GB/T 1033.1-2008 PDF English
US$105.00 · In stock · Download in 9 secondsGB/T 1033.1-2008: Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1033.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1033.1-2008 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
| Valid |
| GB/T 1033-1986 | English | 399 |
Add to Cart
|
3 days
|
Test method for density and relative density of plastics
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1033.1-2008
GB/T 1033.1-2008: Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1033.1-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.080.01
G 31
GB/T 1033.1-2008 / ISO 1183-1.2004
Replacing GB/T 1033-1986
Plastics - Methods for determining the density of non-
cellular plastics - Part 1.Immersion method liquid
pyknometer method and titration method
(ISO 1183-1.2004, IDT)
Issued on. AUGUST 04, 2008
Implemented on. APRIL 01, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 6
4 Conditioning... 6
5 Methods... 7
6 Correction for buoyancy in air... 13
7 Test report... 14
Annex A (informative) Liquid systems suitable for use in Method C... 15
Foreword
GB/T 1033 “Plastics - Methods for determining the density of non-cellular
plastics” consists of the following three parts.
- Part 1.Immersion method liquid pyknometer method and titration method;
- Part 2.Density gradient column method;
- Part 3.Gas pyknometer method.
This Part is Part 1 of GB/T 1033.
This Part identically adopts ISO 1183-1.2004 “Plastics - Methods for
determining the density of non-cellular plastics - Part 1.Immersion method,
liquid pycnometer method and titration method” (English version).
For ease of use, for ISO 1183-1.2004, this Part also made the following editorial
modifications.
a) deleted the foreword of ISO 1183-1.2004;
b) replaced the 2 international standards in “Normative references” with
national standards that use the international standards.
This Part replaces GB/T 1033-1986 “Test method for density and relative
density of plastics”.
Compared with GB/T 1033-1986, the main changes in this Part are as follows.
a) Immersion method. the thermostatic control temperature of the immersion
liquid is changed from 23°C±1°C to 23°C±0.5°C (or 27°C±0.5°C); the
specimen mass is changed from 1g～5g to greater than 1g; the diameter
of the suspension wire is changed from less than 0.13mm to less than
0.5mm; stipulated the requirements of weighing accuracy in weighing.
b) Liquid pyknometer method. stipulated the method of vacuuming the
pycnometer; stipulated the temperature of the pycnometer at the constant
temperature of the liquid bath; stipulated the number of measurements of
the density of each specimen and the method of expression of the
measurement results.
c) Added titration method; deleted float-sink method, densitometer method
and standard density gradient column method.
Annex A of this Part is informative.
This Part was proposed by China Petroleum and Chemical Industry Association.
This Part shall be under the jurisdiction of National Technical Committee on
Plastics of Standardization Administration of China (SAC/TC 15).
Main drafting organizations of this Part. National Chemical Building Materials
Testing Center (Materials Testing Department) of Sinopec Beijing Chemical
Research Institute.
The drafting organizations of this Part. National Synthetic Resin Quality
Supervision and Inspection Center, Beijing Yanshan Petrochemical Resin
Institute, National Petrochemical Organic Raw Material Synthetic Resin Quality
Inspection Center, Guangzhou Kingfa Technology Co., Ltd., National Plastics
Quality Inspection Center (Beijing).
Main drafters of this Part. Gui Hua, Hu Xiaoyi, You Huan, Chen Hongyuan,
Wang Chaoxian, Zhao Ping, Ye Nanbiao, Weng Yunxuan.
This Part was issued in December 1986 for the first time. This is the first revision.
Plastics - Methods for determining the density of non-
cellular plastics - Part 1.Immersion method liquid
pyknometer method and titration method
1 Scope
This Part of GB/T 1033 specifies three methods for the determination of the
density of non-cellular plastics in the form of void-free moulded or extruded
objects, as well as powders, flakes and granules.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Part of GB/T 1033.For dated references, the
subsequent amendments (excluding corrigendum) or revisions do not apply to
this Standard, however, parties who reach an agreement based on this
Standard are encouraged to study if the latest versions of these documents are
applicable. For undated references, the latest edition of the referenced
document applies.
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T
2035-2008 as well as the followings apply to this Part of GB/T 1033.
the ratio of the mass m of a sample to its volume V (at the temperature t),
expressed in kg/m3, kg/dm3 (g/cm3) or kg/L
4 Conditioning
The test atmosphere shall be in accordance with GB/T 2918-1998.In general,
conditioning specimens to constant temperature is not required, because the
determination itself brings the specimen to the constant temperature of the test.
5 Methods
Use freshly distilled or deionized water or another suitable liquid containing not
more than 0.1% of a wetting agent to help in removing air bubbles. The liquid
or solution with which the specimen comes into contact during the
measurement shall have no effect on the specimen.
Add more of the denser liquid until the heaviest pieces of specimen remain at
a constant level within the liquid for at least 1 min.
6 Correction for buoyancy in air
Where weighings are made in air, the values of the "apparent masses" obtained
shall be corrected to compensate for the effect of the air buoyancy on the
specimen and on any weights used. This will be the case if the accuracy of the
results is to be between 0.2% and 0.05%.
7 Test report
The test report shall include the following information.
Annex A
(informative)
Liquid systems suitable for Method C
Liquid system suitable for Method C of this Part is given in table A.1.
WARNING - some of the following chemicals may be hazardous.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1033.1-2008 be delivered?Answer: The full copy PDF of English version of GB/T 1033.1-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1033.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1033.1-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1033.1-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1033.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1033.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1033.1-2008?A step-by-step guide to download PDF of GB/T 1033.1-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1033.1-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|