HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (9 Nov 2024)

GB 21861-2014 Related PDF English (GB 21861-2008)

GB 21861-2014 (GB21861-2014) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB 21861-2014English150 Add to Cart 0-9 seconds. Auto delivery. Items and methods of power-driven vehicles safety technology inspection GB 21861-2014 Obsolete GB 21861-2014
GB 21861-2008EnglishRFQ ASK 9 days Items and methods of power-driven vehicles safety technology inspection GB 21861-2008 Obsolete GB 21861-2008
Buy with any currencies (Euro, JPY, KRW...): GB 21861-2014    Preview this PDF: GB 21861-2014



GB 21861-2014 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.180 R 80 Replacing GB 21861-2008 Items and methods of motor vehicles safety technical inspection ISSUED ON. DECEMBER 22, 2014 IMPLEMENTED ON. MARCH 01, 2015 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of Contents Foreword ... 3  Introduction ... 6  1 Scope ... 8  2 Normative references ... 8  3 Terms and definitions ... 9  4 Inspection items ... 10  5 Inspection method ... 13  6 Inspection requirements ... 19  7 Handling of inspection result ... 36  8 Transitional period of implementation of standards ... 38  Annex A ... 39  Annex B ... 42  Annex C ... 43  Annex D ... 49  Annex E ... 51  Annex F ... 52  Annex G ... 53  Annex H ... 57  Annex I ... 59  Bibliography ... 64  - Added “inspection requirements”(see chapter 6 of this version); - Deleted “(affirmation for the identify of vehicle)inspection item and requirement” (6.1.1 and 6.2.1 of version 2008); - Deleted “off-line inspection” (Chapter 8 of version 2008); - Deleted “in-line inspection” (Chapter 9 of version 2008); - Deleted “road test inspection” (Chapter 10 of version 2008); - Deleted “supplementary statement for inspection of two-wheeled and three-wheeled motor vehicle” (Chapter 11 of version 2008); - Revised the evaluation requirements for inspection result (see 7.1 of this version; 12.2 of version 2008); - Added the inspection qualification disposal requirements (see 7.2 of this version; 12.4 of version 2008); - Added the inspection non-qualification disposal requirements (see 7.3 of this version); - Revised abnormal situation disposal requirements (see 7.4 of this version; 6.1.2 and 6.2.2 of version 2008); - Added transition requirement for the implementation of the standard (see chapter 8 of this version); - Deleted Annex A Main features and technical parameters (Annex A of version 2008); - Deleted Annex B Appearance inspection, chassis dynamic test and vehicle chassis inspection test of vehicles, inspection item (Annex B of version 2008); - Deleted Annex C Manual inspection item for two-wheeled and three wheeled motor vehicle (Annex C of version 2008); - Deleted Annex D Braking performance parameter calculation method (Annex D of version 2008); - Added Annex A Outer size measurement (see Annex A of this version); - Added Annex B Curb-mass measurement (see Annex B of this version); - Added Annex C Braking performance test (see Annex C of this version); - Added Annex D Headlamp inspection (see Annex D of this version); - Added Annex E Travel speed indicator error inspection (see Annex E of this version); Items and methods of motor vehicle safety technical inspection 1 Scope This Standard specified the inspection items, inspection method, inspection requirements and disposal of inspection results of the motor vehicle safety technical inspection. This Standard is applicable to motor vehicle safety technical inspection institutions for motor vehicle safety technical inspection. This Standard also applies to the entry inspection and quarantine institution for entry of motor vehicle safety technical inspection. Motor vehicles which are approved to conduct actual road test and motor vehicle of temporary entry can conduct safety technical inspection with reference to this Standard. This Standard does not apply to safety technical inspection of tractor on road for tractor transportation unit. 2 Normative references The following documents are indispensable for application of this document. For the dated documents so quoted, only the dated