FZ/T 73043-2020 (FZ/T73043-2020, FZT 73043-2020, FZT73043-2020) & related versions
Buy with any currencies (Euro, JPY, KRW...): FZ/T 73043-2020 Preview this PDF: FZ/T 73043-2020
FZ/T 73043-2020
FZ
TEXTILE INDUSTRY STANDARD OF
THE PEOPLE'S REPUBLIC OF CHINA
ICS 59.080.30
W 63
Replacing FZ/T 73043-2012
Knitted shirts
针 织 衬 衫
ISSUED ON. DECEMBER 9, 2020
IMPLEMENTED ON. APRIL 1, 2021
Issued by. Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Product sizes... 7
4 Requirements... 7
5 Inspection rules... 12
6 Judgment rules... 16
7 Product instructions, packaging, transportation and storage... 17
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 73043-2012 Knitted shirts. Compared with FZ/T 73043-
2012, the main technical changes are as follows.
-- The scope of the standard is modified to clarify that it does not apply to shirts
containing fillings or products for infants and young children aged 36 months
or below (see Chapter 1; see Chapter 1 of the 2012 edition);
-- The assessment indicators such as dimensional change rate after dry cleaning,
color fastness to dry cleaning, and appearance quality after washing are added,
and the content that shirts worn by children aged older than 36 months and no
older than 14 years shall also comply with the relevant provisions of GB 31701
is added (see 4.2; see 4.2 of the 2012 edition);
-- The assessment requirements for fiber content, dimensional change rate after
washing (dry cleaning), pilling, crinkling degree of all-wool products after
washing, and color fastness to light and perspiration are modified (see 4.2; see
4.2 of the 2012 edition);
-- The separate classification of the assessment indicators of color fastness to
soaping and rubbing of printed (hot stamping) products is deleted (see 4.2.1; see
4.2.1 of the 2012 edition);
-- The specification deviation and measurement regulations on the clothes length
are modified, the specification deviation requirements for the neckline of
superior products are modified, and the specification tolerance of the length of
short sleeves is added (see Table 3 and Table 6; see Table 3 and Table 4 of the
2012 edition);
-- The intrinsic quality inspection conditions are modified (see 5.4; see 5.3 of the
2012 edition);
-- The test method for the distortion rate after washing is modified (see 5.5.7; see
5.4.7 of the 2012 edition);
-- The test method for color fastness to dry cleaning is added (see 5.5.14);
-- The test method for color fastness to transfer in joints is modified, and the
original Appendix A is deleted (see 5.5.17; see 5.4.16 and Appendix A of the
2012 edition);
-- The test method for appearance quality after washing is added (see 5.5.18);
Knitted shirts
1 Scope
This standard specifies the product sizes, requirements, inspection rules, judgment rules
and product instructions, packaging, transportation and storage of knitted shirts.
This standard applies to knitted shirts made of knitted fabrics as the main material.
This standard does not apply to shirts containing fillings or products for infants and
young children aged 36 months and below.
2 Normative references
The following documents are essential for the application of this document. For
referenced documents with dates, only the versions corresponding to the dates are
applicable to this document; for referenced documents without dates, the latest versions
(including all amendments) are applicable to this document.
GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in
colour
GB/T 1335(all parts) Standard sizing systems for garments
GB/T 2910(all parts) Textiles - Quantitative chemical analysis
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1.Free and
hydrolyzed formaldehyde (water extraction method)
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing
GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing
with soap or soap and soda
GB/T 3922 Textiles - Tests for colour fastness - Colour fastness to perspiration
GB/T 4802.1-2008 Textiles - Determination of fabric propensity for fuzzing and
pilling - Part 1.Circular locus method
GB/T 4856 Package of cotton goods and knitwear
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4.Textiles
and apparel
GB/T 5711 Textiles - Tests for colour fastness - Colour fastness to drycleaning
using perchloroethylene solvent
GB/T 5713 Textiles - Tests for colour fastness - Colour fastness to water
GB/T 6411 A series of size of knitted underwear
GB/T 7573 Textiles - Determination of pH of aqueous extract
GB/T 8427-2019 Textiles－Tests for color fastness－Color fastness to artificial
light. Xenon arc
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile
testing
GB/T 8878 Knitted underwear
GB/T 14576 Textiles - Tests for colour fastness - Colour fastness to light of textiles
wetted with artificial perspiration
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 16988 Quantitative determination for mixtures of special animal fibre and
wool
GB/T 17592 Textiles - Determination of the banned azo colourants
GB 18401 National general safety technical code for textile products
GB/T 19976-2005 Textiles - Determination of bursting strength - Steel ball method
GB/T 23319.3-2010 Textiles - Determination of spirality after laundering - Part 3.
