GB/T 18388-2005 (GB/T18388-2005, GBT 18388-2005, GBT18388-2005) & related versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
GB/T 18388-2005 | English | 70 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Electric vehicles -- Engineering approval evaluation program
|
GB/T 18388-2005
| Valid |
GBT 18388-2005
|
GB/T 18388-2001 | English | 279 |
Add to Cart
|
3 days
|
The electric vehicles stereotypes testing procedures for
|
GB/T 18388-2001
| Obsolete |
GBT 18388-2001
|
Buy with any currencies (Euro, JPY, KRW...): GB/T 18388-2005 Preview this PDF: GB/T 18388-2005
GB/T 18388-2005: PDF in English (GBT 18388-2005) GB/T 18388-2005
GB
ICS 43.080.01
T 47
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing GB/T 18388-2001
Electric Vehicles – Engineering Approval
Evaluation Program
Issued on May 23, 2005 Implemented on October 01, 2005
Issued by General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China
Standardization Administration of the People’s Republic of
China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Implementing Conditions ... 5
4 Test Items, Test Methods and Basis for Evaluation ... 6
5 Test Procedure ... 8
6 Test Report ... 8
Annex A (Normative) Mandatory Standards ... 9
Foreword
This Standard replaces GB/T 18388-2001 Electric vehicles - Engineering approval
evaluation program.
Compared with GB/T 18388-2001, the main changes of this Standard are as follows.
— Add the provision - referring to GB 1495-2002 Limits and measurement methods for
noise emitted by accelerating motor vehicles, when carrying out noise test emitted by
accelerating motor vehicles. (See 4.1.1)
— Add the provision - referring to GB 11555-1994 Passenger cars - Windshield
demisters - Performance requirements, when carrying out performance test of
windshield demisters. (See 4.1.2)
— Add the provision - referring to GB 11556-1994 Passenger cars - Windshield
defrosters - Performance requirements, when carrying out performance test of
windshield defrosters. (See 4.1.3)
— Change the driving test content in 4.3. Rearrange the driving mileage. Total driving
mileage of reliability driving test is 50% of the total driving mileage of reliability driving
that corresponds to engineering approval evaluation program of diesel vehicle. If the
total driving mileage is lower than 5000km, perform it as 5000km. In mileage
distribution, 35% is bad-road, 65% is flat-road and highway.
Annex A of this Standard is normative.
This Standard was proposed by National Technical Committee on Road Vehicles of
Standardization Administration of China.
This Standard shall be under the jurisdiction of National Technical Committee on Road
Vehicles of Standardization Administration of China.
Drafting organization of this Standard. China Automotive Technology and Research
Center.
Main drafters of this Standard. Liu Guibin, Chen Song, He Yuntang, and Zhao Ziliang.
The previous edition replaced by this Standard. GB/T 18388-2001.
Electric Vehicles –
Engineering Approval Evaluation Program
1 Scope
This standard specifies the implementing conditions, test items, test methods, basis of
evaluation, and test reports of new product design and approval evaluation test of pure
electric vehicles.
This standard is applicable to pure electric vehicles.
2 Normative References
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this
Standard. For the undated documents so quoted, the latest editions shall be applicable to
this Standard.
GB/T 18384.1 Electric vehicles - Safety specification - Part 1. On-board energy
storage
GB/T 18384.2 Electric vehicles - Safety specification - Part 2. Functional means and
protection against failures
GB/T 18384.3 Electric vehicles - Safety specification - Part 3. Protection of persons
against electric hazards
GB/T 18385 Electric vehicles - Power performance - Test method
GB/T 18386 Electric vehicles - Reference energy consumption and range - Test
procedures
GB/T 18387 Performance levels and methods of measurement of magnetic and
electric field strength from electric vehicles, broadband, 9 kHz to 30 MHz
The mandatory standards cited by this Standard are shown in Annex A.
Annex A
(Normative)
Mandatory Standards
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this
Standard. For the undated documents so quoted, the latest editions shall be applicable to
this Standard.