versions apply to this document. For the undated documents so quoted, the latest versions (including all modification sheets) apply to this document. GB 1589 Limits of dimensions, axle load and masses for road vehicles GB/T 3730.2 Road vehicle – Masses - Vocabulary and codes GB/T 3730.3 Motor vehicles and towed vehicles - Dimensions of vehicles - Terms and definitions GB 4785 Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers GB 7258-2012 Safe specification for power-driven vehicles operating on roads GB 11567.1 Motor vehicles and trailers - Lateral protection requirements GB 11567.2 Motor vehicles and trailers - Rear underrun protection requirements GB 13094 The safety requirements for bus construction GB 13392 The vehicle mark for road transportation dangerous goods GB 16735 Road vehicle-Vehicle identification number (VIN) GB/T 17676 Natural gas vehicle and liquefied petroleum gas vehicle Identification marks GB 18564.1 Road tanker for dangerous liquid goods transportation - Part 1. Technical requirements of atmospheric pressure metal tank GB 18986 The safety requirements for light bus construction GB/T 19056 Vehicle travelling data recorder GB 19151 Warning triangles for motor vehicle GB 20300 Safety specifications for road transportation vehicle of explosive substance and chemical toxic substance GB 24315 The marker of school bus GB 24407 The safety technique specifications of special school buses GB 25990 Rear-marking plates for vehicles and their trailers GB/T 26765 Specifications for power-driven vehicle safety inspection business information system and networking GA 36 License plate of motor vehicle of the people’s republic of china GA 802 Types of motor vehicle - Terms and definitions GA 804 Special fixing device for license plate of motor vehicle GA 1186 General technical specifications for monitoring system of vehicle safety inspection 3 Terms and definitions The following terms and definitions defined in GB 7258 and GA 802 apply to this document. 3.1 Inspection for unregistered vehicle Safety technical inspection that motor vehicle safety technical inspection institution conducted to motor vehicle applied for registration. 3.2 Inspection inspection for in - use the vehicle Safety technical inspection that motor vehicle safety technical inspection institution conducted to motor vehicle registered. 3.3 Inspection for the identify of the vehicle Inspection shall be made to plate number and type of motor vehicle, vehicle brands and models, vehicle identification number (or vehicle factory number), engine number (or electric motive number), vehicle color and appearance to confirm identity of inspected motor vehicle. 3.4 Inspection for the characteristic parameters of the vehicle Inspection shall be made to outer size of motor vehicle, curb-mass, verified passenger carrying number and other main features and technical parameters of vehicles to confirm conformance to national security technical standard of motor vehicle, product announcement of motor vehicle, factory certificate of motor vehicle, driving certificate of motor vehicle and other technical data. 3.5 Chassis operating inspection In driving state, qualitatively judge whether steering system, driving system, braking system, instrument and indicator of inspected motor vehicle meet the safety requirements. 4 Inspection items 4.1 Safety technical inspection item of motor vehicle is shown in table 1. 4.2 When the entry inspection and quarantine authority inspected entry motor vehicles which need to obtain motor vehicle certificates before driving on the road, it shall cover inspection item as stipulated in table 1, and implement according to requirement of registration and inspection. 4.3 Safety technical inspection item of wheel special mechanical cars and tramcar shall be confirmed with reference to table 1 and relevant requirements of national standards and industry standards. 6.3.4.1 The verified passenger carrying number of the motor vehicle shall meet carrying regulations of 4.5.2 to 4.5.6 and 11.6 in GB 7258-2012. 6.3.4.2 When inspection for unregistered vehicle, the verified passenger carr... ......


