Powered by Google www.ChineseStandard.net Database: 189759 (19 May 2024)

GB 17509-2008 related PDF English

GB 17509-2008 (GB17509-2008) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB 17509-2008English85 Add to Cart 0-9 seconds. Auto delivery. Photometric characteristics of direction indicators for motor vehicles and their trailers GB 17509-2008 Valid GB 17509-2008
GB 17509-1998English359 Add to Cart 3 days Photometric characteristics of direction indicators for motor vehicles and their trailers GB 17509-1998 Obsolete GB 17509-1998



Preview PDF: GB 17509-2008

GB 17509-2008: PDF in English
GB 17509-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.20
T 38
Replacing GB 17509-1998
Photometric Characteristics of Direction
Indicators for Motor Vehicles and Their Trailers
ISSUED ON. DECEMBER 31, 2008
IMPLEMENTED ON. JANUARY 1, 2008
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative References ... 5 
3 Terms and Definitions ... 5 
4 Classification ... 5 
6 Specifications ... 9 
7 Test Procedure ... 12 
8 Inspection Rules ... 14 
Foreword
All the technical content of this Standard is mandatory.
This Standard corresponds to United Nations Economic Commission for Europe ECE
R6 Rev.3 Amend.5 “Uniform Provisions Concerning the Approval of Direction
Indicators for Power-driven Vehicles and Their Trailers”. This Standard is not
equivalent to ECE R6 Rev.3 Amend.5, with the main differences as follows.
-- it deletes the administrative articles;
-- it deletes the Annex “Minimum requirements for conformity of production control
procedures”;
-- it deletes the Annex “minimum requirements for sampling by an inspector”; and
-- it adds the inspection rules.
The main technical specifications are the same as ECE R6 Rev.3 Amend.5, such as
general specifications, photometric performance, light colour, test procedures.
This Standard replaces GB 17509-1998 “Uniform Provisions Concerning the Approval
of Direction Indicators for Power-driven Vehicles and Their Trailers”. Compared with
the previous edition, the main changes are as follows.
-- it modifies Chapter 2 “Normative References” of the previous edition;
-- it modifies Chapter 3 “Terms and Classification” of the previous edition, which is
changed into Chapter 3 “Terms and Definitions” and Chapter 4 “Classification”;
-- it modifies Chapter 4 “Photometric Characteristics” of the previous edition, which
is changed into Chapter 6 “Specifications” of this edition;
-- it deletes Chapter 5 “Provisions on Lamps” of the previous edition and the relevant
content added is included in Chapter 6 “Specifications” of this edition;
-- it modifies Chapter 6 “Photometric Measurement Method” of the previous edition,
which is changed into Chapter 7 “Test Procedure” of this edition;
-- it deletes Chapter 7 “Chromatic Measurement Method” of the previous edition and
the relevant content added is included in Chapter 6 “Specifications” and Chapter
7 “Test Procedure” of this edition;
-- it modifies Chapter 8 “Inspection Provisions” of the previous edition, which is
changed into Chapter 8 “Inspection Rules” of this edition;
-- it adds the content related to light source module(s);
-- it adds the test requirements of flash lighting;
Photometric Characteristics of Direction Indicators for
Motor Vehicles and Their Trailers
1 Scope
This Standard specifies the technical specifications, test methods and inspection rules
of photometric performance of direction indicators for motor vehicles and their trailers.
This Standard applies to all types of direction indicators for vehicles of categories M,
N and O.
In this Standard, the above-mentioned direction indicators are also called devices.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB 4599 Motor Vehicle Headlamps Equipped with Filament Lamps
GB 4785 Prescription for Installation of the External Lighting and Light-Signalling
Devices for Motor Vehicles and Their Trailers
GB 15766.1 Lamps for Road Vehicles - Dimensional Electrical and Luminous
Specifications (GB 15766.1-2000 idt IEC 60809.1995)
ECE R37 Uniform Provisions Concerning the Approval of Filament Lamps for Use
in Approved Lamp Units of Power-Driven Vehicles and of Their Trailers
3 Terms and Definitions
For the purpose of this Standard, the terms and definitions given in GB 4785 apply.
4 Classification
4.1 Categories of direction indicators
Front fog lamps which differ in such essential respects as.
a) the trade name or mark;
b) the characteristics of the optical system (levels of illuminous intensity, light
distribution angles, category of filament lamps and light source modules, etc.);
c) the category of devices.
However, a change of the colour of the filament lamps or the colour of any filter does
not constitute a change of type.
6 Specifications
6.1 The devices shall be so designed and constructed that under normal conditions
of use and notwithstanding the vibrations to which they may be subjected in such use,
their satisfactory operation remains assured and they retain the characteristics
prescribed by this Standard.
