HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (10 Nov 2024)

GB/T 2423.55-2023 Related PDF English (GB/T 2423.55-2006)

GB/T 2423.55-2023 (GB/T2423.55-2023, GBT 2423.55-2023, GBT2423.55-2023) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 2423.55-2023English534 Add to Cart 4 days Environmental testing - Part 2: Test methods - Test Eh: Hammer tests GB/T 2423.55-2023 Valid GBT 2423.55-2023
GB/T 2423.55-2006English250 Add to Cart 0-9 seconds. Auto delivery. Environmental testing for electric and electronic products - Part 2: Test method - Test Eh: Hammer tests GB/T 2423.55-2006 Obsolete GBT 2423.55-2006



GB/T 2423.55-2023. Environmental testing Part 2. Test method Test Eh. Hammer test ICS 19.040 CCSK04 National Standards of People's Republic of China Replace GB/T 2423.55-2006 Environmental testing Part 2.Test methods Test Eh. Hammer test Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contents Preface III Introduction IV 1 range 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 General rules for hammer test methods 2 4.1 Severity level 2 4.2 Test device 2 4.3 Preprocessing 4 4.4 Initial detection 4 4.5 Test 4 4.6 Recovery 4 4.7 Final inspection 4 4.8 Information to be provided on the specification4 5 Test Eha. Pendulum 5 5.1 Test device 5 5.2 Drop height 6 5.3 Test 6 6 Test Ehb. Spring Hammer 6 6.1 Test device 6 6.2 Effect of Gravity7 6.3 Calibration 7 7 Test Ehc. vertical falling weight 7 7.1 Test device 7 7.2 Drop height 7 Appendix A (normative) Shape of impact element 8 Appendix B (normative) Calibration of spring hammer 12 B.1 Calibration Principle 12 B.2 Structure of calibration device12 B.3 Calibration method of calibration device12 B.4 Use of calibration device 13 Appendix C (Informative) Guideline 17 C.1 Scope of application of hammer test 17 C.2 Selection of test equipment17 C.3 Selection of severity level17 C.4 Test related information17 Appendix D (informative) Pendulum test device example 18 Appendix E (informative) Spring hammer test device 21 Appendix NA (informative) GB/T 2423 constituent documents 22 Reference 25 Figure 1 Typical schematic diagram of impact element 3 Figure 2 Measuring point 5 Figure 3 Release end shape of 2J7 Figure A.1 Example of impact elements less than or equal to 1J8 Figure A.2 Example 8 of impact element of 2J Figure A.3 Example 9 of impact element of 5J Figure A.4 Example of 10J impact element 9 Figure A.5 Example of 20J impact element10 Figure A.6 Example of 50J impact element11 Figure B.1 Calibration device 13 Figure B.2 Pendulum “c” 14 Figure B.3 Steel spring for pendulum “c”14 Figure B.4 Part of the calibration device15 Figure B.5 Calibration diagram of calibration device 16 Figure B.6 Index plate “f” 16 Figure D.1 Pendulum test device18 Figure D.2 Impact element of a pendulum with energy less than or equal to 1J19 Figure D.3 Sample mounting base 19 Figure D.4 Conversion installation of embedded switch 20 Figure D.5 Lamp holder conversion installation 20 Figure E.1 Spring hammer test device 21 Table 1 Impact element characteristics 3 Table 2 Drop height 6 Table C.1 Theoretical values of energy levels17 Table E.1 Kinetic energy of impact elements21 Preface This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 55 of GB/T 2423.The published parts of GB/T 2423 are shown in Appendix NA. This document replaces GB/T 2423.55-2006 "Environmental testing of electrical and electronic products - Part 2.Test methods Test Eh. Hammering "Test", compared with GB/T 2423.55-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The test parameter value setting and its continuity considerations have been changed (see 4.1.2, Table 1 and Table 2); b) The terms and definitions have been changed, and the terms of different types of comparable test devices are collectively expressed to reflect standardization and uniformity (see Chapter 3, 3.1, 4.1 and 5.1 of the.2006 edition); c) Added a description of the installation requirements in the hammer test “Care should be taken to ensure that there is no obvious air gap between this layer of nylon and the support. gap. ” (See 4.2.2, 3.3.2 of the.2006 edition); d) Changed the description of the impact element in the vertical drop weight test device (see 7.1, 6.2 of the.2006 edition); e) Added further provisions and example descriptions of the surface and internal structures of basic test device elements (see Figures 1, 2 and Figure E.1); f) The applicable scope of the basic test device components has been changed (see 6.1, Figure D.2, 5.1, Figure D.2 of the.2006 edition); g) Added more accurate instructions and labels for the structure and location of the test device in the pictures (see Appendix A, Appendix B and Appendix E legend). This document is equivalent to IEC 60068-2-75.2014 "Environmental Testing Part 2-75.Test Test Eh. Hammer Test". This document has made the following minimal editorial changes. a) Added an informative appendix "Constituting Documents of GB/T 2423" (see Appendix NA). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed and coordinated by the National Standardization Technical Committee on Environmental Conditions and Environmental Testing of Electrical and Electronic Products (SAC/TC8). This document was drafted by. China Saibao (East China) Laboratory, Shanghai Institute of Quality Supervision and Inspection Technology, Ministry of Industry and Information Technology Electronics The Fifth Research Institute, Jiangsu Ruilan Automation Equipment Group Co., Ltd., Wuhu Saibao Information Industry Technology Research Institute Co., Ltd., Guangzhou Saibaoton Rui Information Technology Co., Ltd., Shanghai Taifeng Testing and Certification Co., Ltd. The main drafters of this document. Xu Yi, Xie Mingzhen, Yang Jianfeng, Wang Weihua, Wang Tingting, Wang Miao, Xiao Yi, He Dong, and Ling Wei. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 2423.55-2006 in.2006; ---This is the first revision. introduction Impact testing of electrical equipment using different hammers may produce mechanical stress. For the purpose of standardization, the results of the test are not Depending on the type of test apparatus that should be used, this document describes the characteristics of various test hammers designed to approximate as closely as possible the same severity level. The severity level is usually selected from GB/T 4796.1. For harmonization, it is necessary to change some basic parameters of the tests Ef. impact pendulum and Eg. impact spring hammer. in all cases Below, both sets of parameters are given at appropriate locations in the text. Although some quantities are no longer recommended, they remain as alternatives for continuity reasons. value due to their use as historical references in certain industries. GB/T 2423 includes basic information on environmental tests and their severity levels, and specifies the atmospheric conditions for various measurements and tests. It is used to evaluate the working ability of test samples under expected transportation, storage and various usage environments. Each document of GB/T 2423 is introduced separately. A set of experiments and applications. GB/T 2423 aims to provide product specifiers and product testers with a series of unified and repeatable environments. Environmental climatic, mechanical and combined tests, and includes standard atmospheric conditions for measurements and tests. Since 1981, GB/T 2423 has issued more than 50 documents (49 current national standards, 41 of which adopt IEC 60068-2 "Environmental Testing Part 2.Testing"). See Appendix NA for details of the constituent documents of GB/T 2423. Environmental testing Part 2.Test methods Test Eh. Hammer test 1 Scope This document describes the procedures for impacting samples under specified severity levels including the number, energy, and direction of impact. Three equivalent test methods. Used to evaluate the robustness of products in terms of electrical safety. This document applies to tests at energy levels from 0.14J to 50J. This document gives three devices suitable for testing. Appendix C provides guidance in this regard. 2 Normative reference documents The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. Note. GB/T 3934-2003 Technical conditions for ordinary thread gauges (ISO 1502.1996, MOD) Part 2.Rockwelhardness) Note. GB/T 3398.2-2008 Plastic hardness determination Part 2.Rockwell hardness (ISO 2039-2.1987, IDT) Vocabulary) Note. GB/T 2298-2010 Mechanical vibration, impact and condition monitoring vocabulary (ISO 2041.2009, IDT) ISO 2768-1 General tolerances Part 1.Tolerances on linear and angular dimensions without independent tolerance indications (Generaltolerances- Note. GB/T 1804-2000 general tolerances do not specify tolerances for linear and angular dimensions (ISO 2768-1.1989, IDT) ISO 6508 (all parts) Rockwell hardness test of metallic materials (Metalicmaterials-Rockwelhardnesstest) Note. GB/T 230 (all parts) Rockwell hardness test of metallic materials [ISO 6508 (all parts)] guidance) Note. GB/T 2421-2020 Environmental Testing Overview and Guidelines (IEC 60068-1.2013, IDT) Note. GB/T 4796.1-2017 Environmental condition classification Part 1.Environmental parameters and their severity (IEC 60721-1.2002, IDT) 3 Terms and definitions The following terms and definitions as defined in ISO 2041 and IEC 60068-1 apply to this document. 3.1 The mass of the striking element plus the mass of the element's fastening system. ......