GB 21861-2008 Items and methods of power-driven vehicles safety technology inspection ICS 43.180 R80 National Standards of People's Republic of China Motor vehicle safety inspection items and methods Published 2008-05-26 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China issued Table of Contents Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative References 1 Terms and definitions 1 3 4 test methods and test items 1 5 and the basic requirements of the inspection process inspection vehicle 4 The only identified 4 of 6 vehicles 7 Networking inquiry 5 External test line 8 6 9 inspection line 10 10 road test test 13 11 SUPPLEMENTARY three motor vehicle inspection instructions 14 12 test results of the audit and inspection reports dispose of 15 13 inspection report issued by the data store 15 Annex A (normative) Main features and technical parameters 16 Annex B (normative) visual inspection of the vehicle, the vehicle chassis and the chassis dynamic testing inspection test items 17 Annex C (normative) two, three motor vehicle manual inspection item 20 Annex D (normative) braking performance parameter calculation method 22 Annex E (normative) motor vehicle safety inspection record sheet (artificial test section) 23 Appendix F (Normative Appendix) motor vehicle safety inspection report 25 Annex G (normative) two, three motor vehicle safety inspection record sheet (artificial test section) 27 Appendix H (normative) two, three motor vehicle safety inspection report 28 Reference 29 Foreword 4.1 to 4.3 standard Chapter 4, Chapter 6, Section 12, 12.4 and 12.1 ~ Appendix A, to Appendix B, appendix C, Appendix D is a strong Compulsory, the rest are recommended. This Standard Appendix A, to Appendix B, appendix C, Appendix D, Appendix E, Appendix F, Appendix G, Annex H are normative. The standard proposed by the People's Republic of China Ministry of Public Security. This standard by the Ministry of Public Management Standardization Technical Committee on Road Traffic. Embodiment of the present transition standard requirements. --- Chapter 4 in Table 1 for more than 20 years of useful life of the non-operating passenger car chassis of the output power requirements of the test, since 2009 Since July 1 implementation; --- This standard relates to motor vehicle safety inspection agencies and the public security organs traffic management network provision (such as networking to send inquiry Check whether the motor vehicle involved in a car accident and has not yet finished processing the traffic safety violations occur), after the real conditions are met Shi, when the conditions are not met in abeyance. This standard is drafted by. Institute of Ministry of Public Security Traffic Management Science. Participated in the drafting of this Standard. Ministry of Public Security Traffic Safety Product Quality Supervision and Testing Center, the Beijing Traffic Management Bureau vehicles Management, Chengdu Public Security Bureau Motor Vehicle Safety Testing Center, China Quality Certification Center, Wenzhou City, Jiang Xing Automobile testing equipment factory in Shijiazhuang, China Yan Transportation Technology Co., Ltd. The main drafters. should Chaoyang, Yu Chunjun, Zhao Dejun, Zhou Xiangdong, Xie Penghong, Zhou Shensheng, Chen Nanfeng, Qin Wei East, in Wing Chun, Zhang Tao, Liao Qingbin, Zhang Hong Jun, Wu Yunqiang, Chu Gui Yang. This standard was first formulated. introduction Article 15 provides that "Road Traffic Safety Law of People's Republic of China Regulations for the Implementation". "motor vehicle safety inspection of motor vehicles Implementation of safety and technical inspection. Motor vehicle safety inspection agency shall enter the vehicle in accordance with national testing standards motor vehicle safety technology Line inspection, the inspection results bear legal responsibility. "At present, China has not yet issued national standards for motor vehicle safety inspection of motor vehicle safety The main technical inspection agency in accordance with public safety industry standard "motor vehicle safety inspection items and methods" (GA468-2004) into the motor vehicle Safety and technical inspection line technical conditions, confirm the seized items of motor vehicle meets the national standard "safe operation of motor vehicles technical conditions" Requirements (GB 7258) and other national security vehicle technical standards. "People's Republic of China on Road Traffic Safety Law" Article 13 (2) clearly states. "the implementation of community safety and technical inspection of motor vehicles Of. The specific measures by the State Council. "And" Article 15, paragraph 2 People's Republic of China on Road Traffic Safety Law Implementing Regulations, "the further It states. "The quality and technology supervision department is responsible for management and measurement certification qualifications for the management of motor vehicle safety and technical inspection of motor vehicle safety Full technical inspection equipment for examination, the implementation of the national motor vehicle safety inspection standards of supervision. "This shows that motor vehicle safety Conduct a full technical inspection has been transformed from one administrative act of public security traffic management department of the grounds impartial third party inspection agency Issued by the inspection data to social behavior, qualified