GB 10409-2019 (GB10409-2019) & related versions
GB 10409-2019: PDF in English
GB 10409‐2001
GB
ICS 13.310
A 91
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Burglary resistant safes
ISSUED ON. OCTOBER 24, 2001
IMPLEMENTED ON. APRIL 01, 2002
Issued by.
General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Definitions ... 5
4 Product classification and marking ... 6
5 Technical requirements ... 8
6 Test methods ... 12
7 Inspection rules ... 17
8 Marks, packaging, transportation and storage... 20
Foreword
All technical contents in this Standard are mandatory.
This Standard is the revision of GB 10409-1989.
This Standard no longer specify that the burglary resistant safes must be installed with warning unit. It
classifies the safety performance of the burglary resistant safes. It does not divide the products into
qualified product, first-class products and superior products. The contents of technical requirements and
test methods of previous version have been detailed and supplemented, such as. Class A products in
the previous version were subdivided into Class A1 and Class A2; Class B products were subdivided
into Class B1, B2 and B3. It respectively specifies the gaps between cabinet door and door frame,
according to the height of cabinet. For the code-volume of the electronic lock, add the requirements of
“arbitrarily-variable code”; and requirements and test methods of “anti-electromagnetic interference”.
Add the “Inspection Item Table”, etc.
This Standard will replace GB 10409-1989, from its implementation date.
This Standard was proposed by the Ministry of Public Security of the People’s Republic of China.
This standard shall be under the jurisdiction of Standardization Technical Committee for Security ＆
Protection Alarm Systems of China.
This Standard was jointly drafted by. Shanghai Diebold King Safe Co., Ltd, Product Quality Supervision,
Inspection and Test Center for Security & Protection Alarm Systems of Ministry of Public Security, and
China Security & Protection Product Industry Association Secretariat.
The main drafters of this Standard. Xu Zhiwei, Mou Xiaosheng, Jiang Changhong, Lu Zhongfa and Gu
Juxing.
This Standard was first-time published in 1989.
National Standard of the People’s Republic of China
Burglary resistant safes
Replacing GB 10409-1989
1 Scope
This Standard specifies the classification, technical requirements, test methods inspection rules and
marks, packaging, transportation, and storage of burglary resistant safes.
This Standard applies to the production and inspection of burglary resistant safes. It also applies to the
burglary resistant safes that is attached with functions such as alarm, fire protection, and/or remote
control.
2 Normative references
The articles contained in the following documents have become part of this Standard when they are
quoted herein. For the dated documents so quoted, all the modifications or revisions made thereafter
shall not be applicable to this Standard. For the undated documents so quoted, the latest editions shall
be applicable to this Standard.
GB/T 1720-1979 Method of test for adhesion of paint films
GB/T 6461-1986 Metallic coatings - Coatings cathodic to the substrate - Rating of electro-plated
test specimens subjected to corrosion tests
GB/T 10125-1997 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 12335-1990 Metallic coatings - Coatings anodic to the substrate - Rating of test specimens
subjected to corrosion
GB/T 15211-1994 Environmental testing for alarm systems
GB/T 15482-1995 Single sampling procedures and tables for product quality audit of small
population by attributes
GB/T 17626.2-1998 Electromagnetic compatibility - Testing and measurement techniques -
Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility - Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility - Testing and measurement techniques –
Electrical fast transient/burst immunity test
GB/T 17626.5-1999 Electromagnetic compatibility - Testing and measurement techniques - Surge
immunity test
GB/T 17626.11-1999 Electromagnetic compatibility Testing and measurement techniques Voltage
dips, short interruptions and voltage variations immunity tests
GA/T 73-1994 Thief resistant machine lock
3 Definitions
For the purpose of this standard, the following terms and definitions shall apply.
3.1 Burglary resistant safes
It refers to a kind of safes that is equipped with mechanical and electronic lock (including combination
lock, IC card lock, etc.) which can be used to resist abnormal entry under specified conditions within the
required time.
3.2 Safety class
The classification of anti-destruction capacity that the burglary resistant safes can withstand. The
classification is divided based on the duration of net working time that the burglary resistant safes can
resist to the abnormal entry, under the action of the specified destroying tools.
3.3 Entry
During the destruction resistant test, open the cabinet door of various burglary resistant safes or make
an opening not smaller than the specified area on the cabinet door or body, within the specified net
working time. Class A burglary resistant safes is 38cm2; Class B and Class C burglary resistant safes are
13cm2.