GB/T 2423.55-2006 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 19.040 K 04 GB/T 2423.55-2006 / IEC 60068-2-75:1997 Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: Hammer tests (IEC 60068-2-75:1997, Environmental testing – Part 2: Tests – Test Eh: Hammer tests, IDT) ISSUED ON: FEBRUARY 15, 2006 IMPLEMENTED ON: JUNE 01, 2006 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 4  Introduction ... 6  1 Scope ... 7  2 Normative references ... 7  3 Provisions common to all hammer test methods ... 8  3.1 Definitions ... 8  3.2 Severities... 8  3.3 Test apparatus ... 8  3.4 Preconditioning ... 10  3.5 Initial measurements ... 10  3.6 Testing ... 10  3.7 Recovery ... 11  3.8 Final measurements ... 11  3.9 Information to be given in the relevant specification ... 11  4 Test Eha: Pendulum hammer ... 12  4.1 Definitions ... 12  4.2 Test apparatus ... 12  4.3 Height of fall ... 13  4.4 Testing ... 13  5 Test Ehb: Spring hammer ... 14  5.1 Test apparatus ... 14  5.2 Influence of earth's gravity ... 15  5.3 Calibration ... 16  6 Test Ehc: Vertical hammer ... 16  6.1 Definition ... 16  6.2 Test apparatus ... 16  6.3 Height of fall ... 16  Annex A (normative) Shapes of striking elements ... 17  Annex B (normative) Procedure for the calibration of spring hammers ... 20  B.1 Principle of calibration ... 20  B.2 Construction of the calibration device ... 20  B.3 Method of calibration of the calibration device ... 20  B.4 Use of the calibration device ... 22  Annex C (informative) Guide ... 27  C.1 When is an impact test appropriate? ... 27  C.2 Choice of the test apparatus ... 27  C.3 Choice of the energy level ... 27  C.4 Information for testing ... 28  Annex D (informative) Example of pendulum hammer test apparatus ... 29  Annex E (informative) Kinetic energy (E) just before impact ... 33  Foreword GB/T 2423 “Environmental testing for electric and electronic products - Part 2: Test methods” is divided into several parts according to the test methods. This part is Part 55 of GB/T 2423. This part is identical to IEC 60068-2-75:1997 “Environmental testing – Part 2: Tests – Test Eh: Hammer tests” (English version). This part is the first edition (IEC 60068-2-75 is the first edition). This part is equivalent to IEC 60068-2-75, which is determined by IEC Guide 104 as the basic safety standard. This part is equivalent to IEC 60068-2-75, which is determined by IEC Guide 108 as the basic environmental testing standard to be published. For convenience of use, this Part makes the following editorial changes: a) Change the word “this part of IEC 60068” to “this part of GB/T 2423” or “this part”; b) Use the decimal point “.” to replace the comma “,” as a decimal point; c) Delete the foreword of the international standard; d) Change this part to the current name, in order to be consistent with the names of other parts of the existing GB/T 2423; e) There is a 5-year lag between this part and the publication of the first edition of IEC 60068-2-75 in the process of national standard conversion. The 5-year transitional period was lost. For ease of use, add the version number and publication date to the statement “Remove the values in brackets 5 years after the publication of the first edition of IEC 60068-2-75: 1997 in August 1997”, and keep it consistent with the original text. Some of the normative documents cited in this part have not yet been converted into equivalent national standards, and are still listed with IEC/ISO numbers when these normative documents are cited. Annex A and Annex B of this part are normative annexes; Annex C, Annex D and Annex E are informative annexes. This part is proposed by the Fifth Institute of Electronics, Ministry of Information Industry. Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: Hammer tests 1 Scope This part of GB/T 2423 provides three equivalent test methods for impacting the sample under the specified severity conditions including the number of impacts, energy and direction of impact. It applies to the assessment of the robustness of the product according to the electrical safety clause. This part covers energy levels ranging from 0.14 joules (J) to 50 joules (J). Three types of test apparatus are applicable to perform these tests. Annex C provides some guidance as to this aspect. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this part. Parties to agreements based on this part should investigate the possibility of applying the most recent editions of the standards listed below. For undated references, the latest edition applies to this part. GB/T 2421-1999, Environmental testing for electric and electronic products - Part 1: General and guidance (idt IEC 60068-1:1988) GB/T 4796-2001, Classification of environmental conditions - Part 1: Environmental parameters and their severities (idt IEC 60721-1: 1990, Amendment 1, 1992) ISO 1052: 1982, Steels for general engineering purposes ISO 2039-2: 1987, Plastics - Determination of hardness - Part 2: Rockwell hardness ISO 2041: 1990, Vibration and shock - Vocabulary ISO 2768-1: 1989, General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerances indicated ISO 6508: 1986, Metallic materials - Hardness test - Rockwell test (scales A-B-C- D-E-F-G-H-K) ......

BASIC DATA
Standard ID GB/T 2423.55-2023 (GB/T2423.55-2023)
Description (Translated English) Environmental testing - Part 2: Test methods - Test Eh: Hammer tests
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 19.040
Word Count Estimation 30,351
Date of Issue 2023-09-07
Date of Implementation 2024-04-01
Older Standard (superseded by this standard) GB/T 2423.55-2006
Drafting Organization China Saibao (East China) Laboratory, Shanghai Quality Supervision and Inspection Technology Research Institute, Fifth Research Institute of Electronics of the Ministry of Industry and Information Technology, Jiangsu Ruilan Automation Equipment Group Co., Ltd., Wuhu Saibao Information Industry Technology Research Institute Co., Ltd., Guangzhou Saibao Tengrui Information Technology Co., Ltd., Shanghai Taifeng Testing and Certification Co., Ltd.
Administrative Organization National Standardization Technical Committee on Environmental Conditions and Environmental Testing of Electrical and Electronic Products (SAC/TC 8)
Proposing organization National Standardization Technical Committee on Environmental Conditions and Environmental Testing of Electrical and Electronic Products (SAC/TC 8)
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration

BASIC DATA
Standard ID GB/T 2423.55-2006 (GB/T2423.55-2006)
Description (Translated English) Environmental testing for electric and electronic products. Part 2: Test method. Test Eh: Hammer tests
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 19.040
Word Count Estimation 26,251
Date of Issue 2006-02-15
Date of Implementation 2006-06-01
Quoted Standard GB/T 2421-1999; GB/T 4796-2001; ISO 1052-1982; ISO 2039-2-1987; ISO 2041-1990; ISO 2768-1-1989; ISO 6508-1986
Adopted Standard IEC 60068-2-75-1997, IDT
Drafting Organization Ministry of Information Industry Institute of Electronics V
Administrative Organization China electrical and electronic products environmental conditions and environmental tests Standardization Technical Committee
Regulation (derived from) China Announcement of Newly Approved National Standards No. 3, 2006 (No. 90 overall)
Proposing organization Ministry of Information Industry Institute of Electronics fifth
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard provides a number of samples, including the impact of energy and implementation of the provisions of severity direction carried out under conditions equivalent to the impact of the three test methods. For electrical safety provisions by the strength of assessment products. This standard applies from 0. 14 joule (J) to 50 joules (J) energy level. This standard applies to tests given three devices. Appendix C provides guidance in this regard.