management and oversight responsibilities of motor vehicle safety inspection agencies are mainly technical quality and technical Supervision departments to bear. In addition, the State Administration of Quality Supervision, Inspection and Quarantine and the Standardization Administration of China was July 12, 2004 United Co-approved and promulgated GB 7258-2004, but mainly relied upon in making GA468-2004 is GB 7258-1997, a number of GB 7258- 2004 The new requirements have not been reflected in the GA468-2004 in. Therefore, as soon as possible to develop national standards for motor vehicle safety inspection, In a nationwide unified motor vehicle safety inspection programs and methods, not only to further standardize vehicle safety and technical inspection passenger behavior Concept requirements, but also effectively implement the "People's Republic of China on Road Traffic Safety Law" and its implementing regulations of one of the specific measures. The main principles of the criteria established in the development process are. a) referring to the new technical requirements GB 7258-2004, combined with the actual needs of road traffic safety management, according to the "Chinese people Provisions of existing road traffic safety laws and regulations of the Road Traffic Safety Law, "the Republic of China and its implementing regulations, etc., in GA468- The development of motor vehicle safety inspection items and methods of national standards on the basis of 2004. b) a clear registration and inspection requirements with different motor vehicle inspection, and strengthen motor vehicle safety inspection of "at source" as Use, vehicle management to ensure that current national laws, regulations, policies effectively implemented. c) clearly motor vehicle safety inspection program, refine test methods and audit requirements, in order to further improve the standard of scientific and Operability. This standard test items listed in exhaust emissions, but considering Beijing and some other areas have implemented a "motor vehicle environmental inspection mark Chi ", and the State Environmental Protection Administration also is brewing in the country to promote" green vehicle inspection marks, "This standard specifies. the introduction of" mobile Car environmental inspection marks "where emissions (exhaust pollutants measurement) is no longer included in the safety inspection. It should be noted that, in accordance with relevant provisions of the "People's Republic of China Road Traffic Safety Law" and its implementing regulations, the national motor vehicle production Product authority in accordance with the national motor vehicle safety and technical standards recognized by the production of motor vehicle type, the models of the new car at the factory through inspection When the motor vehicle meets the national safety standards and obtaining inspection certificate, apply for motor vehicle registration, technical inspection from safety. Motor vehicle safety inspection items and methods 1 Scope This standard specifies the test items of motor vehicle safety inspection requirements and test methods. This standard applies to motor vehicle safety inspection agencies in our road safety and technical inspection of motor vehicles, the standard Also applies to motor vehicle inspection agency for import and export entry vehicle safety and technical inspection. Approval by the relevant authorities for the actual road test When the test vehicle safety and technical inspection can be carried out with reference to this standard. 2 Normative references Terms of the following documents become provisions of this standard by reference in this standard. For dated reference documents, all later Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to agreements based on this standard Whether the latest versions of these documents. For undated references, the latest version applies to this standard. GB 7258 Safety requirements for operation of motor vehicles 3 Terms and Definitions GB 7258 and determined the following terms and definitions apply to this standard. 3.1 Registration test inspectionforunregisteredvehicles Motor vehicle safety and technical inspection of the production license confiscated by the state departments (immigration), or by the relevant law enforcement agencies, the auction, to be led Take the road on the motor vehicle license plate of the motor vehicle, safety and technical inspection carried out at the time of its application for registration. 3.2 With motor vehicle inspection inspectionforin-usepower-drivenvehicles Motor vehicle safety inspection agency has registered the motor vehicle safety and technical inspection. 3.3 The uniqueness of the vehicle identified identificationofvehicles For motor vehicle license plate number, vehicle type, brand/model, color, engine number, vehicle identification number (serial number or vehicle) and Main features and technical parameters of verification, checking vehicle identification number (serial number or vehicle) rubbing the film in order to confirm the submission of a motor vehicle CD A resistance. 3.4 Chassis dynamic test chassisoperatinginspection In the running state judged qualitatively inspection vehicle steering system, drive train, braking system, and indicators of compliance with operational safety Claim. 