GB 50204-2015 PDF English
US$145.00 · In stock · Download in 9 secondsGB 50204-2015: Code for quality acceptance of concrete structure construction Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 50204: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 50204-2015 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Code for quality acceptance of concrete structure construction
| Valid |
| GB 50204-2002 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Code for acceptance of constructional quality of concrete structures (GB 50204-2002(2011))
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 50204-2015
GB 50204-2015: Code for quality acceptance of concrete structure construction---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB50204-2015
UDC GB
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
P GB 50204-2015
Code for Quality Acceptance of Concrete
Structure Construction
Issued on. DECEMBER 31, 2014
Implemented on. SEPTEMBER 1, 2015
Jointly issued by. Ministry of Housing and Urban-Rural Development;
General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China.
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Code for Quality Acceptance of Concrete Structure
Construction
Developed by. Ministry of Housing and Urban-Rural Development of the
People's Republic of China
Approved by. Ministry of Housing and Urban-Rural Development of the
People's Republic of China
Implementation date. September 1, 2015
China Architecture and Building Press
Beijing, 2014
Table of Contents
Foreword... 6
1 General Provisions... 8
2 Terms... 8
3 Basic Requirements... 9
4 Formwork Subitem Project... 10
5 Steel Bar Subitem Project... 14
6 Prestressed Subitem Project... 21
7 Concrete Subitem Project... 27
8 Cast-in-situ Structure Subitem Project... 31
9 Precast Structure Subitem Project... 36
10 Concrete Structures Sub-subsection Project... 41
Appendix A Records on Quality Acceptance... 44
Appendix B Inspection of Structural Performance of Flexural Precast Members... 47
B.1 Inspection Requirements... 47
B.2 Inspection Method... 50
Appendix C Strength Inspection of Test Piece Cured at the Same Condition of Concrete Structure
Entity... 54
Appendix D Inspection on Concrete Strength of Structure Entity with Rebound and Core-drilling
Method... 55
Appendix E Inspection on Protective Layer Thickness of Steel Bar of Structure Entity... 57
Appendix F Inspection on Positional and Dimensional Deviation of Structure Entity... 59
Wording Explanation in This Code... 61
List of Quoted Standards... 62
1 General Provisions
1.0.1 This code is developed in order to strengthen the construction engineering quality
management, unify acceptance of concrete structure engineering construction quality and
guarantee project construction quality.
1.0.2 This code is applicable to construction quality acceptance of concrete structure.
1.0.3 Quality acceptance of concrete structure construction shall not only comply with those
specified in this code, but also comply with those in the current relevant national standards.
2 Terms
2.0.1 Concrete structure
The structure mainly made of concrete, including plain concrete structure, reinforced
concrete structure and prestressed concrete structure, which may be classified into cast-in-situ
concrete structure and precast concrete structure according to the construction method.
2.0.2 Cast-in-situ concrete structure
The concrete structure is made by erecting formwork in situ and integral casting,
hereinafter referred to as cast-in-situ structure.
2.0.3 Precast concrete structure
The concrete structure is made by assembling and connecting the precast concrete
members or parts, hereinafter referred to as precast structure.
2.0.7 Inspection
Activity in which the features and performances of the inspected item are determined,
inspected and tested, and the results are compared with the requirements specified in
standards so as to verify the acceptance of each performance.
2.0.8 Inspection lot
The inspection body summarized according to the same production conditions or
provisions for the sampling inspection and comprising of certain quantity of samples.
3 Basic Requirements
3.0.1 Concrete structure, as sub-subsection project, may be classified into subitem projects
of formwork, steel bar, prestress, concrete, cast-in-situ structure and precast structure. Each
subitem project may be classified into several inspection lots according to approaching lots,
shift, storey, structural joint or construction section in the principle of consistence with
production and construction mode and being convenient for construction quality control.
3.0.5 The sampling shall be carried out randomly in inspection lot and distributed evenly
and typically.