6.2 The colour of the light emitted inside the field of the light distribution grid defined
in Figure 2 shall be amber and its colorimetric characteristics shall meet the
requirements of GB 4785. Outside this field, no sharp variation of colour shall be
observed.
6.3 The devices equipped with replaceable light sources shall be equipped with
filament lamps meeting the specifications of GB 15766.1 or ECE R37.
6.4 The light source modules used shall be so designed that even if in the dark, they
can be installed at the correct positions; and that they can prevent maloperation.
6.5 Photometric performance
6.5.1 See Figure 2 for the requirements for light distribution. The numbers at the
intersections of grid lines in Figure 2 indicate the minimum values of luminous intensity
in the direction and the reference axis direction [categories 1, 1a, 1b, 2a, 2b, 3 and 4
(forward)] or the ratios of the minimum values of luminous intensity of direction A
(category 6), direction A meaning the direction H = 5° and V = 0°.
6.5.2 The luminous intensity of all categories of devices in the reference axis direction
or A direction shall meet the specifications of Table 1.
7.2 The limits of the apparent surface in the direction of the reference axis of a
direction indicator shall be determined.
7.3 Photometric test voltage
7.3.1 In the case of replaceable filament lamps, the filament lamps of corresponding
categories shall be operated for photometric performance measurement at reference
luminous flux during on time.
7.3.2 In the case of non-replaceable light sources all measurements shall be made
at 6.75 V, 13.5 V or 28.0 V.
7.3.3 For the devices requiring a special power supply, the manufacturer shall
provide the special power supply for such light source. And they shall be measured
under the voltage specified by the manufacturer.
7.3.4 For devices of category 2b which obtains luminous intensity by night with an
additional device, the voltage applied to the additional device for the measurement of
luminous intensity by night shall be equal to the voltage applied to the lamp for the
measurement of luminous intensity by day.
7.4 Before photometric performance measurement, the light source shall be lit at the
voltage of measurement, to make its photometric performance become stable.
7.5 However, depending on the construction of the device, for example, the use of
light-emitting diodes (LED), or the need to take precautions to avoid overheating, it is
allowed to measure the lamps in flashing mode.
7.5.1 This shall be achieved by switching with a frequency of f = 1.5 ± 0.5 Hz with the
pulse width greater than 0.3 s, measured at 95 per cent peak light intensity.
7.5.2 In the case of replaceable filament lamps, the filament lamps shall be operated
at reference luminous flux during on time. In all other cases the voltage as required in
6.3 below shall be switched with a rise time and fall time shorter than 0.01 s.
7.5.3 In the case of measurements taken in flashing mode the reported luminous
intensity shall be represented by the maximum intensity.
7.6 Photometric performance measurement of all categories of devices.
7.6.1 For lamps equipped with non-replaceable light sources, the photometric
characteristics should be verified with the light sources present in the lamp.
7.6.2 When several filament lamps are used, it is allowed to use filament lamps
mass-produced to conduct measurement at the voltages 6.75 V, 13.5 V or 28.0 V, and
the luminous intensity values produced shall be corrected. For filament lamps, the
correction factor is the ratio between the reference luminous flux as specified in 6.3
and the mean value of the luminous flux found at the voltage applied (6.75 V, 13.5 V
or 28.0 V). The actual luminous fluxes of light source used shall not deviate more than
8.3.1 The manufacturer shall provide.
a) Drawings, in triplicate, sufficiently detailed to permit identific...
......

BASIC DATA
Standard ID GB 17509-2008 (GB17509-2008)
Description (Translated English) Photometric characteristics of direction indicators for motor vehicles and their trailers
Sector / Industry National Standard
Classification of Chinese Standard T38
Classification of International Standard 43.040.20
Word Count Estimation 9,958
Date of Issue 2008-12-31
Date of Implementation 2010-01-01
Older Standard (superseded by this standard) GB 17509-1998
Quoted Standard GB 4599; GB 4785; GB 15766.1; ECE R37
Adopted Standard ECE R6 Rev3 Amend5, NEQ
Drafting Organization Shanghai Institute of Automotive Lighting
Administrative Organization National Automotive Standardization Technical Committee
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Proposing organization National Development and Reform Commission
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This Chinese standard specifies the car and trailer turn signal lamp photometric characteristics of the technical requirements, test methods and inspection rules. This standard applies to M, N and O type of vehicle used for various types of turn signals. This standard, also known as the turn signal device.