4 test methods and test items 4.1 at least four wheels motor vehicles (except special wheeled machinery) testing methods and test items safety and technical inspection of Table 1, Second, the test methods and test project safety and technical inspection of the three vehicles in Table 2. 4.2 Import and Export motor vehicle inspection required to obtain motor vehicle license plate agency on road until the entry of the motor vehicle inspection, the test items Entry should cover Table 1 (including Appendix A and to Appendix B, the same below) registration and inspection items specified in Table 2 (including Appendix A and Appendix C). 4.3 Test items divided by attribute item veto and recommended maintenance items. Equipment inspection items, the exhaust brake, high beam headlight beam hair Light intensity, wheels and chassis partial rejected output power term, the remainder being recommended maintenance item. Project Labor inspection item of property, see Appendix B Table B.1, Table B.2, B.3 and Appendix Table C Table C.1 of the "Project Properties" column. 4.4 wheeled machinery vehicle safety inspection program in accordance with the requirements of the relevant national standards and industry standards refer to Table 1 to determine. 4.5 tractors and other transportation units traveling on the road tractor safety inspection program will be forthcoming. Table 1 test methods and test items of motor vehicle safety inspection (at least four wheels of the motor vehicle) Test mode test items Remarks The uniqueness of the vehicle identified ① license plate number; ② vehicle type; ③ make/model; ④ color; ⑤ launch Machine number; ⑥ vehicle identification number (serial number or vehicle) and the striking engraved features; ⑦ main To the features and technical parameters a Networking inquiry Query whether the motor vehicle inspection and traffic accidents occurred involving not yet processed Road traffic safety violations Line outside inspection Visual inspection of the vehicle ① appearance of the body; ② the illumination means and the electrical signal; ③ engine compartment; ④ cab (region); ⑤ engine running Forwarding condition; ⑥ internal bus; ⑦ chassis member; ⑧ wheel; ⑨ Other Specific inspection items in Appendix B of Table B.1 Chassis dynamic test ① steering system; ② driveline; ③ braking system; ④ Instrumentation And indicators Specific test items in Appendix B of Table B.2 In-line inspection Vehicle speedometer indication error b Only a maximum design speed of more than 40km/h of the vehicle required C Emissions 1. Double automotive ignition engine idling exhaust emission. CO.'s, the volume fraction of the HC, the excess air ratio λ. 2. A compression ignition engine vehicle exhaust smoke free acceleration Method. Light adsorption coefficient (on October 1, 2001 onwards Production car) or filter type value (for 2001 September 30 and produced before that date car). 3. The low-speed vehicles free acceleration smoke exhaust Method. Value filter type Excess air ratio λ test only makes Closed-loop control of electronic fuel injection system Ignition and catalytic converters Technology Engine car performed. Using BASM draining measured When the amount of test items to be determined Brake D (including the wheel weight) Wheel ①; ② left and right wheels the maximum braking force; ③ brake The maximum force increase braking force difference in the left and right wheels of the whole process; ④ brake coordination time; ⑤ wheel retarding force; ⑥ parking brake power Brake Coordinated Time (④) with the drum When the brake is not required test station tests; Cart Wheel blocking force (⑤) only automotive requirements Steering wheel slip amount lateral sideslip Front axle of the independent suspension on the vehicle side Slip amount not to judge based on the value of the test Headlamp ① beam headlamp beam luminous intensity; ② headlamp Light beam irradiation position (around the center of the beam offset, and Vertical offset); ③ headlamp dipped beam irradiation position (Corner vertices cutoff line position) Headlight beam detecting the beam irradiation position Only the inspection beam can be adjusted individually beam Headlight requirements Vehicle chassis ① steering system; ② driveline; ③ driving system; ④ brake System; ⑤ electrical circuit; ⑥ other chassis member Specific inspection items, see Appendix B of the table B.3 Chassis power output Use only non-life of more than 20 years Operating requirements for passenger cars TABLE 1 (cont.) Test mode test items Remarks Road test test A service brake Braking stability and braking distance, level or fully developed Average deceleration, braking stability and braking Coordinated Universal Time Parking brake parking brake performance Vehicle speedometer indication error Usually only car that can not be tested on line And line test results in the vehicles have questioned car Vehicles were Only when required by the relevant authorities For full-time four-wheel drive vehicles can not be detected on the line Measuring an error indication speedometer vehicle a main feature and technical parameters refers to a motor vehicle certified (registered) structure, framework or features, as well as state motor vehicle department in charge of product announcements Data (see Appendix A). b speedometer indication error detection of AWD vehicle or the like can not be performed is not on the line of the vehicle. Where c implementation of environmental inspection marks, emissions (exhaust