GB/T 39892-2021 PDF English
US$135.00 · In stock · Download in 9 secondsGB/T 39892-2021: Specification of Reporting and Processing of Motor Vehicle Product Defect Clue Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 39892-2021 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Specification of Reporting and Processing of Motor Vehicle Product Defect Clue
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 39892-2021
GB/T 39892-2021: Specification of Reporting and Processing of Motor Vehicle Product Defect Clue---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39892-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 03.120.99
A 00
Specification of Reporting and Processing of Motor
Vehicle Product Defect Clue
ISSUED ON: MARCH 09, 2021
IMPLEMENTED ON: OCTOBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Submitting Method of the Defect Clue Report ... 5
5 Content Requirements of the Defect Clue Report ... 5
6 Processing of Defect Clue Report ... 7
7 Feedback of Defect Clue Report ... 8
Appendix A (Informative) Motor Vehicle Product Defect Clue Report ... 10
Specification of Reporting and Processing of Motor
Vehicle Product Defect Clue
1 Scope
This Standard specifies the submitting method, content requirements, processing and
feedback of defect clue reports for motor vehicle product.
This Standard is applicable to any organization or individual submitting defect clue
reports, technical agency of defective product recall’s processing defect clue reports,
and auto product manufacturers' analysis and feedback on defect clue reports.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) is applicable to this document.
GB 16735 Road Vehicle - Vehicle Identification Number (VIN)
GB 16737 Road Vehicle - World Manufacturer Identifier (WMI) Code
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB 16735 and
GB 16737, and the following apply.
3.1 Motor vehicle product defect
Circumstances that generally do not meet the national standards and industry
standards for the protection of personal and property safety in the same batch, model
or category of automotive products due to design, manufacturing, marking, etc., or
other unreasonable threats to personal and property safety danger.
3.2 Defect clue report
The information that the products may have possible defects, which is submitted to the
technical agency of defective product recall by any organization or individual.
a) Timeliness principle: The defect clue report shall be submitted in time after the
failure of the motor vehicle product;
b) Objectivity principle: The defect clue report shall objectively and truly reflect the
failure of the motor vehicle product;
c) Integrity principle: The content of defect clue report shall be complete, accurate,
comprehensive and standardized.
5.2 Information of motor vehicle product
5.2.1 Information content of motor vehicle product
The information of motor vehicle product shall include vehicle identification number
(VIN), manufacturer name, vehicle brand, model series, purchase date and driving
mileage.
5.2.2 Information requirement of motor vehicle product
The information of motor vehicle product shall meet the following requirements:
a) VIN shall be consistent with the motor vehicle exit-factory certificate or motor
vehicle driving certificate;
b) The manufacturer's name, vehicle brand, and model series of motor vehicle
products shall be consistent with the motor vehicle exit-factory certificate,
imported motor vehicle inspection form or motor vehicle registration certificate;
c) The purchase date shall be consistent with the date of issuance of the unified
invoice for motor vehicle sales;
d) The driving mileage shall be consistent with the vehicle's odometer.
5.3 Failure information
The failure information shall include: the location of the failure, description of the failure,
traffic accident information, and failure maintenance measures. The detailed content
of each information is as follows:
a) The location of the failure is usually divided into engine, fuel system, transmission
system, braking system, steering system, suspension system, wheels and tires,
body and interior trim, airbags and seat belts, instrumentation/lighting/electronic
and electrical systems, advanced driving assistance systems, special devices for
new energy vehicles and others;
b) The description of the failure shall include: the occurrence time of the failure,
weather conditions, road conditions, vehicle speed, driving status (such as going
straight, turning, accelerating or braking, etc.), failure phenomenon, frequency of
The validity check of the defect clue report shall include the VIN, failure description,
and the mobile phone number of the reporter, etc. The defect clue report that does not
meet the validity requirements shall be notified to the defect clue reporter to correct it;
and those that still do not meet the requirements after the correction shall be eliminated.
The situations that should be eliminated are as follows:
a) VIN does not meet numbering requirements specified in GB 16735 and GB 16737;
b) The failure description only reflects issues such as consumer disputes, service
quality, and suspected speculation;
c) The reporter's mobile phone number is invalid.
6.2.2 Uniqueness check
The uniqueness check of the defect clue report shall include VIN, failure description,
etc. The defect clue report that does not meet the uniqueness requirement shall be
eliminated.
For the same motor vehicle product (with the same VIN), defect clue reports of identical
failure descriptions or similar failure descriptions with no substantial differences are
regarded as duplicate information and shall be eliminated.
6.3 Forwarding of defect clue report
Technical agency of defective product recall shall promptly forward the information that
meets the content requirements of the defect clue report to the motor vehicle product
manufacturer for feedback of defect clue report; and keep the transferring record of
the motor vehicle product defect clue report.
7 Feedback of Defect Clue Report
After receiving the defect clue report from the technical agency of defective product
recall, the motor vehicle product manufacturer shall carry out technical analysis and
feedback on the cause of the failure. The feedback of defect clue report shall include
but not limited to the following:
a) Verify the accuracy of the VIN, purchase date, driving mileage, location of failure,
failure description, and traffic accident information in the defect clue report;
b) Use user return visits, on-site inspections, etc., to confirm whether the failure
phenomenon is recurring, evaluate the frequency of the failure, find the cause of
the failure, and formulate failure maintenance measures, etc.;
c) Confirm the accurate failure mode corresponding to the failure description in the
defect clue report and whether a defective motor vehicle product recall bulletin
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 39892-2021 be delivered?Answer: The full copy PDF of English version of GB/T 39892-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 39892-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39892-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 39892-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 39892-2021?A step-by-step guide to download PDF of GB/T 39892-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 39892-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|