Woven and knitted garments
GB/T 29862 Textiles - Identification of fiber content
GB/T 31127-2014 Textiles - Tests for colour fastness - Colour fastness to transfer
in joints
GB 31701 Safety technical code for infants and children textile products
FZ/T 01026 Textiles - Quantitative chemical analysis - Multinary fibre mixtures
FZ/T 01057(all parts) Test method for identification of textile fibers
FZ/T 80007.3 Dry wash resistance test method for garments used adhesive
interlining
5.4 Intrinsic quality inspection conditions
5.4.1 The specimens taken shall not have defects that may affect the test results.
5.4.2 The specimens shall be taken from different parts of the product.
5.5 Intrinsic quality test methods
5.5.1 Fiber content test
It shall be implemented in accordance with the provisions of GB/T 2910(all parts), FZ/T
01057(all parts), FZ/T 01026, GB/T 16988 and GB/T 29862.
5.5.2 Formaldehyde content test
It shall be implemented in accordance with the provisions of GB/T 2912.1.
5.5.3 pH test
It shall be implemented in accordance with the provisions of GB/T 7573.
5.5.4 Odor test
It shall be implemented in accordance with the provisions of GB 18401.
5.5.5 Test for degradable carcinogenic aromatic amine dyes
It shall be implemented in accordance with the provisions of GB/T 17592.
5.5.6 Dimensional change test after washing (dry cleaning)
5.5.6.1 Marking and measuring parts
Test the neckline, 1/2 bust, and clothes length according to 4.3.2.For round-sleeved
garments, the calculation of clothes length is based on the average value of the
measured lengths at four positions on the left and right sides of the front and the back;
for raglan-sleeved garments, the clothes length is measured only from the midpoint of
the back neck to the hem. Mark the measurement to facilitate measurement after
washing.
5.5.6.2 Washing and drying test
The test for the dimensional change rate after washing shall be carried out in accordance
with the provisions of GB/T 8629-2017, using the 4N program of the A-type standard
washing machine, the detergent selected is "standard detergent 3", and the drying
program is hanging to dry. Use a rod to pass through the two sleeves to keep the bust at
the armhole straight, and separate and flatten the two pieces by hand from the bottom.
The dried specimens are placed horizontally at a temperature of (20±2) ℃ and relative
humidity of (65±4)% and conditioned for no less than 4 hours, and the creases are gently
patted flat before measurement. The number of test pieces is 3.If there are both
shrinkage and elongation test results, the average value of the two shrinkage (or
elongation) specimens is taken as the test result.
The dimensional change rate after dry cleaning is tested according to FZ/T 80007.3.
The number of test pieces is 1, and the measurement and calculation are carried out
according to the test method for the dimensional change rate after washing.
5.5.7 Test for the distortion rate after washing
Lay the garments after washing on a smooth surface, flatten them gently with hands,
and measure them according to method B specified in GB/T 23319.3-2010.Measure
the side with the largest distortion for each product, and take the average distortion rate
of the three pieces as the calculation result.
5.5.8 Bursting strength test
It shall be implemented according to the provisions of GB/T 19976-2005; the diameter
of the steel ball is (38±0.02) mm.
5.5.9 Pilling test
It shall be implemented in accordance with the provisions of Method E in GB/T 4802.1-
2008, and the rating shall be based on GSB 16-1523 Photos of pilling on knitted fabrics.
5.5.10 Test for color fastness to light and perspiration
It shall be implemented in accordance with the provisions of GB/T 14576.
5.5.11 Test for color fastness to light
It shall be implemented in accordance with the provisions of method 3 in GB/T 8427-
2019.
5.5.12 Test for color fastness to water
It shall be implemented in accordance with the provisions of GB/T 5713.
5.5.13 Test for color fastness to soaping
The test shall be carried out in accordance with GB/T 3921-2008 and the test conditions
shall be carried out in accordance with A(1).
5.5.14 Test for color fastness to dry cleaning
It shall be implemented in accordance with the provisions of GB/T 5711.
5.5.15 Test for color fastness to perspiration
It shall be implemented in accordance with the provisions of GB/T 3922.
5.5.16 Test for color fastness to rubbing
It shall be implemented in accordance with the provisions of GB/T 3920, and the test is
only carried out in the longitudinal direction.
5.5.17 Test for color fastness to transfer in joints
It shall be implemented in accordance with the provisions of Method A in GB/T 31127-
2014.
5.5.18 Test for appearance quality after washing
Washing and drying shall be implemented according to the test method for dimensional
change rare after washing specified in this standard, and then the evaluation is carried
out according to Table 1; the crinkle degree of the collar, sleeve, top fly and side seam
after washing is rated according to GSB 16-3605; the color change after washing is
rated using the grey scale specified in GB/T 250.
6 Judgment rules
6.1 Batch determination
6.1.1 Intrinsic quality
If any one of the internal quality items does not meet the requirements, the batch of
products will be deemed unqualified. Among them, if the color fastness item does not
meet the requirements, the batch of products will be deemed unqualified by color. For
the test for appearance quality after washing, if at least two or more pieces meet the
requirements, the batch of products will be deemed qualified, and if not, the batch of
products will be deemed unqualified.
