GB/T 5169.5-2020 (GB/T 5169.5-2008) PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 5169.5-2008: Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete GB/T 5169.5: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 5169.5-2020 | English | 359 |
Add to Cart
|
4 days
|
(Fire hazard test for electric and electronic products - Part 5: Test flame Needle flame test method Apparatus, confirmation test method and guide)
| Valid |
| GB/T 5169.5-2008 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance
| Obsolete |
| GB/T 5169.5-1997 | English | 519 |
Add to Cart
|
3 days
|
Fire hazard testing for electric and electronic products. Part 2: Test methods. Section 2: Needle-flame test
| Obsolete |
| GB/T 5169.5-1985 | English | RFQ |
ASK
|
3 days
|
Fire hazard testing for electric and electronic products--Test method of needle-flame
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 5169.5-2008
GB/T 5169.5-2008: Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5169.5-2008
GB
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
ICS 29.020
K 04
GB/T 5169.5-2008 / IEC 60695-11-5.2004
Replacing GB/T 5169.5-1997
Fire hazard testing for electric and electronic products
- Part 5.Test flames - Needle test method - Apparatus,
confirmatory arrangement and guidance
(IEC 60695-11-5.2004, Fire hazard testing - Part 11-5.Test flames - Needle
test method - Apparatus, confirmatory arrangement and guidance, IDT)
Issued on: DECEMBER 30, 2008
Implemented on: OCTOBER 1, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword... 3
Introduction... 7
1 Scope... 8
2 Normative references... 8
3 Terms and definitions... 8
4 General description of the test... 8
5 Description of the test apparatus... 9
6 Test specimen... 10
7 Severities... 11
8 Conditioning... 11
9 Test procedure... 11
10 Observations and measurements... 12
11 Evaluation of test results... 12
12 Information to be given in the relevant specification... 13
13 Test report... 13
Annex A (Normative) Confirmatory test arrangement... 15
Bibliography... 20
Foreword
GB/T 5169 “Fire hazard testing for electric and electronic products” consists of the
following parts.
- GB/T 5169.1-2007 Fire hazard testing for electric and electronic products - Part
1.Terminology concerning fire tests (IEC 60695-4.2005, IDT)
- GB/T 5169.2-2002 Fire hazard testing for electric and electronic products - Part
2.Guidance for assessing the fire hazard - General guidelines (IEC 60695-1-
1.1999, IDT)
- GB/T 5169.3-2005 Fire hazard testing for electric and electronic products - Part
3.Guidance for the preparation of requirements and test specifications for
assessing fire hazard of electronic components (IEC 60695-1-2.1982, IDT)
- GB/T 5169.5-2008 Fire hazard testing for electric and electronic products - Part
5.Test flames - Needle test method - Apparatus confirmatory arrangement and
guidance (IEC 60695-11-5.2004, IDT)
- GB/T 5169.9-2006 Fire hazard testing for electric and electronic products - Part
9.Guidance for assessing the fire hazard - Preselection testing procedures -
General guidelines (IEC 60695-1-30.2002, IDT)
- GB/T 5169.10-2006 Fire hazard testing for electric and electronic products - Part
10.Glow/hot-wire based test methods - Glow-wire apparatus and common test
procedure (IEC 60695-2-10.2000, IDT)
- GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part
11.Glowing/hot-wire based test methods - Glow-wire flammability test method
for end-products (IEC 60695-2-11.2000, IDT)
- GB/T 5169.12-2006 Fire hazard testing for electric and electronic products - Part
12.Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI)
test method for materials (IEC 60695-2-12.2000, IDT)
- GB/T 5169.13-2006 Fire hazard testing for electric and electronic product - Part
13.Glowing/hot-wire based test methods - Glow-wire ignition temperature
(GWIT) test method for materials (IEC 60695-2-13.2000, IDT)
- GB/T 5169.14-2007 Fire hazard testing for electric and electronic products - Part
14.Test flames - 1 kW nominal pre-mixed flame - Apparatus confirmatory test
arrangement and guidance (IEC 60695-11-2.2003, IDT)
- GB/T 5169.15-2008 Fire hazard testing for electric and electronic products - Part
15.Test flames - 500 W flames - Apparatus and confirmational test methods
(IEC/TS 60695-11-3.2004, IDT)
- GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part
16.Test flames - 50 W horizontal and vertical flame test methods (IEC 60695-
11-10.2003, IDT)
