JB/T 6879-2021 PDF English
US$125.00 · In stock · Download in 9 secondsJB/T 6879-2021: Dimensional tolerances of wet surfaces in the castings of centrifugal pumps Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid JB/T 6879: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| JB/T 6879-2021 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Dimensional tolerances of wet surfaces in the castings of centrifugal pumps
| Valid |
| JB/T 6879-2008 | English | 319 |
Add to Cart
|
3 days
|
Dimensional tolerances of wet surfaces in the castings of centrifugal pumps
| Obsolete |
| JB/T 6879-1993 | English | 239 |
Add to Cart
|
2 days
|
(Centrifugal casting parts overcurrent dimensional tolerances)
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: JB/T 6879-2021
JB/T 6879-2021: Dimensional tolerances of wet surfaces in the castings of centrifugal pumps---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JBT6879-2021
JB
MACHINERY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 23.080
J 71
Replacing JB/T 6879-2008
Dimensional Tolerances of Wet Surfaces in the Castings of
Centrifugal Pumps
ISSUED ON: DECEMBER 2, 2021
IMPLEMENTED ON: APRIL 1, 2022
Issued by: Ministry of Industry and Information Technology the People’s
Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Basic Provisions ... 4
3 Technical Requirements ... 4
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced JB/T 6879-2008 Dimensional Tolerances of Wet Surfaces in the
Castings of Centrifugal Pumps. Compared with JB/T 6879-2008, the major technical changes
of this Standard are as follows:
--- Modify the scope (see Clause 1 of this Edition; Clause 1 of the 2008 Edition);
--- Modify the dimensional tolerance requirements for the wet surfaces of castings produced
by precision casting method (see 3.1 of this Edition; 3.1 of the 2008 Edition);
--- Add the dimensional tolerance requirements for impellers and guide vanes produced by
ceramic casting method [see 3.1c) of this Edition];
--- Modify the dimensional limit deviations of the wet surfaces of impellers with Class-B
accuracy (see Table 1 of this Edition; Table 1 of the 2008 Edition);
--- Modify the dimensional limit deviations of the wet surfaces of guide vanes with Class-A
accuracy (see Table 2 of this Editon; Table 3 of the 2008 Edition);
--- Add the requirements for the hydraulic dimensional tolerances of the wet surfaces of
pump castings of other structural types (see 3.5 of this Edition).
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee on Pumps of
Standardization Administration of China (SAC/TC 211).
Drafting organizations of this Standard: Shenyang Casting and Forging Industry Co., Ltd.;
Shijiazhuang Kingda Pump Group Co., Ltd.; Shanghai Kaiquan Pump (Group) Co., Ltd.;
Shimge Pump Industry Group Co., Ltd.; Leo Group Pump (Zhejiang) Co., Ltd.; Chongqing
Pump Industry Co., Ltd.; Zhejiang Keer Pump Stock Co., Ltd.; Jiangsu Wuxin Pump Industry
Co., Ltd.; EBARA Great Pumps Co., Ltd.; Hangzhou Alkali Pump Co., Ltd.; Xiamen Koyur
Technology Co., Ltd.; Yiwu Shuanghong Mould Factory; and Shenyang Pump Research
Institute.
Chief drafting staffs of this Standard: Li Wanpeng, Yang Wen, Wang Yanhe, Ling Guirong,
Wang Lin, Bai Xiaobang, Chi Wu, Liu Ming, Qu Jingtian, Li Jinfu, Duan Chunfang, and Kang
Na.
The historical editions replaced by this Standard are as follows:
--- JB/T 6879-1993, JB/T 6879-2008.
Dimensional Tolerances of Wet Surfaces in the Castings of
Centrifugal Pumps
1 Scope
This Standard specifies the dimensional tolerances and technical requirements for the wet
surfaces in the castings of centrifugal pumps.
This Standard applies to all wet surfaces in metal castings of centrifugal pumps except light
metal parts and abrasion-resistant white iron casting.
2 Basic Provisions
The dimensional tolerances of the wet surfaces in the castings of centrifugal pumps are divided
into three accuracy levels: A, B, and C. The dimensional limit deviation values are shown in
Tables 1 ~ 3 according to different wet surfaces.
3 Technical Requirements
3.1 The selection of accuracy levels shall meet the following requirements:
a) Level-C is a general one. For centrifugal pumps with low performance deviation
requirements, Level-C can be used;
b) When Level-C is used, the performance deviation of the centrifugal pump cannot meet
the requirements and needs to be met by changing the dimensional tolerance, then Level-
B can be used;
c) Impellers and guide vanes that are required to be precision cast by investment casting or
ceramic casting can use Level-A.
3.2 For castings that are required to be manufactured according to Level-C, the accuracy level
is not marked in the drawings. For castings that are required to be manufactured according to
Levels-B or -A, the accuracy level shall be indicated in the drawings or technical documents.
3.3 The impeller, guide vane, and volute castings of the centrifugal pump are shown in Figures
1, 2, and 3, respectively. The dimensional limit deviations of the wet surfaces shall comply with
the provisions of Tables 1, 2, and 3, respectively. The blade misalignment of the intermediate
parting is shown in Figure 4, and the maximum allowable misalignment value shall comply
with the provisions of Table 4.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of JB/T 6879-2021 be delivered?Answer: The full copy PDF of English version of JB/T 6879-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of JB/T 6879-2021_English with my colleagues?Answer: Yes. The purchased PDF of JB/T 6879-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- JB/T 6879-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version JB/T 6879-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JB/T 6879-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of JB/T 6879-2021?A step-by-step guide to download PDF of JB/T 6879-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "JB/T 6879-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|