3.4 Common hand tools
Including the chisel, punch, wedge, screwdriver, hacksaw, wrench, pliers, hammer with the of weight not
more than 3.6kg, the prying tools with the length of not more than 1.5m, and general digging tools.
3.5 Portable electric tools
The electric hand drills with the bit diameter of not more than 12.5mm, the electric hammer drills with the
punch diameter of not more than 25mm and the pressure devices.
3.6 Grinding point
The grinding tools with shapes such as cone, disk, or cylinder that is driven by die grinders with the
rotate speed of 14000 r/min-22000 r/min.
The mechanical lock used in the burglary resistant safes shall comply with the requirements of GA/T 73.
5.4 Electronic lock (including IC card lock, electronic combination lock, etc.)
5.4.1 The coded number of the electronic combination lock shall not be less than 106. And the password
can be changed arbitrarily.
5.4.2 If the password is entered by key buttons, the key buttons shall not occur any failure in 6000
continuous pressing actions.
5.4.3 When the electronic combination lock are knocked by the energy of not more than 0.5J, the
mis-operation and damage phenomena shall be avoided.
5.4.4 The electronic combination lock shall have emergency opening function. And it may have multilevel
and multi-group opening passwords.
5.4.5 The password entrance of electronic combination lock shall be prompted. When it is continuously
entered with wrong password for three times or mis-operation, the electronic combination lock shall have
time-limited locking, alarm and other functions. However, after the time-limited locking and alarm, it shall
recover the correct operation and operate normally.
5.4.6 When the supply voltage of the electronic lock changes within the range of 85%-110% of the rated
voltage, the electronic lock shall be able to work normally. When the power voltage is below the specified
alarm voltage, it shall have under-voltage alarm indications. After under-voltage alarm, the power
capacity shall still meet more than 240 times of normal opening and closing of electronic lock.
5.4.7 The electronic lock shall be equipped with external power interface or emergency opening unit.
5.4.8 For the burglary resistant safes adopting electronic lock, the key parts of electronic lock shall be
protected. When the keyboard, wire, electromechanical actuators are destroyed and attacked, they shall
be able to withstand the destruction resistant test for corresponding classes of burglary resistant safes.
5.4.9 The environmental suitability of electronic lock shall comply with the requirements of A-1/2; A-2/5;
A-3/3; A-4/1; A-6/3; and A-18/3 in GB /T15211-1994.
5.4.10 The immunity requirements of the electronic lock shall meet the test requirements specified in
GB/T 17626.2 (Grade 1), GB/T 17626.3 (Grade 1), GB/T 17626.4 (Grade 1), GB/T 17626.5 (Grade 1)
and GB/T 17626.11 (Class 40, duration of 5 cycles).
5.5 Power supply
5.5.1 The power supply’s power, energy consumption, environmental adaptability and safety
requirements shall satisfy the corresponding product technical requirements.
5.5.2 When the AC 220V power supply is used as the main power supply, there shall have a standby
power (a rechargeable battery or primary battery). It works normally within the range of 85%-110% of
rated voltage of the main power supply. And there shall have an overcurrent protecti...
......
| Standard ID | GB 10409-2019 (GB10409-2019) | | Description (Translated English) | Burglary-resistant safes | | Sector / Industry | National Standard | | Classification of Chinese Standard | A91 | | Classification of International Standard | 13.310 | | Word Count Estimation | 26,242 | | Date of Issue | 2019-04-04 | | Date of Implementation | 2020-05-01 | | Drafting Organization | Shanghai Dibao Security Equipment Co., Ltd., National Security and Alarm System Product Quality Supervision and Inspection Center (Shanghai), the Third Research Institute of the Ministry of Public Security, National Security and Alarm System Product Quality Supervision and Inspection Center (Beijing), Ningbo Yongfa Intelligent Security Technology Co., Ltd. Company, Nanjing Dongwu Electric Co., Ltd., Shanghai Jiebao Dawang Enterprise Development Co., Ltd., Ningbo Zhenhai Shenzhou Lock Industry Co., Ltd., Shanghai Fortress Industrial Co., Ltd., Ningbo Shuangjiu Container Co., Ltd., Ningbo Aipu Industrial Co., Ltd., Guangzhou Radio and Television Express Financial Electronics Co., Ltd., Shenzhen Yihua Computer Co., Ltd., Zhejiang Guangna Industry and Trade Co., Ltd. | | Administrative Organization | Ministry of Public Security of the People's Republic of China | | Proposing organization | Ministry of Public Security of the People's Republic of China | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
|