Marking
The outer packaging of products that have passed the inspection shall be marked with
the following contents:
a) Supplier name;
b) Product name and grade;
c) Batch number;
d) Net weight.
8.2 Packaging
The product shall be packaged in polyethylene plastic bags, and each bag shall have a
net weight of 50 kg; it shall be placed in a plastic packaging drum or iron drum and
sealed with a cover, or it can be packed according to the requirements of the order form.
8.3 Transportation
The product shall be protected from rain and moisture during transportation, and the
transportation vehicles shall be clean. During the handling process, it shall not be rolled,
put upside down and violently bumped, and the sealed packaging of the product shall
not be damaged.
8.4 Storage
The product shall be stored in a dry, ventilated place with no acid and no alkaline
atmosphere to prevent oxidation; the storage period shall not exceed half a year.
8.5 Accompanying documents
Each batch of products shall be attached with accompanying documents, in addition to
supplier information, product information, the number of this document, date of
manufacture, or date of packaging, the following contents should be included.
a) Product quality certificate, the contents are as follows:
The main performance of the product;
The quality certification obtained by the product, and various analysis and
inspection results approved by the supplier’s technical supervision department.
b) Product instructions include correct handling, use, storage methods, and so on.
......
| Standard ID | GB/T 26055-2022 (GB/T26055-2022) | | Description (Translated English) | Reproduced tungsten carbide powder | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H71 | | Classification of International Standard | 77.160 | | Word Count Estimation | 7,720 | | Date of Issue | 2022-07-11 | | Date of Implementation | 2023-02-01 | | Older Standard (superseded by this standard) | GB/T 26055-2010 | | Drafting Organization | Zigong Great Wall Creed New Material Co., Ltd., Zigong Cemented Carbide Co., Ltd., Hubei Green Tungsten Resource Recycling Co., Ltd., Zhuzhou Cemented Carbide Group Co., Ltd., Nanchang Cemented Carbide Co., Ltd., Penglai Superhard Composite Materials Co., Ltd. company | | Administrative Organization | National Nonferrous Metals Standardization Technical Committee (SAC/TC 243) | | Proposing organization | China Nonferrous Metals Industry Association | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
|