HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 35788-2017 PDF English

US$85.00 · In stock · Download in 9 seconds
GB/T 35788-2017: Security technical requirement for the electronic identification of motor vehicles
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 35788-2017English85 Add to Cart 0-9 seconds. Auto-delivery Security technical requirement for the electronic identification of motor vehicles Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 35788-2017
      

Similar standards

GB/T 35273   GB/T 34953.4   GB/T 35787   GB/T 19713   

GB/T 35788-2017: Security technical requirement for the electronic identification of motor vehicles


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT35788-2017
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 35.240.15 L 80 Security Technical Requirement for the Electronic Identification of Motor Vehicles Issued on: DECEMBER 29, 2017 Implemented on: JULY 01, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. 3. No action is required - Full-copy of this standard will be automatically & immediately delivered to your EMAIL address in 0~60 minutes.

Table of Contents

Foreword ... 3 1 Scope .. 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 General Requirements ... 5 5 Life Cycle Security... 6 Bibliography ... 9

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009. Please note that some contents of this document may involve the patents. The issuing agency of this document shall not assume the responsibility to identify these patents. This Standard was proposed and under the jurisdiction of Ministry of Public Security of the People’s Republic of China. Drafting organizations of this Standard. Traffic Management Research Institute of the Ministry of Public Security, China Electronics Standardization Institute, Beijing Zhongdian Huada Electronic Design Co., Ltd., Shanghai Quanray Electronics Co., Ltd., and National Quality Supervision and Testing Center for RFID Products. Chief drafting staffs of this Standard. Cai Gang, Huang Jin, Fang Wansheng, Song Jiwei, Liang Hao, Li Zhimin, Li Qiang, Lin Wanhua, Wu Weihong, and Li Kun. Security Technical Requirement for the Electronic Identification of Motor Vehicles

1 Scope

This Standard specifies the general security requirement and life cycle security for the electronic identification of motor vehicles. This Standard is applicable to the design, production, testing and application for the electronic identification of motor vehicles.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 35789.1-2017 General Specification for the Electronic Identification of Motor Vehicles – Part 1. Automobile. GM/T 0035.1-2014 Specifications of Cryptographic Application for RFID Systems - Part 1. Cryptographic Protection Framework and Security Levels GM/T 0035.5 Specifications of Cryptographic Application for RFID Systems - Part 5. Specification for Key Management

3 Terms and Definitions

The following terms and definitions and those ones stipulated in GB/T 35789.1-2017 are applicable to this document. 3.1 Identity authentication The process that confirms the electronic identification of motor vehicles or reads and writes the equipment claimed identity. 3.2 Ciphertext b) The chip producer shall establish the chip identifier management mechanism, through which to ensure the uniqueness of the chip identifier; c) The initial key shall be written before the electronic identification of motor vehicles leaves the factory; the transmission of the initial key shall establish the secure channel. The generating and updating modes of the initial key shall be agreed between the national registration authority of motor vehicles and the chip producer. 5.2 Initialization The national registration authority of motor vehicles shall write the key to electronic identification of motor vehicles; the read/write password in the registration information area of the motor vehicles; the read/write initial password in user areas. 5.3 Personalization The vehicle administration department of the public security organ shall write the registration information of motor vehicles in the registration information area of the electronic identification of the motor vehicles; and record the chip identifier, identification serial number, etc. into the national public security traffic management information system. 5.4 Use 5.4.1 Initial installation After the completion of the personalization and initial installation for the electronic identification of motor vehicles, the vehicle administration department of the public security organ shall use read/write device to verify the registration information of motor vehicles stored in the electronic identification of motor vehicles. 5.4.2 Replacement After the electronic identification of motor vehicles is damaged or lost, it shall be replaced. Finish the personalization and authentication of the electronic identification of motor vehicles according to the requirements in 5.3 and 5.4; and mark the electronic identification of original motor vehicle invalid in the national public security traffic management information system. 5.4.3 Information reading Use the application industry competent department authorized read/write device, after through the two-way identity authentication, to read the information in the designated user area. 5.4.4 Industry application information writing The application industry competent department shall write the updated password and ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 35788-2017 be delivered?

Answer: The full copy PDF of English version of GB/T 35788-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 35788-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35788-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 35788-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 35788-2017?

A step-by-step guide to download PDF of GB/T 35788-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 35788-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9