GB/T 33216-2016 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 33216-2016: Steel Open Die Forgings on Hammer - Classification of Complexity and Equivalent Coefficient Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 33216-2016 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Steel Open Die Forgings on Hammer - Classification of Complexity and Equivalent Coefficient
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 33216-2016
GB/T 33216-2016: Steel Open Die Forgings on Hammer - Classification of Complexity and Equivalent Coefficient
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33216-2016
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.85
J 32
Steel Open Die Forgings on Hammer - Classification
of Complexity and Equivalent Coefficient
ISSUED ON: DECEMBER 13, 2016
IMPLEMENTED ON: JULY 1, 2017
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Classification of Complexity for Steel Open Die Forgings on Hammer ... 4
3 Equivalent Coefficient ... 9
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee 74 on Forging of Standardization Administration of China
(SAC/TC 74).
The drafting organizations of this Standard: First Design and Research Institute MI
China Co., Ltd., Lanzhou Lanshi Group Co., Ltd., Beijing Research Institute of
Mechanical & Electrical Technology, Hubei Tri-ring Forging Co., Ltd.
The main drafters of this Standard: Xuqiang, Cui Shuangbin, Wen Tiejun, Zhang
Yunjun, Zhoulin, Yangwu, Weiwei, Chen Tianfu, Wang Bingzheng, Chen Wenjing,
Huang Mingwei.
Steel Open Die Forgings on Hammer - Classification
of Complexity and Equivalent Coefficient
1 Scope
This Standard stipulates the classification of complexity and equivalent coefficient for
steel open die forgings on hammer.
This Standard is applicable to general-purpose carbon-steel and structural alloy-steel
open die forgings (including tire die forgings) on hammer.
This Standard may be considered as a basis for the statistics of the standard
production volume of forgings, and the formulation of production quota and energy
consumption. In addition, it may also be considered as a reference for enterprises in
the formulation of sale price.
2 Classification of Complexity for Steel Open Die
Forgings on Hammer
In this Standard, steel open die forgings are classified into 9 types in accordance with
the complexity of forging shapes, as it is shown in Table 1.
3 Equivalent Coefficient
The nominal equivalent coefficient of each type of forgings shall comply with the
stipulations in Table 2. In this Standard, Type-VII forgings are taken as the benchmark
(nominal equivalent coefficient Zm = 1), which is corrected in accordance with the
following circumstances:
a) Correct in accordance with Table 3 and the tonnage of equipment used in
forging production;
b) Correct in accordance with Table 4 and the batch of forgings;
c) In terms of forging billet which are pre-forged through hot die forging, determine
the type in accordance with the shape, then, lower to an inferior type for
calculation (for example, lower Type-I to Type-II, and so forth). However, if it
belongs to Type-IX, it shall still be calculated as Type-IX;
d) Correct in accordance with Table 5 and the grade of steel used for the forgings.
Table 2 -- Table of Nominal Equivalent Coefficient (Zm)
Table 3 -- Table of Equipment Tonnage Correction Factor (X1)
Table 4 -- Table of Forging Batch Correction Factor (X2)
Type of Forgings
Nominal Equivalent
Coefficient Zm
Correction Factor X1
Mass of Forging
Hammer Dropping
Part/t
Correction Factor X2
Forging Batch/PCS
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 33216-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33216-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 33216-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33216-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33216-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 33216-2016?A step-by-step guide to download PDF of GB/T 33216-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 33216-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|