6.1.2 Appearance quality
For the appearance quality, the non-conforming product rate is calculated by the type
and color. If the non-conforming product rate is within 5.0%, the batch of products is
considered qualified; if the non-conforming product rate exceeds 5.0%, the batch of
products is considered unqualified.
6.1.3 Result determination
If the products are qualified according to 6.1.1 and 6.1.2, then the batch of products is
qualified.
......
FZ/T 73043-2012
Knitted shirts
ICS 59.080.30
W63
People's Republic of China textile industry standards
Knit shirts
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Technical Committee textile knitwear (SAC/TC209/SC6) centralized.
Drafting of this standard. Ningbo Fiber Testing, seven wolves in Fujian Industrial Co., Ltd. joeone,
Zhejiang Dragon Prince Garments Co., Ltd., the National Quality Supervision and Inspection Center knitted products, Zhejiang Baoxiniao clothing Co., Hengyuan
Xiang (Group) Co., Ltd., Qingdao namely Group Co., Ltd., Zhejiang clockwise Clothing Co., country clothing of Quality Supervision, Inspection
Test center (Tianjin).
The main drafters of this standard. Jinmei Ju, Guo Yali, Tony Lin, Liang Ming, Xing Zhigui, Guohua, Qiu Hongsheng, Kongxiang Juan, Gongyi Hui,
Tangxiang Tao, Shi Dongliang.
Knit shirts
1 Scope
This standard specifies the product number type knit shirts, requirements, inspection rules, decision rules, product description, packaging, transport and storage.
This standard applies to identify the quality of knitted fabrics made of the main material of knit shirt.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 251 Textiles Tests for color fastness - Grey scale for assessing staining card
GB/T 1335 (all parts) type of clothes
GB/T 2910 (all parts) Textiles - Quantitative chemical analysis
GB/2912.1 T Textiles - Determination of formaldehyde - Part 1. Free and hydrolyzed formaldehyde (water extraction method)
GB/T 3920 Textiles Tests for color fastness rubbing fastness
GB/T 3921-2008 Textiles Tests for color fastness Colour fastness to soaping
Test method for color fastness to perspiration GB/T 3922 Textiles resistance
GB/T 4802.1-2008 Textiles pilling ball measured properties - Part 1. Circular locus method
GB/T 4856 Knitwear Packaging
GB 5296.4 consumer use of textiles and apparel
GB/T 5713 Textiles Tests for color fastness Colour fastness to water
GB/T 6411 series of knitted underwear Size
Determination of GB/T 7573 Textiles pH value of the aqueous extract
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 8427-2008 Textiles Tests for color fastness Colour fastness to artificial light. Xenon arc
GB/T 8629-2001 Textiles - Domestic washing and drying test procedures
GB/T 8878 Cotton knitted underwear
GB/T 14576 Textiles Tests for color fastness perspiration color fastness to light
GB/T 14801 woven and knitted skew and bowing Test Method
GB/T 17592 Determination of azo dyes in textile disabled
GB 18401 National Safety Technical Code for Textile Products
GB/T 19976-2005 Textiles - Determination of bursting strength steel ball method
Determination of GB/T 23344 Textiles 4-amino azobenzene
FZ/T 01026 Textiles - Quantitative chemical analysis of four-component mixture of fibers
Logo FZ/T 01053 textile fiber content
01057 (all parts) FZ/T Test method for identification of textile fibers
Test methods FZ/T 01095 Textiles spandex fiber content
GSB16-1523 knitted fabric pilling sample photos
GSB16-2500 knitted surface defects like color photos
......
| Standard ID | FZ/T 73043-2020 (FZ/T73043-2020) | | Description (Translated English) | (Knitted shirt) | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Word Count Estimation | 11,123 | | Date of Issue | 2020-12-09 | | Date of Implementation | 2021-04-01 | | Older Standard (superseded by this standard) | FZ/T 73043-2012 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No. 48 (2020) | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Standard ID | FZ/T 73043-2012 (FZ/T73043-2012) | | Description (Translated English) | Knitted shirts | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W63 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 13,130 | | Quoted Standard | GB/T 251; GB/T 1335.1; GB/T 1335.2; GB/T 1335.3; GB/T 2910.1; GB/T 2910.2; GB/T 2910.3; GB/T 2910.4; GB/T 2910.5; GB/T 2910.6; GB/T 2910.7; GB/T 2910.8; GB/T 2910.9; GB/T 2910.10; GB/T 2910.11; GB/T 2910.12; GB/T 2910.13; GB/T 2910.14; GB/T 2910.15; GB/T | | Drafting Organization | Ningbo Fibre Inspection | | Administrative Organization | National Standardization Technical Committee Knitwear Textile Technical Committee | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Proposing organization | China Textile Industry Federation | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the type of knitted shirt product number, requirements, inspection rules, decision rules, product description, packaging, transport and storage. This standard applies to knitted fabrics identified as the main material of knitted sh |
|