GB/T 13793-2016 (GB/T13793-2016, GBT 13793-2016, GBT13793-2016) & related versions
Buy with any currencies (Euro, JPY, KRW...): GB/T 13793-2016 Preview this PDF: GB/T 13793-2016
GB/T 13793-2016: PDF in English (GBT 13793-2016)
GB/T 13793-2016
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.75
H 48
Replacing GB/T 13793-2008
Steel pipes with a longitudinal
electric (resistance) weld
ISSUED ON. AUGUST 29, 2016
IMPLEMENTED ON. JULY 01, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Classification and code ... 9
4 Order content ... 9
5 Size, shape, weight and allowable deviation ... 10
6 Technical requirements ... 15
7 Test methods ... 21
8 Inspection rules ... 23
9 Marking, packaging and quality certificates ... 24
APPENDIX A (Normative) Uniformity test for galvanized layer - Copper sulfate
impregnation method ... 25
APPENDIX B (Normative) Unit weight measurement of galvanized layer -
Antimony chloride method ... 27
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 13793-2008 “Steel pipes with a longitudinal
electric (resistance) weld”. As compared with GB/T 13793-2008, the main
changes are as follows.
- MODIFY the scope of application;
- MODIFY the allowable dimensional deviations;
- MODIFY the allowable deviation of sizing length and length of double length;
- MODIFY the weight conversion factor of galvanized steel pipe;
- ADD the designation Q275, Q390, Q420, Q460; DELETE the designation
Q295 AND its technical requirements;
- DELETE the post-weld cold and hot working methods from the
manufacturing method;
- MODIFY the mechanical property requirements of Q195;
- ADD the sampling methods and sampling locations for tensile test;
- MODIFY the transverse tensile test requirements of welds;
- MODIFY the non-destructive testing requirements of welds in steel pipes;
- MODIFY the galvanized layer weight requirements;
- MODIFY the conversion factor of the unit weight and thickness of
galvanized layer.
This standard was proposed by the China Iron and Steel Association.
This standard shall be under the jurisdiction of the National Steel
Standardization Technical Committee (SAC/TC 183).
This standard was drafted by Zhejiang Jinzhou Pipeline Technology Co., Ltd.,
Tianjin Youfa Steel Pipe Group Co., Ltd., Tianjin Juncheng Steel Pipe Group
Co., Ltd., Jinghua Innovation Group, National Petroleum and Natural Gas
Pipeline Engineering Technology Research Center (Baoji Petroleum Steel Pipe
Co., Ltd.), Anji Zhongyuan Pipe Industry Co., Ltd., Qian'an Zhengda Steel Pipe
Co., Ltd., Metallurgical Industry Information Standards Institute.
Steel pipes with a longitudinal
electric (resistance) weld
1 Scope
This standard specifies the classification and code, ordering content, size,
shape, weight and allowable deviations, technical requirements, test methods,
inspection rules, marking, packaging and quality certificates of the steel pipes
with a longitudinal electric (resistance) weld.
This standard applies to the steel pipes with a longitudinal electric (resistance)
weld which is used for machinery, construction and other structural purposes,
AND for which the outer diameter is not greater than 711 mm; it is also
applicable to the welded steel pipes for general fluid delivery services.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The
diantipyrylmethane phosphomolybdate gravimetric method for the
determination of phosphorus content
GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total
silicon content - Reduced molybdosilicate spectrophotometric method
GB/T 223.9 Iron, steel and alloy - Determination of aluminium content -
Chrom azurol S photometric method
GB/T 223.11 Iron, steel and alloy - Determination of chromium content -
Visual titration or potentiometric titration method
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy - The
sodium carbonate separation - Diphenyl carbazide photometric method for
the determination of chromium content
GB/T 223.14 Methods for chemical analysis of iron, steel and alloy - The N-
Benzoy-N-Pheylhydroxylamine extraction photometric method for the
determination of vanadium content
GB/T 223.16 Methods for chemical analysis of iron, steel and alloy - The
chromotropic acid photometric method for the determination of titanium
content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The
sodium thiosulfate separation - The iodometric method for the determination
of copper content
GB/T 223.19 Methods for chemical analysis of iron, steel and alloy - The
NHCM - chloride-chloroform extraction photometric method for the
determination of copper content
GB/T 223.23 Methods for chemical analysis of iron, steel and alloy - The
dimethylglyoxime spectrophotometric method for the determination of nickel
content
GB/T 223.32 Methods for chemical analysis of iron, steel and alloy - The
hypophosphite reduction-iodometric method for the determination of arsenic
content
GB/T 223.37 Methods for chemical analysis of iron, steel and alloy - The
indophenol blue photometric method for the determination of nitrogen