pollutants measurement) is no longer included in the safety inspection. d axle load exceeds the allowable load capacity of the test equipment of the vehicle, the vehicle is not on-line multi-axis can not be performed in-line braking test, road test should Table 2 test methods and test items of motor vehicle safety inspection (two, three motor vehicles) Test mode test items Remarks The uniqueness of the vehicle identified ① license plate number; ② vehicle type; ③ make/model; ④ color; ⑤ launch Machine number; ⑥ vehicle identification number (serial number or vehicle) and the striking engraved features; ⑦ main To the features and technical parameters a Networking inquiry Query whether the motor vehicle inspection and traffic accidents occurred involving not yet processed Road traffic safety violations Line outside inspection Visual inspection ① exterior of the vehicle; ② engine operating conditions; ③ illumination And signal means; ④ safety devices; electrical line ⑤ Road; ⑥ other components Specific inspection items in Appendix C Dynamic Testing ① steering system; ② clutch; ③ transmission; ④ transmission Means; ⑤ braking system Specific test items in Appendix C In-line inspection Vehicle speedometer indication error Only the maximum design speed is greater than 40km/h of the vehicle required B Emissions 1. motorcycles and exhaust emission idle speed. CO, HC volume fraction. 2. accelerator consisting of three car exhaust smoke Method. Value filter type Brake (including wheel weight) Wheel ①; ② the maximum braking force of each wheel; ③ braking force by Long the whole process left and right wheel braking force maximum difference; ④ parking Braking force ③, ④ only three cars and three-wheeled Motorcycle requirements Partial front and rear wheel center plane deviation Only two sides of the vehicle and three moles Car owners care requirements Headlamp ① beam headlamp beam luminous intensity; ② headlamp Light beam irradiation position (around the center of the beam offset, and Vertical offset); ③ headlamp dipped beam irradiation position (Corner vertices cutoff line position) Pair with one headlight of a motor vehicle Only test beam emission beam intensity, the distance Light beam irradiation position to make only a functional object Investigation; other vehicles, the high beam headlamps Beam irradiation position test only applies to far Light beam headlamps can be adjusted individually Check ① a lower frame; fixing electrical lines ②; ③ specific inspection item associated member Appendix C TABLE 2 (cont.) Test mode test items Remarks Road test test A service brake Braking stability and braking distance, level or fully developed Average deceleration, braking stability and braking Coordinated Universal Time Parking brake parking brake performance Usually only test that can not be on the line or lines Have questioned the test results within the three-wheeled motorized Car were a main feature and technical parameters refers to a motor vehicle certified (registered) structure, framework or features, as well as state motor vehicle department in charge of product announcements Data (see Appendix A). B local implementation of environmental inspection marks, emissions (exhaust pollutants measurement) is no longer included in the safety inspection. 5 inspection process and the basic requirements of the motor vehicle inspection 5.1 Inspection Process Motor vehicle safety inspection inspection process shown in Figure 1, motor vehicle safety inspection mechanism stream shown in FIG. 1 according to their Cheng properly adjusted. 1 Safety motor vehicle inspection flowchart of FIG. 5.2 Basic requirements for submission of a motor vehicle 5.2.1 The vehicle inspection should be clean, no oil spills, leaks, air leaks, good tires, tire pressure and tread pattern of the normal is no different It was to be normal engine idle. Fail to meet the basic requirements of the above submission motor vehicles, motor vehicle safety inspection agency should require rectification breaks Meets the requirement after the safety and technical inspection. 5.2.2 When the car inspection, inspection shall provide for inspection of motor vehicles and motor vehicle license valid third party liability insurance of motor vehicles Credentials, can not provide the above documents, certificate of inspection vehicles, motor vehicle safety inspection agency should be the safety and technical inspection. 6 recognized the uniqueness of the vehicle Inspection vehicles should be parked at the specified location, an engine stall. Uniqueness of the vehicle work to identify the main technical features and parameters should be determined in conjunction with visual inspection vehicle and vehicle chassis for inspection. Check When the investigation tools and equipment used are. the length of the measurement tool (steel tape, steel ruler, etc.), plumb, and the lighting fixture weighing equipment. 