3.0.6 Treatment of ineligible inspection lot shall meet the following requirements.
3.0.7 The certified products or the products with stable source and which are eligible upon
inspection only once in continuous three lots may be allowed to expand to be double of the
capacity of inspection lot at site inspection according to the relevant requirements of this code
and the capacity can be doubled only.
3.0.8 Materials, members and accessories, appliance and semi-finished products applied in
concrete structure engineering shall be inspected according to the lot number on site.
4 Formwork Subitem Project
4.1 General Requirements
4.1.1 Formwork shall be prepared with a construction scheme. Technology demonstration
shall be carried out for the special construction schemes of creeping formwork, tool-type
formwork and tall formwork support.
4.2 Formwork Installation Dominant items
4.2.1 Technical index of formwork and support materials shall comply with the
requirements of current relevant standards of the Nation. The formwork and support materials
shall be sampled for inspection over the appearance, specification and dimension when
entering into the site.
4.2.3 Formwork and support of post-cast strip shall be arranged separately.
Inspection quantity. 100% inspection.
Inspection method. observing.
4.2.5 Formwork installation shall meet the following requirements.
4.2.6 Release agent shall comply with the construction scheme in the variety and
application methods and it shall not influence the structural performance and decoration
construction or contaminate the joints where steel bar, prestressed bar are embedded parts are
concreted or pollute the environment.
5 Steel Bar Subitem Project
5.1 General Requirement
5.1.1 Acceptance of concealed work shall be performed before concreting, covering.
5.2 Materials
Dominant Items
5.2.1 Where steel bars approach the site, test pieces shall be sampled for yield strength,
tensile strength, elongation percentage, bending properties and weight deviation
according to relevant current standards of the nation, and inspection results shall meet
those specified in corresponding standards.
5.2.2 Where fabricated steel bars approach the site, test pieces shall be sampled for yield
strength, tensile strength, elongation percentage and weight deviation and inspection results
shall meet the requirements of current relevant standards of the Nation.
As for the fabricated steel bars made of hot-rolled steel bar, only weight deviation inspection
may be carried out when the representatives of constructor or supervisor monitor the
production on the site and provide third party inspection reports of mechanical performance
for raw material steel bar.
5.3 Steel Bar Processing
Dominant Items
5.3.1 Inside diameter of arc of bent steel bar shall meet the following requirements.
5.3.3 The terminal of stirrup and lacing bar shall be made into hooks according to the design
requirements and the following requirements.
5.3.4 Coil steel bar, after being straightened, shall be subjected to mechanical performance
and weight deviation inspection and its strength shall comply with the requirements of current
relevant standards of the Nation and its percentage elongation after fracture and weight
deviation shall be in accordance with those specified in Table 5.3.4.
5.4.4 The position of steel bar joints shall meet design and construction scheme
requirements. As for structures provided with seismic fortification requirements, splicing of
steel bars shall not be carried out within the scope of beam end, column end and stirrup
densified area. The distance from the joint terminal to the bending starting-point of the steel
bar shall not be less than 10 times the steel bar diameter.
6 Prestressed Subitem Project
6.1 General Requirements
6.1.1 Prestressed concealed project acceptance shall be performed before concreting,
covering.
6.1.3 Prestressing machine and pressure gauge for prestressed tendon shall be subjected to
regular maintenance, both of which shall be accompanied with calibration and application,
and the calibration period shall not exceed half a year.
6.2 Materials
Dominant Items
6.2.1 Where prestressed tendons approach the site, test pieces shall be sampled for
tensile strength and elongation inspection according to relevant current standards of the
nation, and inspection results shall meet those specified in corresponding standards.
Inspection quantity. determine according to the delivered batch and product
sampling inspection scheme.
6.2.4 The anchorage system for unbonded prestressed tendon under Class IIIa and Class IIIb
environmental conditions shall be subjected to waterproof performance inspection according
to the relevant requirements of the current professional standard JGJ 92 Technical
Specification for Concrete Structures Prestressed with Unbonded Tendons, and the inspection
result shall meet those specified in the said standard.
6.3 Fabrication and Installation
Dominant Items
6.3.1 Variety, specification, grade and quantity of prestressed tendons to be installed
must meet the design requirements.
