GB/T 19536-2015 (GB/T19536-2015, GBT 19536-2015, GBT19536-2015) & related versions
Buy with any currencies (Euro, JPY, KRW...): GB/T 19536-2015 Preview this PDF: GB/T 19536-2015
GB/T 19536-2015: PDF in English (GBT 19536-2015)
GB/T 19536-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 79.060.10
B 70
Replacing GB/T 19536-2004
Plywood for Container Flooring
ISSUED ON. JULY 3, 2015
IMPLEMENTED ON. NOVEMBER 2, 2015
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Application Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Classification... 6
5 Requirements ... 6
6 Test Methods ... 11
7 Inspection Rules ... 16
8 Marking, Packaging, Transportation and Storage ... 19
Annex A (Informative) Simulated Container Underframe for Test ... 20
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 19536-2004, Plywood for container flooring. Compared
with GB/T 19536-2004, the main differences of this Standard are as follows.
-- it changes application scope and adds bamboo-wood plywood for container
flooring and faced plywood for container flooring;
-- it adds categories;
-- it changes and supplements definitions;
-- it changes warping values in dimensions and dimensional deviations;
-- it changes appearance quality requirements;
-- it adds indexes and test methods for static bending strength, elasticity modulus
of bamboo-wood plywood for container flooring;
-- it cancels indexes and test methods for bonding strength;
-- it adds indexes and test methods for short-span shear force;
-- it adds indexes and test methods for concentrated load; and
-- it adds strength requirements and test methods for container flooring.
Attention is drawn to the possibility that some of the elements of this document may
be the subject of patent rights. The issuer of this document shall not be held
responsible for identifying any or all such patent rights.
This Standard was proposed by the State Forestry Administration.
This Standard shall be under the jurisdiction of the National Technical Committee 198
on Wood-based Panels Standardization of China (SAC/TC 198).
The drafting organizations of this Standard. Chinese Academy of Forestry Research
Institute of Wood Industry, CIMC Container Holding Co., Ltd., Xinhui Zhongji Wood Co.,
Ltd., Maoyou Timber Co., Ltd., Foshan Zhengsen Wood Co., Ltd., Jiangsu Happy
Wood Group Co., Ltd., Langfang Sanli Wood Co., Ltd., Deqing Sanke Insect-resist
Agents Co., Ltd., Huzhou Fenghe Glue Technology Co., Ltd., Zhejiang Yunfeng
Greeneo Co., Ltd. and Nanjing Forestry University.
The main drafters of this Standard. Yang Fan, Hu Shenghui, He Sidong, Tao Renzhong,
Cheng Jilie, Huang Qingbang, Wang Daojiang, Huang Anmin, Lv Bin, Wang Ximing,
Jin Jing, Cai Jiankun, Kou Fuping, Gu Shuixiang, Xu Bin and Jia Dongyu.
Plywood for Container Flooring
1 Application Scope
This Standard specifies the terms and definitions, classification, requirements, test
methods, inspection rules and marking, packaging, transportation and storage of
plywood for container flooring.
This Standard applies to plain or faced plywood which is generally used for container
flooring, made of wood veneers or bamboo-based elements (such as bamboo curtain,
bamboo mat and so on) and resistant to insects, corrosion and weathering.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced document (including any
amendments) applies to this Standard.
GB/T 1413-2008, Series 1 freight Containers – Classification, Dimensions and
Ratings
GB/T 2828.1-2012, Sampling Procedures for Inspection by Attributes – Part 1.
Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot
Inspection
GB/T 9846.2-2004, Plywood – Part 2. Tolerances on Dimensions
GB/T 17657, Test Methods of Evaluating the Properties of Wood-based Panels and
Surface Decorated Wood-based Panels
GB/T 18259-2009, Terms of Wood-based Panel and Its Surface Decoration
GB/T 19367-2009, Wood-based Panels – Determination of Dimensions of Panels
ISO 1496-1.2013, Series 1 Freight Containers – Specification and Testing – Part 1.
General Cargo Containers for General Purposes
3 Terms and Definitions
Those defined in GB/T 18259-2009 and the following terms and definitions apply to
this document.
3.1
plywood for container flooring
plywood which is generally used for container flooring, made of wood veneers or
bamboo-based elements (such as bamboo curtains, bamboo mats and so on) and
resistant to insects, corrosion and weathering
3.2
full-wood plywood for container flooring
plywood for container flooring, which is made by bonding wood veneers, including plain
plywood and faced plywood
3.3
bamboo-wood plywood for container flooring
plywood for container flooring, which is made by bonding bamboo elements and wood
elements, such as bamboo curtains and bamboo mats, including plain bamboo-wood
composite plywood and faced bamboo-wood composite plywood
4 Classification
4.1 It is divided into the following categories in accordance with materials.
a) full-wood plywood for container flooring; and
b) bamboo-wood composite plywood for container flooring.
