GB 5009.230-2016 (GB5009.230-2016) & related versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
GB 5009.230-2016 | English | 70 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
National Food Safety Standard -- Determination of carbonyl value
|
GB 5009.230-2016
| Valid |
GB 5009.230-2016
|
Buy with any currencies (Euro, JPY, KRW...): GB 5009.230-2016 Preview this PDF: GB 5009.230-2016
GB 5009.230-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
National Food Safety Standard -
Determination of Carbonyl Value in Foods
ISSUED ON. AUGUST 31, 2016
IMPLEMENTED ON. MARCH 1, 2017
Issued by. National Health and Family Planning Commission of the
People’s Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Principle ... 4
3 Reagents and Materials ... 4
4 Instruments and Equipment ... 5
5 Analytical Procedures ... 5
6 Expression of Analysis Results ... 6
7 Precision ... 7
National Food Safety Standard -
Determination of Carbonyl Value in Foods
1 Scope
This Standard specifies the method of determining carbonyl value in foods.
This Standard is applicable to the determination of carbonyl value in foods, such as
fried food, nut, instant noodle, puffed food and edible vegetable oil, etc.
2 Principle
In alkaline solution, the reaction product of carbonyl compound and
2,4-dinitrophenylhydrazine generates maroon or wine red. Determine absorbance at
the wavelength of 440 nm and calculate carbonyl value.
3 Reagents and Materials
3.1 Reagents
3.1.1 Ethanol (C2H6O). analytical purity.
3.1.2 Benzene (C6H6). spectral purity or chromatographic purity.
3.1.3 2,4-dinitrophenylhydrazine (C6H6N4O4). analytical purity.
3.1.4 Trichloroacetic acid (C2H6Cl3O2). analytical purity.
3.1.5 Potassium hydroxide (KOH). analytical purity.
3.1.6 Petroleum ether (C5H12O2). analytical purity, boiling range. 30 °C~60 °C.
3.1.7 Aluminum powder (Al). analytical purity.
3.2 Preparation of Reagents
3.2.1 Refined ethanol. take 1,000 mL of ethanol and place it in 2,000 mL round-bottom
flask; add 5 g of aluminum powder, zeolite and 10 g of potassium hydroxide; connect
with the reflux condenser of standard grinding mouth; start heating and reflux for 1 h in
water bath, then, adopt all-glass distillation unit to distill and gather the distillate.
3.2.2 Trichloroacetic acid solution. weigh-take 4.3 g of solid trichloroacetic acid, add
100 mL of benzene to dissolve it.
evaporator under the room temperature; decompress and recover the reagent; use
air-blowing drying oven to volatilize petroleum ether for 1 h under 50 °C, then, obtain
grease for later determination. Store it in the refrigerator under 4 °C before usage.
5.2.3 Samples with low content of grease, such as bread and biscuit. weigh-take 250
g~300 g of mixed sample and place it in 500 mL wide-mouth bottle with a lid; add an
appropriate amount of petroleum ether to soak the sample and place it for 14 h~18 h.
Take quick filter paper to filter it; start rotary evaporation for 15 min with a rotary
evaporator under the room temperature; decompress and recover the reagent; use
air-blowing drying oven to volatilize petroleum ether for 1 h under 50 °C, then, obtain
grease for later determination. Store it in the refrigerator under 4 °C before usage.
5.2.4 Samples with high content of water. add an appropriate amount of anhydrous
sodium sulfate to make the sample granular; easily agglomerated sample. add 4
times~6 times of sea sand, mix it up, then, extract grease.
5.3 Determination
Weigh-take 0.025 g~0.5 g (accurate to 0.1 mg) of grease sample. weigh-take 0.1 g of
grease sample with carbonyl value < 30 meq/kg; weigh-take 0.05 g of grease sample
with carbonyl value 30 meq/kg~60 meq/kg; weigh-take 0.025 g of grease sample with
carbonyl value >60 meq/kg; place it in 25 mL tube with a plug, then, add 5 mL of
benzene to dissolve the grease sample; add 3 mL of trichloroacetic acid solution and
5 mL of 2,4-dinitrophenylhydrazine solution; meticulously shake it and mix it up.
Heat it up for 30 min in water bath at 60 °C; after reaction, take it out and use running
water to cool it down to the room temperature. Slowly add 10 mL of potassium
hydroxide-ethanol solution along the tube wall to turn it into two-liquid layer. Start
vortex oscillation and mix it up, then, place it evenly for 10 min.
Take 1 cm colorimetric cup and adjust the zero point with reagent blank; measure
absorbance at the wavelength of 440 nm.
6 Expression of Analysis Results
Carbonyl value in the sample shall be calculated in accordance with Formula (1).
Where.
X - Carbonyl value (calculated by grease) of the sample, expressed in (meq/kg);
A - The absorbance of the sample during determination;
......
Standard ID | GB 5009.230-2016 (GB5009.230-2016) | Description (Translated English) | National Food Safety Standard -- Determination of carbonyl value | Sector / Industry | National Standard | Classification of Chinese Standard | X09 | Word Count Estimation | 5,597 | Date of Issue | 2016-08-31 | Date of Implementation | 2017-03-01 | Older Standard (superseded by this standard) | GB/T 5009.37-2003 | Regulation (derived from) | Announcement of the State Administration of Public Health and Family Planning 2016 No.11 | Standard ID | () | Description (Translated English) | (Technical specifications for ceramic capacitive sensor type partial discharge monitoring devices of 35kV and below) | Sector / Industry | Chinese Industry Standard | Date of Issue | 2023-10-11 | Date of Implementation | 2024-04-11 | Issuing agency(ies) | National Energy Board | Standard ID | () | Description (Translated English) | (Technical specifications for ceramic capacitive sensor type partial discharge monitoring devices of 35kV and below) | Sector / Industry | Chinese Industry Standard | Date of Issue | 2023-10-11 | Date of Implementation | 2024-04-11 | Issuing agency(ies) | National Energy Board |
|