6.4 Tensioning and Extending
Dominant Items
6.4.1 Member concrete strength shall be inspected before tensioning or extending or
prestressed tendons. The compressive strength of concrete cube test piece cured under the
same condition shall meet the design requirements, otherwise, the following requirements
shall be met.
7 Concrete Subitem Project
7.1 General Requirements
7.1.1 Concrete strength shall be subjected to inspection and evaluation by lots according to
the requirements of the current national standard GB/T 50107 Standard for Evaluation of
Concrete Compressive Strength. As for the concrete in the same inspection lot, the
construction duration should not exceed 3 months.
7.1.3 Where the strength of concrete test piece fails to pass the evaluation, qualified testing
organization shall be entrusted to test and estimate the strength of concrete in structural
members according to the requirements of relevant current standards of the nation as well as
process according to those specified in 10.2.2 of this code.
7.2 Raw Materials
Dominant Items
7.2.1 Variety, code number, strength grade, packaging or bulking No. and delivery date
of cement in case of approaching the site shall be checked and strength, stability and
setting time of such cement shall also be inspected, for which the inspection result shall
meet the relevant requirements of the current national standard GB 175 Common
Portland Cement.
7.2.4 Quality of coarse aggregate and fine aggregate in concrete materials shall meet the
requirements of the current professional standard JGJ 52 Standard for Technical Requirements
and Test Method of Sand and Crushed Stone (or Gravel) for Ordinary Concrete, sea sand
having been purified shall meet the requirements of the current professional standard JGJ 206
Technical Code for Application of Sea sand Concrete, and reclaimed concrete aggregate shall
meet the requirements of the current national standard GB/T 25177 Recycled Coarse
7.3 Concrete Mixtures
Dominant Items
7.3.1 Quality of ready-mixed concrete in case of approaching the site shall meet the
requirements of the current national standard GB/T 14902 Ready-mixed Concrete.
Inspection quantity. 100% inspection.
Inspection method. inspecting the quality certificate document.
8 Cast-in-situ Structure Subitem Project
8.1 General Requirements
8.1.1 Quality acceptance of the cast-in-situ structure shall meet the following requirements.
8.2 Appearance Quality
Dominant Items
8.2.1 The appearance quality of cast-in-situ structure shall be free from serious defects.
Serious defects having been caused shall be provided with technical processing scheme
by the construction unit and processed after the scheme is approved by the supervising unit;
the technical processing scheme for crack or serious defect at connecting position and other
serious defects influencing structural safety shall also be approved by the design unit.
Positions processed shall be accepted again.
9 Precast Structure Subitem Project
9.1 General Requirements
9.1.1 Acceptance of concealed work shall be carried out before pouring concrete on the
connecting part of precast structure and composite member. Acceptance of concealed work
shall include the following main content.
9.1.2 The joint construction quality and waterproof performance of precast structure shall
meet the design requirements and the requirements of current relevant standards of the
Nation.
9.2 Precast Members
Dominant Items
9.2.1 The quality of precast members shall meet those specified in this code, the
requirements of current relevant standards of the Nation and the design requirements.
Inspection quantity. 100% inspection.
Inspection method. inspecting quality certificate documents or quality acceptance record.
9.2.5 Precast members shall be provided with markings.
Inspection quantity. 100% inspection.
Inspection method. observing.
9.2.6 The appearance quality of precast members shall be free from common defects.
Inspection quantity. 100% inspection.
Inspection method. observing, inspecting the treatment record.
9.2.7 The dimensional deviation and inspection method of precast members shall meet those
specified in Table 9.2.7.Where there are design requirements, the design requirements shall
be met with. In the construction process, the permissible deviation of the center line position
of embedment parts used temporarily may take two times of the value specified in Table
9.3.8 After construction, the appearance quality of precast structure shall be free from
common defect.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 50204-2015 be delivered?Answer: The full copy PDF of English version of GB 50204-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 50204-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB 50204-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 50204-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 50204-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 50204-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 50204-2015?A step-by-step guide to download PDF of GB 50204-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 50204-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|