Chinese standards (related to): 'CQC-C1201-2015'
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Google Book |
| CQC-C1201-2015 | English | 330 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Mandatory product certification Implementation detail rules -- Motor vehicle tires
|
CQC-C1201-2015
| |
CQC-C1201-2015
|
| CQC-C1201-2014 | English | RFQ |
ASK
|
3 days
|
China Compulsory Certification Implementation Detailed-Rules - Motor vehicle tires
|
CQC-C1201-2014
| Obsolete |
CQC-C1201-2014
|
| Standard ID | CQC-C1201-2015 (CQC C1201-2015; CQC-C12-01-2015; CQC-C1201-2015) | | Description (Translated English) | Mandatory product certification Implementation detail rules -- Motor vehicle tires | | Sector / Industry | China Quality Certification Center - CCC Implementation Detailed-Rules | | Classification of Chinese Standard | CQC | | Word Count Estimation | 42,456 |
CQC-C1201-2015: PDF in English
CQC-C1201-2015
Serial No.: CQC-C1201:2015
China Compulsory Certification Implementation
Detailed-Rules -- Tyre of Motor Vehicle
ISSUED ON: NOVEMBER 30, 2015
IMPLEMENTED ON: JANUARY 1, 2016
China Quality Certification Centre
Table of Contents
0 Introduction ... 5
0.1 Definitions ... 5
0.2 Classification management requirements of manufacturing enterprises
... 6
0.3 Requirements for utilizing test resources of manufacturing enterprises
... 8
1 Application scope ... 8
2 Terms and definitions ... 8
2.1 Tyres’ worst conditions (abbreviated as TWC conditions) ... 8
3 Certification standards ... 8
4 Certification mode ... 9
4.1 Basic certification mode ... 9
4.2 Applicability of certification mode ... 9
5 Division of certification units ... 9
6 Certification entrusting ... 10
6.1 Proposal and acceptance of certification application ... 10
6.2 Implementation arrangement ... 10
6.3 Rejection circumstances ... 11
7 Implementation of certification ... 11
7.1 Type test ... 11
7.2 Initial factory inspection ... 14
7.3 Evaluation and approval of certification results ... 16
7.4 Certification time-limit ... 16
8 After-Certification Supervision ... 17
8.1 Selection of after-certification supervision mode ... 17
8.2 Requirements for after-certification follow-up inspection ... 18
8.3 Sampling test or inspection at the production on-site ... 19
8.4 Market sampling test or inspection ... 20
8.5 Frequency and time of after-certification supervision ... 21
8.6 Evaluation and approval of after-certification supervision results ... 21
9 Certification certificate ... 22
9.1 Maintenance of the certification certificate ... 22
9.2 Contents of the certification certificate ... 23
9.3 Changes of the certification certificate ... 23
9.4 Suspension, resumption, cancellation, and withdrawal of the
certification certificate ... 26
9.5 Use of the certificate ... 27
10 Certification mark ... 27
11 Charge ... 27
12 Procedures and time-limit related to technical disputes, complaints and
appeals ... 28
13 Certification applied by ODM mode ... 28
Attachment 1 -- Materials to be submitted during certification entrusting ... 29
Attachment 2 -- Table of technical parameters of motor vehicle tyres ... 31
Attachment 3 -- Requirements for conformity of production control document
... 34
Attachment 4 -- Requirements for the content of conformity of production
control document implementation report ... 40
0 Introduction
“China Compulsory Certification Implementation Detailed-Rules - Tyre of Motor
Vehicle” (hereinafter referred to as Detailed-Rules) is compiled based on the
requirements of “Implementation Rules for China Compulsory Certification -
Tyre of Motor Vehicle” (CNCA-C12-01:2015) (hereinafter referred to as
Implementation-Rules). This Detailed-Rules is used together with the
Implementation-Rules as supportive document.
The product scope, certification basis of this Detailed-Rules shall comply with
relevant provisions of the Implementation-Rules. It shall also be adjusted
according to the Notices such as defined directory and directory adjustment
that are issued by Certification and Accreditation Administration of China
(hereafter referred to as CNCA).
According to the relevant requirements of the Implementation-Rules and quality
manuals, procedure documents, work instructions, etc., of China Quality
Certification Centre (hereinafter referred to as CQC), following the principles of
maintaining the effectiveness of product certification, improving quality of
product, serving certification companies, and controlling risk of certification, this
Detailed-Rules is formulated and issued. Through establishing the classification
management requirements of manufacturing enterprises, and combining the
classification of manufacturing enterprises, this Detailed-Rules determines the
implementation requirements for China Compulsory Certification of motor
vehicle tyre products.
