GB 32029-2015 (GB32029-2015) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB 32029-2015 | English | 90 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Minimum allowable values of energy efficiency and energy efficiency grades for small-size submersible motor-pumps
|
GB 32029-2015
| Obsolete |
GB 32029-2015
|
Buy with any currencies (Euro, JPY, KRW...): GB 32029-2015 Preview this PDF: GB 32029-2015
GB 32029-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Minimum Allowable Values of Energy Efficiency
and Energy Efficiency Grades for Small-Size
Submersible Motor-Pumps
ISSUED ON. SEPTEMBER 18, 2015
IMPLEMENTED ON. OCTOBER 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Forward ... 3
1 Scope ... 4
2 Normative References ... 4
3. Terms and Definitions ... 4
4 Basic Requirements ... 5
5 Energy Efficiency Grades ... 5
6 Minimum Allowable Values of Energy Efficiency ... 7
7 Evaluating Values of Energy Conservation ... 7
8 Test Methods ... 7
9 Inspection Rules ... 7
10 Labels of Energy Efficiency Grades ... 8
Forward
The Chapter 6 in this Standard is mandatory, while the rest are recommended.
This standard was drafted as per the rules specified in GB/T 1.1-2009.
This standard was proposed by the Resource Conservation and Environmental
Protection Division of the National Development and Reform Commission, as well as
the Department of Energy Conservation and Resources Utilization of the Ministry of
Industry and Information Technology.
This standard shall be under the jurisdiction of National Technical Committee for
Standardization of Energy Fundamentals and Management (SAC/TC 20), and
National Technical Committee on Agricultural Machinery of Standardization (SAC/TC
201).
Drafting organizations of this Standard. Technical Research Center of Fluid Machinery
Engineering in Jiangsu University, Chinese Academy of Agricultural Mechanization
Sciences, Shimge Pump Group Industry Co., Ltd., Leo Group Co., Ltd., Hangzhou
SRT Pump Co., Ltd., Zhejiang Dayuan Pumps Industrial Co., Ltd., Shandong
Celebrity Group Co., Ltd., Zhejiang Fengyuan Pump Industry Co., Ltd., Zhejiang
Fengqiu Pump Industry Co., Ltd., Fuan Yuandong American China Electric Co., Ltd.,
Haicheng Suprasuny Pump Co., Ltd., Nanjing Lanshen Pump Group Co., Ltd.,
Taizhou Jiadi Pump Industry Co., Ltd., Zhejiang Qifeng Pump Industry Co., Ltd.,
Shanxi Skysea Pump Industry Co., Ltd., Zhejing Institute of Mechanical and Electrical
Engineering Co., Ltd., and Zhejiang Wenling Institute of Supervision & Testing
on Product Quality.
Chief drafting staffs of this Standard. Wang Yang, Zhang Xiansheng, Xu Mintian,
Wang Xiangrong, Lu Qiurong, Zhao Liwei, Wang Guoliang, Zhou Jianquan, Sun
Jianguo, Lou Qifeng, Chen Jianming, Li Lulu, Chen Bin, Chen Xianyuan, Jiang
Ronghua, Shang Huaiyuan, He Chaohui, Jin Shibin, and Ma Xinhua.
Minimum Allowable Values of Energy Efficiency
and Energy Efficiency Grades for Small-Size
Submersible Motor-Pumps
1 Scope
This Standard specifies the energy efficiency grades, minimum allowable values of
energy efficiency, evaluating values of energy conservation, test methods, inspection
rules, and labels of energy efficiency grades for the small-size submersible
motor-pumps.
This Standard is applicable to the single or three-phase, and single or multi-stage
small-size submersible motor-pumps (hereinafter referred to as “pump”) of which the
power is less than or equal to 22kW.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this standard.
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1. Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes
(Apply to Inspection of Process Stability)
GB/T 12785-2014 Test Methods for Submersible Motor-Pumps
GB/T 25409 Small-Size Submersible Motor-Pumps
3. Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Minimum allowable values of energy efficiency for small-size submersible
motor-pumps
shall be marked as per the requirements of labels of energy efficiency.
10.2 The manufacturer shall at least indicate the rated energy efficiency grade and
executive standard number of the pump in the product instructions; meanwhile, in
accordance with the relevant provisions of labels of energy efficiency, the label of
energy efficiency shall be pasted at an obvious position of the product.
......
| Standard ID | GB 32029-2015 (GB32029-2015) | | Description (Translated English) | Minimum allowable values of energy efficiency and energy efficiency grades for small-size submersible motor-pumps | | Sector / Industry | National Standard | | Classification of Chinese Standard | F01 | | Classification of International Standard | 27.010 | | Word Count Estimation | 7,745 | | Date of Issue | 2015-09-18 | | Date of Implementation | 2016-10-01 | | Quoted Standard | GB/T 2828.1; GB/T 2829; GB/T 12785-2014; GB/T 25409 | | Drafting Organization | Technology Research Center of Fluid Machinery Engineering, Jiangsu University; Chinese Academy of Agricultural Mechanization Sciences; New Territories Pump Group Co., Ltd; Leo Group Co., Ltd.; Hangzhou Slater Pump Co., Ltd.; Zhejiang Dayuan Pump Co., Ltd.; Shandong celebrities Industry Group Ltd; Zhejiang Fengyuan Pump Co; Zhejiang Ruifeng ball Pump Co., Ltd.; Far East and the United States Electric Co., Ltd. Fuan; Haicheng three fish Pump Co., Ltd.; deep blue Nanjing Zhibeng (Group) Co., Ltd; Taizhou Jia Di Pump Co; Ltd Zhejiang Qifeng Pump; Pump Co., Ltd. Shanxi days; Zhejiang Institute of Electrical and Mechanical Services Limited; Wenling City in Zhejiang Province product quality supervision and inspection | | Administrative Organization | National Standardization Technical Committee for Energy and Management (SAC/TC 20) National Standardization Technical Committee (SAC/TC 201) Agricultural Machinery | | Regulation (derived from) | National Standard Announcement 2015 No.28 | | Proposing organization | Ministry of Industry and Information Technology Energy Saving and Comprehensive Utilization Department; National Development and Reform Commission Resource Conservation and Environmental Protection | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This standard specifies the small submersible pump energy efficiency rating, energy efficiency limit value and energy conservation evaluation values, test methods, inspection rules and energy efficiency rating logo. This standard applies to the power of 22 kW or less single-phase or three-phase, single-stage or multi-stage small submersible pump (hereinafter referred to as pump). |
|