4.2 It is divided into the following categories in accordance with surface treatment.
a) plain plywood for container flooring; and
b) faced plywood for container flooring.
5 Requirements
5.1 Structure
5.1.1 Full-wood plywood for container flooring
5.1.1.1 Face veneers shall be of full size with the tight surface facing outwards. The
vertical jointing of inner veneers shall not be more than 50% of the total number of
plies and shall not be more than 30 cm apart at the same location.
5.1.1.2 The veneers of symmetric plies on both sides of central ply shall be of the
same thickness, the same tree species or tree species of similar mechanical properties;
the grain direction shall also be the same.
As specified in the density measurement of GB/T 17657. The density of sample to be
tested is the arithmetic mean value of the densities of three test pieces, accurate to
0.01 g/cm3.
6.3.3 Water content test
As specified in the water content measurement of GB/T 17657. The water content of
sample to be tested is the arithmetic mean value of the densities of three test pieces,
accurate to 0.1%.
6.3.4 Static bending strength and elasticity modulus test
Carry out the test as specified in the “three-point bending” provisions for static bending
strength and elasticity modulus measurement in GB/T 17657.
The longitudinal and lateral static bending strength of sample to be tested is the
arithmetic mean value of the static bending strengths of three test pieces, accurate to
0.1 MPa.
The longitudinal and lateral elasticity modulus of sample to be tested is the arithmetic
mean value of the elasticity moduli of three test pieces, accurate to 10 MPa.
6.3.5 Immersion peeling performance test
Carry out the test as specified in the immersion peeling test in GB/T 17657. The
processing conditions of test pieces shall be as specified in the requirements for class
I immersion peeling test.
6.3.6 Short-span shear force test
6.3.6.1 Principle
Determine the maximum load borne by test pieces over a specified span.
6.3.6.2 Apparatus
Including.
a) universal mechanical tester, accurate to 10 N; and
b) Vernier caliper, division value 0.02 mm.
6.3.6.3 Test method
6.3.6.3.1 Test pieces are stored at (20 ± 2)˚C and relative humidity (65 ± 5)% to a
constant mass.
NOTE It is deemed that the mass is constant when the difference in mass measured two
times 24 h apart is less than 0.1% of the mass.
7.3.2 If the appearance quality, dimensions and mechanical performance of products
are as specified, then the batch of products is determined to be accepted, or else, it is
determined to be rejected.
8 Marking, Packaging, Transportation and Storage
8.1 Marking
8.1.1 Product marking
Products shall be marked at the proper positions with product name, manufacturer
name, product standard number, manufacturing date and inspection mark and so on.
8.1.2 Packaging label
Packaging label shall be indicated with product name, manufacturer name, address,
product standard number, manufacturing date, quantity and dampproof, sun protection
mark and so on.
8.2 Packaging
Products shall be packaged in accordance with specifications, tree varieties and batch
numbers when they are delivered. Package shall make sure that products are
protected from bump, scratch and contamination. The requirements for packaging can
also be as agreed by the supplier and the purchaser.
8.3 Transportation and storage
Products shall be piled in order during transportation and storage and protected from
contamination, damp, rainwater and sun...
......
| Standard ID | GB/T 19536-2015 (GB/T19536-2015) | | Description (Translated English) | Plywood for container flooring | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B70 | | Classification of International Standard | 79.060.10 | | Word Count Estimation | 16,194 | | Date of Issue | 2015-07-03 | | Date of Implementation | 2015-11-02 | | Older Standard (superseded by this standard) | GB/T 19536-2004 | | Quoted Standard | GB/T 1413-2008; GB/T 2828.1-2012; GB/T 9846.2-2004; GB/T 17657; GB/T 18259-2009; GB/T 19367-2009; ISO 1496-1-2013 | | Drafting Organization | Chinese Academy of Forestry Wood Industry Research Institute; CIMC Container Holdings Ltd; Xinhui CIMC Wood Co.; MY Timber Co., Ltd; Foshan is the Wood Co., Ltd.; Jiangsu Happy Wood Group Limited; Langfang Sanli Wood Co.; Ltd Deqing three subjects insect repellent; Huzhou Fenghe glue Technology Co., Ltd.; Zhejiang Hua Yunfeng new materials and technologies; Nanjing Forestry University | | Administrative Organization | China Wood-based Panel Standardization Technical Committee (SAC/TC 198) | | Regulation (derived from) | National Standard Announcement 2015 No.22 | | Proposing organization | State Forestry Administration | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This Standard specifies the terms and definitions for container flooring plywood, classification, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This Standard applies to the wood or bamboo veneer unit (bamboo, mats, etc.) composite made with wood veneer, with pest control, anti-corrosion and weathering performance, for general cargo container floor or cladding of plain plywood. |
|