GB 1495 Limits and measurement methods for noise emitted by accelerating motor
vehicles
GB 1589 Limits of dimensions, axle load and masses for road vehicles
GB 4094 Motor vehicles - Symbols for controls, indicators and tell-tales
GB 4599 Photometric characteristics of headlamps for motor vehicles
GB 4660 Photometric characteristics of front fog lamps for motor vehicles
GB 4785 Prescription for installation of the external lighting and light signalling
devices for motor vehicles and their trailers
GB 5920 Photometric characteristics of front and rear position lamps, end-outline
marker lamps and stop lamps for motor vehicles and their trailers
GB 7063 The wheel guards of motor vehicles
GB 7258 Safety specifications for motor vehicles operating on roads
GB 8410 Flammability of automotive interior materials
GB 9656 Safety glasses for road vehicles (for certification)
GB 9743 Passenger car tyres
GB 9744 Truck tyres
GB 11550 Motor vehicles - Seats head vestraints performance requirements and test
methods
GB 11552 Passenger car--Internal protrusions
GB 11554 Photometric characteristics of rear fog lamps for motor vehicles and their
trailers
GB 11555 Passenger cars-Windshield demisters-Performance requirements
GB 11556 Passenger cars-Windshield defrosters-Performance requirements
GB 11557 The stipulation protecting drivers from being injured by motor vehicle
steering mechanism
GB 11562 Motor vehicles- Forward visibility for drivers- Requirements and
measurement methods
GB 11564 Retro reflector for motor vehicles
GB 11565 Passenger cars-Windshield wipers-Wiped areas
GB 11566 Passenger car-External protrusions
GB 11567.1 Motor vehicles and trailers-Lateral protection requirements
GB 11567.2 Motor vehicles and trailers-Rear underrun protection requirements
GB 12676 Road vehicle--Braking systems--Structure, performance and test methods
GB 13057 The strength of the seats and their anchorages of passenger vehicles
GB 13094 The safety requirements for bus construction
GB 14023 Vehicles, motorboats and spark-ignited engine-driven devices--Radio
disturbance characteristics--Limits and methods of measurement
GB 14166 Safety belts and restraint systems for adult occupants of motor vehicles
GB 14167 Motor vehicles-Safety belt anchorages
GB 15082 Motor vehicles—Speed meters
GB 15083 Motor vehicles-Seat systems-Strength requirements and test methods
GB 15084 Motor vehicles-Rear view mirrors-Requirements of performance and
installation
GB 15085 Motor vehicles-Windshield wipers and washer systems-Performance
requirements and test methods
GB 15086 Motor vehicles-Door locks and door hinges-Performance requirements
and test methods
GB 15235 Photometric characteristics of reversing lamps for motor vehicles and their
trailers
GB 15740 Motor vehicle - Protective devices against unauthorized use -
Performance requirements
GB 15741 The licence plates (crackets) and its position on motor vehicles and trailer
GB 15742 Performance requirements and test methods of horn for motor vehicles
GB 15743 Passenger car-Strength of side doors
GB 15766.1 Lamps for road vehicles. Dimensional electrical and luminous
requirements
GB 16735 Road vehicles--Vehicle identification number (VIN)--Location and
attachment
GB 16897 Brake hose
GB 17354 Front and rear protective devices for passenger cars
GB 17509 Photometric characteristics of direction indicators for motor vehicles and
their trailers
GB 17675 Steering system of motor vehicles--Basic requirements
GB 18099 Photometric characteristics of side-marker lamps for motor vehicles and
their trailers
GB 18409 Photometric characteristics of parking lamps for power-driven vehicles
GB 18655 Limits and methods of measurement of radio disturbance characteristics
for the protection of receivers used on board vehicles
GB 18986 The safety requirements for light bus construction
GB 19151 Warning triangles for motor vehicle
......
Standard ID | GB/T 18388-2005 (GB/T18388-2005) | Description (Translated English) | Electric vehicles - Engineering approval evaluation program | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | T47 | Classification of International Standard | 43.080.01 | Word Count Estimation | 8,866 | Date of Issue | 2005-05-23 | Date of Implementation | 2005-10-01 | Older Standard (superseded by this standard) | GB/T 18388-2001 | Quoted Standard | GB/T 18384.1; GB/T 18384.2; GB/T 18384.3; GB/T 18385; GB/T 18386; GB/T 18387, | Drafting Organization | China Automotive Technology and Research Center | Administrative Organization | National Automotive Standardization Technical Committee | Regulation (derived from) | Announcement of Newly Approved National Standards No. 7 of 2005 (No. 81 overall) | Proposing organization | National Automotive Standardization Technical Committee | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee | Summary | This standard specifies the pure electric vehicle test new product designs have been finalized conditions for implementation, pilot projects, test methods, determine the basis and test reports. This standard applies to pure electric vehicles. |
|