content after distillation separation
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the
suphochlorosulfonol S spectrophotometric method
GB/T 223.53 Methods for chemical analysis of iron, steel and alloy - The
flame atomic absorption spectrophotometric method for the determination of
copper content
GB/T 223.54 Methods for chemical analysis of iron, steel and alloy - The
flame atomic absorption spectrophotometric method for the determination of
nickel content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The
sodium arsenite-sodium nitrite titration method for the determination of
manganese content
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content -
Bismuth phosphomolybdate blue spectrophotometric method and antimony
phosphomolybdate blue spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The
perchloric acid dehydration gravimetric method for the determination of
silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The
ammonium phosphomolybdate volumetric method for the determination of
phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The
butyl acetate extraction photometric method for the determination of
phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The
sodium periodate (potassium) photometric method for the determination of
manganese content
GB/T 223.64 Iron, steel and alloy - Determination of manganese content -
Flame atomic absorption spectrometric method
GB/T 223.67 Iron, steel and alloy - Determination of sulfur content -
Methylene blue spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The
potassium iodate titration method after combustion in the pipe furnace for
the determination of sulfur content
GB/T 223.69 Iron, steel, and alloy - Determination of carbon contents - Gas-
volumetric method after combustion in the pipe furnace
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The
gravimetric method after combustion in the pipe furnace for the
determination of carbon content
GB/T 223.72 Iron, steel and alloy - Determination of sulfur content -
Gravimetric method
GB/T 223.74 Methods for chemical analysis of iron, steel and alloy - The
combustion gravimetric/gas-volumetric method for the determination of
combined carbon content
GB/T 228.1 Metallic materials - Tensile testing - Part 1. Method of test at
room temperature
GB/T 229 Metallic materials - Charpy pendulum impact test method
GB/T 241 Metallic materials - Tube - Hydrostatic pressure test
GB/T 242 Metallic materials - Tube - Flaring test
GB/T 244 Metallic materials - Tube - Bend test
GB/T 246 Metallic materials - Tube - Flattening test
GB/T 699-2015 Quality carbon structural steel
GB/T 700-2006 Carbon structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 2102 Acceptance, packing, marking and quality certification of steel
pipe
GB/T 2650 Impact test methods for welded joint
GB/T 2651 Tensile test method on welded joints
GB/T 2975 Steel and steel products - Location and preparation of test pieces
for mechanical testing
...
......
| Standard ID | GB/T 13793-2016 (GB/T13793-2016) | | Description (Translated English) | Steel pipes with a longitudinal electric (resistance) weld | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H48 | | Classification of International Standard | 77.140.75 | | Word Count Estimation | 17,110 | | Date of Issue | 1992-11-16 | | Date of Implementation | 2017-07-01 | | Older Standard (superseded by this standard) | GB/T 13793-2008 | | Quoted Standard | GB/T 222; GB/T 223.3; GB/T 223.5; GB/T 223.9; GB/T 223.11; GB/T 223.12; GB/T 223.14; GB/T 223.16; GB/T 223.18; GB/T 223.19; GB/T 223.23; GB/T 223.32; GB/T 223.37; GB/T 223.40; GB/T 223.53; GB/T 223.54; GB/T 223.58; GB/T 223.59; GB/T 223.60; GB/T 223.61; GB/T 223.62; GB/T 223. | | Drafting Organization | Tianjin Jinzhou Pipe Group Co., Ltd., Jinghua Innovation Group, the National Petroleum and Natural Gas Pipeline Engineering Technology Research Center (Baoji Petroleum Steel Pipe Co., Ltd.), Anji Zhongyuan (Tianjin) Co., Ltd., Tianjin Jinzhou Pipeline Technology Co., Ltd., Tianjin Youfa Steel Pipe Group Co., Pipe Industry Co., Ltd., Qian An Chase Steel Pipe Co., Ltd., Metallurgical Industry Information Standards Institute | | Administrative Organization | National Steel Standardization Technical Committee (SAC/TC 183) | | Regulation (derived from) | National Standard Announcement 2016 No.14 | | Proposing organization | China Iron and Steel Association | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, Standardization Administration of the People Republic of China | | Summary | This standard specifies the classification and code, ordering content, size, shape, weight and tolerances, technical requirements, test methods, inspection rules, marking, packaging and quality certificates of straight seam welded steel pipes. This standard applies to mechanical, architectural and other structural purposes, and the diameter is not greater than 711mm straight seam welded steel pipe, but also can be applied to the general use of fluid welding with welded steel pipe. |
|