HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (17 Feb 2024)

GB/T 19230.2-2003 (GB/T19230.2-2003)

Chinese standards (related to): 'GB/T 19230.2-2003'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
GB/T 19230.1-2003English209 Add to Cart 3 days Test method for evaluating gasoline detergent in use -- Part 1: Test method for rust preventing characteristics of gasoline detergent GB/T 19230.1-2003 Valid GBT 19230.1-2003
GB/T 19230.2-2003English70 Add to Cart 0-9 seconds. Auto delivery. Test method for evaluating gasoline detergent in use -- Part 2: Test method for demulsibility of gasoline detergent GB/T 19230.2-2003 Valid GBT 19230.2-2003


   
BASIC DATA
Standard ID GB/T 19230.2-2003 (GB/T19230.2-2003)
Description (Translated English) Test method for evaluating gasoline detergent in use - Part 2: Test method for demulsibility of gasoline detergent
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard E49
Classification of International Standard 75.140
Word Count Estimation 4,445
Date of Issue 2003-07-01
Date of Implementation 2003-12-01
Drafting Organization Ministry of Transportation Highway Research Institute
Administrative Organization China Petroleum & Chemical Corporation
Proposing organization Ministry of Communications of the People Republic of China
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China
Summary This standard specifies: gasoline detergent breaking performance Test methods and equipment. This standard applies to: gasoline detergent breaking performance evaluation.


GB/T 19230.2-2003: PDF in English (GBT 19230.2-2003)
GB/T 19230.2-2003
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 75.140
E 49
Test method for evaluating gasoline detergent in use - Part 2:
Test method for demulsibility of gasoline detergent
ISSUED ON: JULY 01, 2003
IMPLEMENTED ON: DECEMBER 01, 2003
Issued by: General Administration for Quality Supervision Inspection and
Quarantine of PRC
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 4 
4 Method overview ... 6 
5 Instruments ... 6 
6 Reagents ... 6 
7 Instrument preparation ... 6 
8 Preparation of test gasoline ... 7 
9 Test steps ... 7 
10 Report ... 8 
Test method for evaluating gasoline detergent in use - Part 2:
Test method for demulsibility of gasoline detergent
1 Scope
This Part specifies the test methods and test equipment for the demulsibility
performance of gasoline detergents.
This Part applies to the evaluation of the demulsibility performance of gasoline
detergents.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For the dated references, the subsequent amendments
(excluding corrections) or revisions do not apply to this Standard; however, parties who
reach an agreement based on this Standard are encouraged to study if the latest versions
of these documents are applicable. For undated references, the latest edition of the
referenced document applies.
GB/T 11117.2 Knock test reference fuels - Reference fuel - n-Heptane
3 Terms and definitions
The following terms and definitions apply to this Part.
3.1
Film
A thin, translucent layer, which does not stick to the walls of glass cylinders.
3.2
Lace
Fibers thicker than fine fragments, OR fibers more than 10% bonded to each other,
or both.
3.3
Water reaction volume change
Qualitative indication of the presence of water-soluble components in gasoline.
4 Method overview
At room temperature, put the test gasoline and phosphate buffer solution, into a clean
stoppered glass graduated cylinder. Shake the cylinder as required. Then, check the
cleanliness of the glass cylinder, the volume change of the water layer, the interface
condition of the water reaction, the degree of separation.
5 Instruments
Stoppered glass graduated cylinder: 100 mL total scale, with 1 mL divisions. The
distance from the 100 mL scale line to the mouth of the measuring cylinder is (50 ~ 60)
mm.
6 Reagents
6.1 n-heptane: Meet the requirements of GB/T 11117.2 for reference fuel.
6.2 Glass cleaning solution: Non-ionic detergent cleaning solution, if necessary, use
chromic acid lotion (strong corrosiveness, harmful to health).
6.3 Distilled water.
6.4 Acetone: Analytically pure (flammable, harmful to health).
6.5 Anhydrous potassium hydrogen phosphate: Analytically pure.
6.6 Anhydrous potassium dihydrogen phosphate: Analytically pure.
6.7 Phosphate buffer solution (pH 7): Prepare it, by dissolving 1.15 g of anhydrous
potassium hydrogen phosphate (K2HPO4) and 0.47 g of anhydrous potassium
dihydrogen phosphate (KH2PO4), in 100 mL of distilled water. If more phosphate buffer
solution is needed, it can be prepared, according to the above ratio. The laboratory can
also use the above-mentioned buffer solutions prepared commercially.
7 Instrument preparation
Wash the graduated cylinder thoroughly before testing. The cleaning process is as
follows:
7.1 Rinse the graduated cylinder and stopper with hot tap water. Brush it if necessary.
......