FZ/T 63001-2014 (FZ/T63001-2014, FZT 63001-2014, FZT63001-2014) & related versions
FZ/T 63001-2014: PDF in English (FZT 63001-2014) FZ/T 63001-2014
Polyester grey yarn for sewing thread
ICS 59.080.20
W12
People's Republic of China textile industry standards
Replacing FZ/T 63001-2006
Sewing polyester yarn qualities
Issued on. 2014-10-14
2015-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard FZ/T 63001-2006 "polyester sewing thread yarn qualities."
This standard FZ/T 63001-2006 compare the main changes are as follows.
--- Standard name has been adjusted, changed to "sewing polyester yarn qualities";
--- Revised Chapter 3 classification will be calculated 100m standards of quality and standards into the dry mass of Appendix C, to remove the linear density
Demand content;
--- Technical requirements, modify the name of part of the project, evenness assessment retain only evenness coefficient of variation;
--- Yarn breaking strength of the coefficient of variation, linear density coefficient of variation, evenness variation coefficient and other indicators have been adjusted, twist factor
Range as the reference value;
--- Cancel indicators along the lower assessment, according to the technical requirements of the products, such as a minimum assessment.
The standard proposed by China Textile Industry Association.
This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized.
This standard was drafted. US-Industry Co., Ltd. Changyi Yang Jinhua Textile Co., Ltd., Fujian Changle mayor Textile Limited
Division Nantong double WONG Textile Co., Ltd. Shanghai textile industry technical supervision, China Textile Industry Association.
The main drafters of this standard. Xide Chang, Song Yuee, Yang Jinhua, Shi Song Wei, Ji Yijun, Wang Yi Jing, Jing Shen whole.
This standard replaces the standards previously issued as follows.
--- FZ/T 63001-1992, FZ/T 63001-2006.
Sewing polyester yarn qualities
1 Scope
This standard specifies the sewing polyester (cotton fiber) yarn qualities product classification, marking, requirements, test methods, inspection rules and standards
Chi, packaging.
This standard applies to the sewing ring with polyester yarn qualities.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 398-2008 cotton yarn qualities
Textile yarn twist 2543.1 Determination of GB/T Part 1. Direct counting method
Textile yarn twist 2543.2 Determination of GB/T Part 2. untwisting twisting method
GB/T 3292.1 Textiles yarn evenness test methods - Part 1. capacitance method
GB/T 3916 Textiles - Yarn single yarn breaking strength and elongation measurement (CRE Act)
GB/Textiles - Determination of the normal density of the yarn skein T 4743-2009
FZ/T 01050 Textile yarn defect grading and inspection methods capacitive
FZ/T 10007 pure cotton and chemical fiber spinning, blended yarn qualities inspection rules
FZ/T 10008 cotton and chemical fiber spinning pure, blended yarn qualities marking and packaging
3 product classification, marking
3.1 sewing polyester yarn qualities in different product line density classification.
3.2 polyester raw material, code-named T.
3.3 sewing labeled with polyester yarn qualities, shall be marked with the code before the yarn feed line density.
Example. The sewing polyester yarn having a linear density of 18.5tex, should be written as. T18.5tex.
4 Requirements
4.1 Project
4.1.1 The sewing yarn of polyester yarn technical requirements include breaking strength coefficient of variation, variation coefficient of linear density, yarn breaking strength, linear density
Deviation rate, evenness coefficient of variation, one hundred thousand meters of yarn faults, twist coefficient of variation of seven indicators.
4.1.2 qualities of polyester sewing thread technical requirements include singlet breaking strength coefficient of variation, linear density coefficient of variation, in-line breaking strength, linear density
Deviation rate, one hundred thousand meters of yarn faults, twist coefficient of variation of six indicators.
4.2 Grading
4.2.1 of the same material, the same single continuous production process of the same specifications as one or several test batches. According to the prescribed test
Test methods, evaluation of results in accordance with its sewing polyester yarn qualities of goods.
......
Standard ID | FZ/T 63001-2014 (FZ/T63001-2014) | Description (Translated English) | Polyester grey yarn for sewing thread | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | Classification of Chinese Standard | W12 | Classification of International Standard | 59.080.20 | Word Count Estimation | 12,189 | Date of Issue | 2014/10/14 | Date of Implementation | 2015/4/1 | Older Standard (superseded by this standard) | FZ/T 63001-2006 | Quoted Standard | GB/T 398-2008; GB/T 2543.2; GB/T 3292.1; GB/T 3916; GB/T 4743-2009; FZ/T 01050; FZ/T 10007; FZ/T 10008; GB/T 2543.1 | Drafting Organization | Huamei Thread Co., Ltd. | Administrative Organization | National Standardization Technical Committee of textile printing and dyeing textiles Technical Committee | Regulation (derived from) | People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) | Proposing organization | China Textile Industry Federation | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | Summary | This Standard specifies the sewing polyester (cotton fiber) yarn qualities product classification, marking, requirements, test methods, inspection rules and signs, packaging. This Standard applies to ring-spun polyester sewing yarn qualities. |
|