GB/T 12914-2018 PDF English
US$170.00 · In stock · Download in 9 secondsGB/T 12914-2018: Paper and board -- Determination of tensile properties -- Constant rate of elongation method (20mm/min) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 12914: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 12914-2018 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Paper and board -- Determination of tensile properties -- Constant rate of elongation method (20mm/min)
| Valid |
| GB/T 12914-2008 | English | 140 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Paper and board -- Determination of tensile properties
| Obsolete |
| GB/T 12914-1991 | English | 279 |
Add to Cart
|
3 days
|
Paper and board--Determination of tensile properties--Constant rate of elongation method
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 12914-2018
GB/T 12914-2018: Paper and board -- Determination of tensile properties -- Constant rate of elongation method (20mm/min)
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT12914-2018
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 85.010
Y 30
Replacing GB/T 12914-2008
Paper and Board - Determination of Tensile Properties
- Constant Rate of Elongation Method (20 mm/min)
[ISO 1924-2.2008, Paper and Board - Determination of Tensile Properties -
Part 2.Constant Rate of Elongation Method (20 mm/min), MOD]
Issued on. DECEMBER 28, 2018
Implemented on. JULY 1, 2019
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative References... 6
3 Terms and Definitions... 7
4 Principle... 8
5 Instruments... 8
6 Adjustment and Calibration of Tester... 10
7 Sample Preparation and Processing... 10
8 Test Procedures... 11
9 Calculation and Result Report... 12
10 Precision... 15
11 Test Report... 16
Appendix A (normative) Calibration of Tensile Tester... 18
Appendix B (informative) A Comparison of Symbols between this Standard and
ISO 1924-2.2008... 19
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard serves as a replacement of GB/T 12914-2008 Paper and Board -
Determination of Tensile Properties. In comparison with GB/T 12914-2008, the main
technical changes are as follows.
---The title of the Standard is modified;
---The Scope is modified (see Chapter 1; Chapter 1 of Version 2008);
---A statement of differences between this Standard of GB/T 22898-2008 [ISO
1924-3.2005, MOD] is added (see NOTE of Chapter 1);
---The terms and definitions are modified (see Chapter 3). the definitions of
elongation (see 3.3) and strain (see 3.4) are added;
---Relevant content of constant-rate loading method is deleted (see Chapter 4 of
Version 2008); standard chapters are re-arranged;
---Strain measurement accuracy is modified into elongation measurement
accuracy (see 5.1; 5.2.1.1 of Version 2008); supplementary statement of
elongation measurement accuracy is added (see Note 2 of 5.1);
---The calculation formula of breaking length is added (see 9.5);
---The calculation formula of modulus of elasticity is modified (see 9.8; 10.8 of
Version 2008);
---Relevant data of precision is added (see Table 2 and Table 3 of 10.3).
This Standard adopts the re-drafting method to modify and adopt ISO 1924-2.2008
Paper and Board - Determination of Tensile Properties - Part 2.Constant Rate of
Elongation Method (20 mm/min).
In comparison with ISO 1924-2.2008, the main technical differences and their causes
are as follows.
---In terms of Normative References, this Standard adjusts the technical
differences, so as to adapt to the technical conditions in China. The adjustments
are intensively reflected in Chapter 2 “Normative References”. See the specific
adjustments below.
GB/T 450, which modifies and adopts international standard, is used to
replace ISO 186;
GB/T 451.2, which equivalently adopts international standard, is used to
replace ISO 536;
GB/T 451.3, which identically adopts international standard, is used to
replace ISO 534;
GB/T 10739, which equivalently adopts international standard, is used to
replace ISO 187;
---In view of the fact that breaking length index is still extensively used in China,
the definition and calculation formula of breaking length are added (see 3.6 and
9.5);
This Standard makes the following editorial modifications.
---With reference to ISO 1924-3, a supplementary statement of elongation
measurement accuracy is provided (see NOTE 2 of 5.1.2), so as to distinguish
different test items’ different requirements for elongation measurement
accuracy;
---The letter codes of various tensile property indexes are modified (see Chapter
9), so as to facilitate instrument display, printing, and maintain consistency with
relevant standards;
---The unit of tensile property is modified (see 9.3), the numerical value remains
the same, so as to maintain consistency with relevant product standards and
the existing instruments;
---Appendix B (informative) is added, which is a comparison of symbols between
this Standard and ISO 1924-2.2008.
Please be noted that certain content of this document might involve patents. The
issuing institution of this document does not undertake the responsibility of identifying
these patents.
This Standard was proposed by China Light Industry Council.
This Standard shall be under the jurisdiction of National Technical Committee 141 on
Paper Industry of Standardization Administration of China (SAC/TC 141).
The drafting organizations of this Standard. Sichuan Changjiang Papermaking
Instrument Co., Ltd.; Shandong Century Sunshine Paper Group Co., Ltd.; China
National Pulp and Paper Research Institute Co., Ltd.; National Paper Product Quality
Supervision & Inspection Center.
The main drafters of this Standard. Yin Baochun, Li Defei, Wen Jianyu, Sheng
Yongzhong, Wang Dongxing.
The issuing of the previous versions is as follows.
---GB/T 453-1989, GB/T 453-2002;
---GB/T 12914-1991, GB/T 12914-2008.
Paper and Board - Determination of Tensile Properties
- Constant Rate of Elongation Method (20 mm/min)
1 Scope
This Standard stipulates the method of using test instrument with a constant rate of
elongation (20 mm/min) to determine tensile strength, strain at break, breaking length
and tensile energy absorption of paper and board. It also stipulates the calculation
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
3 Terms and Definitions
The following terms and definitions are applicable to this document.
Strain at break refers to the ratio of the elongation at the moment of breaking to the
initial test length under the specified test conditions.
4 Principle
Use a tensile tester, at a constant rate of elongation, stretch a sample of the specified
size to break; record its tensile force. If necessary, record its elongation. If the tensile
force and elongation can be continuously recorded, then, strain at break, tensile energy
absorption and modulus of elasticity can be determined.
5 Instruments
It is only needed when the modulus of elasticity needs to be determined.
NOTE. some tensile testers are equipped with the function of drawing the tensile force-
elongation curve and calculating the modulus of elasticity without external
connection with the above-mentioned devices.
6 Adjustment and Calibration of Tester
In the chuck, clamp a thin aluminum foil; measure the distance between the two
clamping indentations; check whether the test length is accurate.
7 Sample Preparation and Processing
In accordance with GB/T 450, take samples.
If tensile index or tensile energy absorption index needs to be determined, then,
in accordance with the stipulations of GB/T 451.2, determine the quantification of the
samples.
8 Test Procedures
Start the test, till the sample breaks. Then, record the applied maximum tensile
force. If necessary, record the elongation (expressed in mm), or directly read strain at
break (%) from the instrument.
9 Calculation and Result Report
Determine the maximum tensile force of each sample; calculate the average value of
the maximum tensile force. In accordance with Formula (1), calculate tensile strength
S, expressed in (kN/m).
10 Precision
The results of the repeatability test in the same laboratory are listed in Table 1 with the
coefficient of variation CV (within the laboratory); listed in Table 2 and Table 3 with the
standard deviation of repeatability sr and the limit of repeatability r.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 12914-2018 be delivered?Answer: The full copy PDF of English version of GB/T 12914-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 12914-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12914-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 12914-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 12914-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12914-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 12914-2018?A step-by-step guide to download PDF of GB/T 12914-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 12914-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|