HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (28 Jan 2023)

GB/T 16507.4-2013 (GBT 16507.4-2013)

Chinese standards (related to): 'GB/T 16507.4-2013'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
GB/T 16507.1-2022English419 Add to Cart 4 days Water-tube boilers - Part 1: General requirements GB/T 16507.1-2022 Valid GBT 16507.1-2022
GB/T 16507.4-2022English1099 Add to Cart 7 days Water-tube boilers - Part 4: Strength calculation of pressure parts GB/T 16507.4-2022 Valid GBT 16507.4-2022
GB/T 16507.1-2013English839 Add to Cart 4 days Water-tube boilers -- Part 1: General requirement GB/T 16507.1-2013 Obsolete GBT 16507.1-2013
GB/T 16507.4-2013English150 Add to Cart 0--3 minutes. Auto immediate delivery. Water-tube boilers -- Part 4: Strength calculation of pressure parts GB/T 16507.4-2013 Obsolete GBT 16507.4-2013
GB/T 16507-1996EnglishRFQ ASK 3 days Rules for construction of stationary boilers GB/T 16507-1996 Obsolete GBT 16507-1996


   
BASIC DATA
Standard ID GB/T 16507.4-2013 (GB/T16507.4-2013)
Description (Translated English) Water-tube boilers - Part 4: Strength calculation of pressure parts
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J98
Classification of International Standard 27.060.30
Word Count Estimation 52,586
Older Standard (superseded by this standard) GB/T 9222-2008; GB/T 16507-1996
Quoted Standard GB 150; GB/T 16507.1; GB/T 16507.2; GS/T 16507.5; DL/T 5366; JB/T 6734
Drafting Organization Shanghai Power Equipment Research Institute
Administrative Organization National Standardization Technical Committee Boiler and Pressure Vessel
Regulation (derived from) National Standards Bulletin 2013 No. 27
Proposing organization National Boiler and Pressure Vessel Standardization Technical Committee (SAC/TC 262)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the strength calculation methods, materials, water tube boiler pressure components designed to permit the use of stress and determine the maximum allowable working pressure of the component verification methods. This standard appli