0.1 Definitions
0.0.1 Testing at Manufacturer’s Premises (abbreviated as TMP mode)
It means that the engineers of designated laboratory use the testing equipment
in the factory laboratory to conduct testing. The factory shall dispatch test
personnel to provide assistance. The designated laboratory will examine,
approve and issue the test report.
0.1.2 Witnessed Manufacturer’s Testing (abbreviated as WMT mode)
It means that the engineer of designated laboratory witnesses the factory
laboratory’s test conditions and all tests completed by using the laboratory’s
equipment or according to the test plan submitted; or witnesses the partial test
conditions and the test items. Test personnel of the factory laboratory shall
provide the original records and draft up the test report together with the
engineer of designated laboratory according to relevant provisions. The
designated laboratory shall audit, approve and issue the test report.
CQC may re-determine the category of manufacturing enterprises regularly or
irregularly according to the information collected, and carry out dynamic
management. In case there is any change, the documents publicized by CQC
shall prevail. In principle, the classification result of manufacturing enterprises
shall be upgraded according to the sequence of D-C-B-A; and downgraded
according to the sequence of A-B-C-D or it may be directly downgraded to the
corresponding category according to the risk evaluation.
0.3 Requirements for utilizing test resources of manufacturing
enterprises
Applicable to after-certification supervision sampling test. Refer to the relevant
public documents of CQC for the requirements for utilizing test resources of
manufacturing enterprises for China Compulsory Certification of tyre products.
1 Application scope
This Detailed-Rules apply to new pneumatic tyres for motor vehicles, including
passenger car tyres, truck tyres and motorcycle tyres. The original design was
for motor vehicle tyres used in motor vehicles of M, N, O, and L categories (refer
to GB/T 15089 for definition of vehicle categories).
This Detailed-Rules does not apply to retreaded tyres and tyres specifically
designed for racing.
Scope adjustment due to change of relevant laws or regulations, relevant
product standards, technologies and industry policies and other factors shall be
subject to the notice issued by CNCA.
2 Terms and definitions
This Detailed-Rules adopts the terms and definitions in relevant regulations for
China compulsory certification.
2.1 Tyres’ worst conditions (abbreviated as TWC conditions)
In the same certification unit, under the same load type, the tyre specifications
that meet the following conditions at the same time: tyres of the maximum load
index and the highest speed grade.
3 Certification standards
Mandatory clauses in “Passenger car tyres” (GB 9743), “Truck tyres” (GB 9744)
and “Motorcycle tyres” (GB 518).
Note 3: Series: refer to product series specified in “Size designation,
dimensions, inflation pressure and load capacity for passenger car tyres” (GB/T
2978), “Size designation, dimensions, inflation pressure and load capacity for
truck tyres” (GB/T 2977) and “Series of motorcycle tyres” (GB/T 2983).
The final result of unit division is to be confirmed by the CQC product
certification engineer after specific review of each product information. If
necessary, the applicant and the CQC product certification engineer can
discuss the unit merger and splitting scheme.
6 Certification entrusting
6.1 Proposal and acceptance of certification application
CLIENT shall fill in the required enterprise information and product details, and
submit to CQC for certification entrusting via the Internet (www.cqc.com.cn).
CQC shall review the application, and give acceptance or rejection notice within
2 working days, or ask the CLIENT to modify the information and apply again.
When certification entrusting is accepted, CLIENT shall provide CQC with
required certification entrusting materials and technical documents according
to the requirements of CQC (see Attachment 1 for details).
After receiving the valid certification entrusting materials, CQC conducts a
compliance audit of the entrusting materials according to the relevant review
requirements, and issues a notice of data audit results to CLIENT. If the
materials do not meet the requirements, CLIENT shall be notified to complete
it.
CLIENT shall be responsible for the authenticity of the materials provided.
CQC manages and saves the certification materials provided by CLIENT, and
has the duty of confidentiality.
6.2 Implementation arrangement
CQC shall formulate the certification plan after acceptance, and notice CLIENT.
Certification plan usually includes:
(1) Applied certification mode and unit division;
(2) Required application materials list;
(3) Type test program;
(4) Information of designated laboratory;
and below V
Speed symbol above V (including V) 4 sets/specification
7.1.4 Test items and requirements
The tes......
|