- GB/T 5169.17-2008 Fire hazard testing for electric and electronic products - Part
17.Test flames - 500 W flame test methods (IEC 60695-11-20.2003, IDT)
- GB/T 5169.18-2005 Fire hazard testing for electric and electronic products - Part
18.Toxicity of fire effluent - General guidance (IEC 60695-7-1.1993, IDT)
- GB/T 5169.19-2006 Fire hazard testing for electric and electronic products - Part
19.Abnormal heat - Mould stress relief distortion test (IEC 60695-10-3.2002,
IDT)
- GB/T 5169.20-2006 Fire hazard testing for electric and electronic products - Part
20.Surface spread of flame - Summary and relevance of test methods (IEC/TS
60695-9-2.2001, IDT)
- GB/T 5169.21-2006 Fire hazard testing for electric and electronic products - Part
21.Abnormal heat - Ball pressure test (IEC 60695-10-2.2003, IDT)
- GB/T 5169.22-2008 Fire hazard testing for electric and electronic products - Part
22.Test flames - 50 W flame - Apparatus and confirmational test method
(IEC/TS 60695-11-4.2004, IDT)
- GB/T 5169.23-2008 Fire hazard testing for electric and electronic products - Part
23.Test flames - 500W vertical flame test method for tubular polymeric materials
(IEC/TS 60695-11-21.2005, IDT)
- GB/T 5169.24-2008 Fire hazard testing for electric and electronic products - Part
24.Guidance for assessing the fire hazard - Insulating liquids (IEC/TS 60695-
1-40.2002, IDT)
- GB/T 5169.25-2008 Fire hazard testing for electric and electronic products - Part
25.Smoke obscuration - General guidance (IEC 60695-6-1.2005, IDT)
- GB/T 5169.26-2008 Fire hazard testing for electric and electronic products - Part
26.Smoke obscuration - Summary and relevance of test methods (IEC 60695-
6-2.2005, IDT)
- GB/T 5169.27-2008 Fire hazard testing for electric and electronic products - Part
27.Smoke obscuration - Small-scale static test - Description of the apparatus
(IEC/TR 60695-6-30.1996, IDT)
- GB/T 5169.28-2008 Fire hazard testing for electric and electronic products - Part
28.Smoke obscuration - Small-scale static test - Materials (IEC/TS 60695-6-
31.1999, IDT)
- GB/T 5169.29-2008 Fire hazard testing for electric and electronic products - Part
29.Heat release - General guidance
- GB/T 5169.30-2008 Fire hazard testing for electric and electronic products - Part
30.Heat release - Summary and relevance of test methods (IEC/TS 60695-8-
2.2008, IDT)
- GB/T 5169.31-2008 Fire hazard testing for electric and electronic products - Part
31.Surface spread of flame - General guidance (IEC 60695-9-1.2006, IDT)
This Part is Part 5 of GB/T 5169.
This Part equivalently adopts IEC 60695-11-5.2004 “Fire hazard testing - Part 11-5.
Test flames - Needle test method - Apparatus, confirmatory arrangement and guidance”
(English version). However, this Part has made some editorial modifications according
to 4.2 b) and 5.2 of GB/T 20000.2-2001 “Guidelines for standardization - Part 2.
Adoption of international standards”; Annex B (Informative) has been deleted; the
normative references IEC Guide 104.1997, ISO/IEC Guide 51.1999 and ASTM-B187
in Clause 2 have been included in the bibliography.
This Part replaces GB/T 5169.5-1997 “Fire hazard testing for electric and electronic
products - Part 2.Test methods - Section 2.Needle-flame test” (idt IEC 695-2-2.1991).
Main differences between this Part and GB/T 5169.5-1997 are as follows.
a) The scope has been broadened to allow this test method to also simulate the
effects of small flames from outside the equipment;
b) ADD the requirements for laboratory fumehood/chamber (5.3 of this Part);
c) ADD the requirements for timing device (5.5 of this Part);
d) ADD the requirements for test specimen (Clause 6 of this Part);
e) ADD the literal description of dimension (8 ± 1) mm in Figure 1 b) (9.2 of this
Part);
f) MODIFY the content of Clause 10 “Evaluation of test results” (Clause 11 of this
Part);
g) ADD the requirements for test report (Clause 13 of this Part);
h) In A.3, “the temperature of the copper block to increase from 100 °C ± 2 °C to
700 °C ± 3 °C” is revised into “the temperature of the copper block to increase
from 100 °C ± 5 °C to 700 °C ± 3 °C”;
i) ADD the type of copper material in Annex A;
j) ADD the bibliography.
Annex A of this Part is normative annex.
This Part was proposed by and shall be under the jurisdiction of National Technical
Committee on Fire Hazard Testing for Electric and Electronic Products (SAC/TC 300).
Responsible drafting organization of th...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
|