Powered by Google www.ChineseStandard.net Database: 189759 (14 Jul 2024)

GB/T 13531.4-2013 related PDF English

GB/T 13531.4-2013 (GB/T13531.4-2013, GBT 13531.4-2013, GBT13531.4-2013) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 13531.4-2013English105 Add to Cart 0-9 seconds. Auto delivery. General methods on determination of cosmetics -- Determination of relative density GB/T 13531.4-2013 Valid GBT 13531.4-2013
GB/T 13531.4-1995English199 Add to Cart 2 days Generel methods on determination of cosmetics--Determination of relative density GB/T 13531.4-1995 Obsolete GBT 13531.4-1995
Buy with any currencies (Euro, JPY, KRW...): GB/T 13531.4-2013    Preview this PDF: GB/T 13531.4-2013



GB/T 13531.4-2013: PDF in English (GBT 13531.4-2013)
GB/T 13531.4-2013
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.70
Y 42
Replacing GB/T 13531.4-1995
General methods on determination of cosmetics -
Determination of relative density
ISSUED ON: SEPTEMBER 06, 2013
IMPLEMENTED ON: FEBRUARY 15, 2014
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Method I: Density bottle method ... 4
3 Method II: Density meter method ... 5
4 Method III: Instrument method ... 6
General methods on determination of cosmetics -
Determination of relative density
1 Scope
This Part of GB/T 13531 specifies the test methods for the relative density of
liquid and semi-solid cosmetics.
The Method I and Method II of this Part are applicable to the determination of
relative density of liquid cosmetics.
The Method III of this Part is applicable to the determination of relative density
of liquid and semi-solid cosmetics.
2 Method I -- Density bottle method
2.1 Principle
Respectively measure the mass of the sample and distilled water of the same
volume at a certain temperature. The ratio of the mass of the sample to the
mass of distilled water is the relative density.
2.2 Instruments
2.2.1 Density bottle: A 25 mL density bottle with a thermometer. The division
value of the thermometer is 0.5 °C.
2.2.2 Constant temperature water bath: The temperature control accuracy is ±
0.5 °C.
2.2.3 Analytical balance: The division value is 0.0001 g.
2.3 Procedure
TAKE a clean density bottle and PLACE it in a drying cabinet at 100 °C ~ 105 °C
to dry to a constant weight; MEASURE its mass (accurate to 0.0001 g). Then
ADD the distilled water that has just been boiled and cooled to about 2 °C lower
than the specified temperature; FILL the density bottle; INSERT a thermometer.
Then PLACE the bottle in a constant temperature water bath at the specified
temperature for 20 min. After the distilled water reaches the specified
temperature, USE filter paper to wipe off the water overflowing the capillary;
to formula (3):
where:
ρ - the liquid density, in grams per cubic centimeter (g/cm3);
A - the U-shaped tube constant, in grams per cubic centimeter quadratic
microseconds (g/cm3 · μs2);
P - the oscillation period, in microseconds (μs);
B - the U-shaped tube constant, in grams per cubic centimeter (g/cm3).
4.2 Instrument
4.2.1 Digital density meter: with automatic viscosity correction and temperature
heat balance functions, such as DMA4100M, or equivalent.
4.2.2 Accuracy of digital density meter:
- Temperature ± 0.05 °C (0 ~ 50 °C);
- Density ± 0.0001g/cm3 (0 ~ 3 g/cm3).
If an autosampler is used, the viscosity of the sample at t °C of the instrument
is not more than 35 Pa · s.
4.3 Procedure
4.3.1 CALIBRATE the instrument according to the requirements of the
instrument instructions before test.
4.3.2 SET the temperature of the instrument to the temperature for test.
4.3.3 USE a syringe to inject the sample and fill a clean and dry measuring cell.
4.3.4 CONFIRM that the measuring cell is free of bubbles through the bubble
detection function or through the observation window.
4.3.5 When the instrument steadily displays the density value or relative density
value, record the value.
4.4 Result representation
Take the average of the two determinations as the final result.
......

BASIC DATA
Standard ID GB/T 13531.4-2013 (GB/T13531.4-2013)
Description (Translated English) General methods on determination of cosmetics - Determination of relative density
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y42
Classification of International Standard 71.100.70
Word Count Estimation 6,678
Older Standard (superseded by this standard) GB/T 13531.4-1995
Drafting Organization Shanghai Research Institute of Daily Chemical Industry
Administrative Organization Fragrance Flavor and Cosmetic National Standardization Technical Committee
Regulation (derived from) National Standards Bulletin 2013 No. 17
Proposing organization China Light Industry Association
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies: liquid, semi-solid cosmetic relative density test methods. The standard of the first method, the second method is suitable for liquid cosmetic relative density determination. The third method is applicable to the standard liquid,