GB/T 16507.4-2013: PDF in English (GBT 16507.4-2013)
GB/T 16507.4-2013
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 27.060.30
J 98
Partially replacing GB/T 16507-1996 and GB/T 9222-2008
Water-Tube Boilers - Part 4.
Strength Calculation of Pressure Parts
ISSUED ON. DECEMBER 31, 2013
IMPLEMENTED ON. JULY 1, 2014
Jointly Issued by. General Administration of Quality Supervision,
Inspection and Quarantine (AQSIQ);
Standardization Administration (SAC) of the People's
Republic of China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative References ... 5 
3 Terms and Definitions ... 5 
4 General Requirements ... 6 
5 Permissible Stress ... 7 
6 Calculated Wall Temperature ... 7 
7 Calculation Pressure ... 9 
8 Efficiency ... 10 
9 Component Thickness ... 16 
10 Required Thickness ... 17 
11 Opening Reinforcement ... 24 
12 Methods for Verifying the Maximum Permissible Working Pressure of
Component ... 31 
13 Additional Thicknesses ... 37 
14 Maximum Permissible Working Pressure ... 38 
15 Additional Stress Check ... 42 
16 Structural Constraint and Requirements ... 44 
Appendix A (Normative) Low-cycle Fatigue Life Calculation for Boiler Drum ... 54 
Appendix B (Informative) Method for Adopting the Designed Additional
Pressure ΔPa ... 63 
Appendix C (Informative) Adoption of Process Additional Thickness under
General Conditions ... 64 
Appendix D (Informative) Approximation Algorithm for Elastic Section Modulus
of Opening-attenuation Section Wx1 ... 66 
Foreword
GB/T 16507 “Water-tube Boilers” includes the following eight parts.
- Part 1. General;
- Part 2. Materials;
- Part 3. Structural Design;
- Part 4. Strength Calculation of Pressure Parts;
- Part 5. Manufacture;
- Part 6. Inspection, Test and Acceptance;
- Part 7. Safety Appurtenances and Instruments;
- Part 8. Installation and Operation.
This part is Part 4 of GB/T 16507.
This part was drafted according to the rules specified in GB/T 1.1-2009.
This part partially replaces GB/T 16507-1996 and GB/T 9222-2008. The main
technical differences are as follows.
- This part was formulated based on GB/T 9222-2008. The requirements regarding
the materials and permissible stress table in GB/T 9222-2008 were incorporated
into Part 2 of this standard (GB/T 16507.2); the structural requirements on
process were incorporated into Part 3 (GB/T 16507.3). This part contains the
other contents in GB/T 9222-2008 and has integrated the relevant contents in
GB/T 16507-1996. The chapters were divided according to the calculation
process, including 16 chapters and 4 appendixes.
- Partial symbols, angle code and the like in the primary standard were modified;
- The permissible stress correction coefficient table was modified and only the
correction coefficients of the material permissible stress related to the component
operating condition were preserved. Others permissible stress correction
coefficients regarding the structures were abolished. Equivalent correction was
considered in calculation of component thickness. The structural coefficients of
corresponding components were modified and permissible stress correction
coefficient 0.95 for boiler drum and head of a rated pressure larger than or equal
to 16.7MPa was cancelled;
- The determination method of calculation pressure was modified and the
requirements that the calculation pressure shall be larger than or equal to the
sum of the operating pressure and the additional pressure designed for safety
valve setting were explicitly defined; the mandatory provision concerning the
designed additional pressure for safety valve setting was cancelled, and the
additional pressure value is optional by reference to informative Appendix B;
- The weld efficiency table was modified and the weld efficiency was determined
according to the weld groove form and non-destructive testing scope;
- The determination method of additional process thickness was modified and the
relevant mandatory provisions were cancelled. Appendix C (informative) can be
referred for adoption of additional process thickness;
- The thickness calculation formulae for outer arc, middle arc and inner arc of bent
tube or bend were provided, and specified that the required thickness of inner arc
of the bent tube or elbow with an outer diameter exceeding 100mm shall be
checked;
- The thickness calculation specifications for the small-bore tube which is subject to
external pressure were modified; and the provision about referring to the standard
calculation stated in GB 150 was added;
- Partial structural forms of flat lid were adjusted and newly-added;
- Provisions related to the verification of stress analysis were added and the
concerning general procedures were specified.
This part was proposed by and shall be under the jurisdiction of National Technical
Committee on Boilers and Pressure Vessels of Standardization Administration of
China (SAC/TC 262).
Chief drafting organization of this part. Shanghai Power Equipment Research
Institute.
Participating drafting organizations of this part. Harbin Boiler Co. Ltd., Dongfang
Boiler Group Co., Ltd., Shanghai Boiler Works Co., Ltd., Wuhan Boiler Co., Ltd., Wuxi
Huaguang Boiler Co., Ltd., Babcock & Wilcox Beijing Company Ltd., Hangzhou Boiler
Group Co., Ltd., Power Equipment National Engineering Research Center, Sichuan
Chuanguo Boiler Co., Ltd., and Jinan Boiler Group Co., Ltd.
Chief drafting staffs of this part. Li Liren, Liang Jianping, Xiao Zhonghua, Dong
Shihong, Xiao Huifang, Yao Meichu, Luo Sheng, Zheng Shuiyun, Zhao Weimin, Li Lin,
Zhang Qiangjun, Wu Xiangpeng, Sheng Jianguo, Chen Wei, and Mao Hefang.
The previous editions replaced by this part are as follows.
- GB/T 9222-2008;
- GB/T 16507-1996.
Water-Tube Boilers - Part 4. Strength
Calculation of Pressure Parts
1 Scope
This part of GB/T 16507 specifies the strength calculation of pressure parts used in
water-tube boilers and the designed permissible stress of materials, and determines
the method for verifying the maximum permissible working pressure of parts.
This part is applicable to the pressure parts of water-tube boilers defined in GB/T
16507.1, including boiler drum, header drum, tube, pipeline within the range of boiler,
convex head, flat lid and cover plate, tee joint and other non-rectangular components.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments)
applies.
GB 150 Pressure Vessels
GB/T 16507.1 Water-tube Boilers - Part 1. General Provisions
GB/T 16507.2 Water-tube Boilers - Part 2. Materials
GS/T 16507.5 Manufacture
DL/T 5366 Technical Code for Calculating Steam/Water Piping Stress in
Fossil Power Plants Code for Designing
JB/T 6734 Strength Calculation Method for Boiler Fillet Weld
3 Terms and Definitions
For the purposes of this document, the terms and definitions defined in GB/T 16507.1
and the following ones apply.
3.1 Corrosion allowance thickness
The additional thickness by considering the corrosion thickness thinning in the
designed service life of pressure parts.
3.2 Minus tolerance of thickness
The absolute value of the permissible lower minus tolerance of thickness as specified
in material standard.
3.3 Processing thinning of thickness
The reduced thickness in manufacturing process.
3.4 Minimum required thickness
The required thickness by taking consideration of such loads as calculation pressure
and corrosion thickness thinning.
3.5 Component size
Unless otherwise specified, it indicates the sizes in the drawing.
3.6 Hot-extruded tee
Hot-extruded straight tee and drum tee by molds using seamless steel tube.
3.7 Straight tee
The tee with the diameter of branch not larger than that of the main...
......