6.1 Registration Inspection 6.1.1 Test items and requirements It should be checked one by one motor vehicle inspection type, brand/model, color, VIN (vehicle or the model and serial number) and hair Motivation number, vehicle identification main technical features and parameters (Appendix A), on the truck (including three cars, trucks low speed, the same below) should be measured After the count suspended, motor vehicle having a traction function should also measure the specific power to verify compliance and other motor vehicles GB 7258 National Safety Technical Standard And quasi-certification and vehicle factory-made motor vehicles, motor vehicle imports in the import certificate and other evidence, records and documents of the vehicle product label Yung consistent. Of trucks, trailers, passenger cars grew up in application gauges measuring parameters related to the size of 6m, for trucks, trailers weighing applications also set Preparation of relevant quality parameters measured. At the same time, the film should be checked rubbing vehicle identification number (serial number or the vehicle), the vehicle identification number check (Or the vehicle serial number), whether the engine number is changed chisel suspects. 6.1.2 abnormal situation handling 6.1.2.1 found to have been suspected of stealing the vehicle inspection [such as vehicle identification number (or the vehicle model and serial number), the engine number chisel Change, Wabu, sanding trace or pad, without further play an abnormal situation such as carved or vehicle identification number (or the vehicle model and serial number), issued When motivation numbers and relevant evidence, documented evidence inconsistent] or suspected illegal assembly, the safety inspection is terminated, motor vehicle safety Inspection agencies and inspectors should be detailed information about the registration of motor vehicle inspection and immediately report to the police authorities, waiting for the relevant Department to verify the investigation. 6.1.2.2 found outside dimensions inspection vehicle rear suspension and trim, the main features of the core set, and other than power and technical parameters, technology refers to GB 7258 time scale does not comply with technical standards for motor vehicles and other national security or inconsistent with the announcement of data, termination of the safety inspection, machine EMU safety and technical inspection agencies and inspectors should be detailed inspection of the motor vehicle registration vehicle type, brand/model, vehicle identification number (or whole Car model and serial number), engine number, vehicle manufacturer, date of manufacture, batch announcement (except for imported vehicles) and other information, and as soon as possible Report to the local public security organs traffic management and quality and technology supervision department. 6.2 In the test car 6.2.1 Test items and requirements Should be checked one by one inspection vehicle license plate number, vehicle type, brand/model, color, VIN (vehicle model and factory or Number) and engine number, verify that the contents described in the submission of a motor vehicle motor vehicle license agreement and other relevant informa...... ......

BASIC DATA
Standard ID GB 21861-2014 (GB21861-2014)
Description (Translated English) Items and methods of power-driven vehicles safety technology inspection
Sector / Industry National Standard
Classification of Chinese Standard R80
Classification of International Standard 43.180
Word Count Estimation 44,438
Date of Issue 2014/12/12
Date of Implementation 2015/3/1
Older Standard (superseded by this standard) GB 21861-2008
Quoted Standard GB 1589; GB/T 3730.2; GB/T 3730.3; GB 4785; GB 7258-2012; GB 11567.1; GB 11567.2; GB 13094; GB 13392; GB 16735; GB/T 17676; GB 18564.1; GB 18986; GB/T 19056; GB 19151; GB 20300; GB 24315; GB 24407; GB 25990; GB/T 26765; GA 36; GA 802; GA 804; GA 1186
Drafting Organization Ministry of Public Security Traffic Management Science Institute
Administrative Organization Ministry of public security traffic management Standardization Technical Committee
Regulation (derived from) National Standards Bulletin 2014 No. 30
Proposing organization Ministry of Public Security of the People's Republic of China
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the motor vehicle safety inspection of test items, test methods, inspection requirements and test results for disposal. This Standard applies to motor vehicle safety inspection agency for motor vehicle safety and technical inspecti

BASIC DATA
Standard ID GB 21861-2008 (GB21861-2008)
Description (Translated English) Items and methods of power-driven vehicles safety technology inspection
Sector / Industry National Standard
Classification of Chinese Standard R80
Classification of International Standard 43.180
Word Count Estimation 40,417
Date of Issue 2008-05-26
Date of Implementation 2009-06-01
Quoted Standard GB 7258
Drafting Organization Ministry of Public Security Traffic Management Research Institute
Administrative Organization Ministry of Public Security Traffic Management Standardization Technical Committee
Regulation (derived from) Announcement of Newly Approved National Standards 2008 No. 9 (No. 122 overall)
Proposing organization People's Republic of China Ministry of Public Security
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This Chinese standard specifies the motor vehicle safety inspection test items and test methods and other requirements. This standard applies to motor vehicle safety and technical inspection of roads in safety and technical inspection of motor vehicles, this standard also applies to export vehicle inspection agency to entry vehicle safety and technical inspection. On the approval of relevant departments of the actual road test vehicle safety and technical inspection, you can refer to this standard.