Search result: YY/T 1842.7-2023
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YY/T 1842.7-2023 | English | 589 |
Add to Cart
|
5 days [Need to translate]
|
Testing Specification for Vapor Recovery Systems of Gasoline Dispensing Facilities
| Valid |
YY/T 1842.7-2023
|
| Standard ID | YY/T 1842.7-2023 (YY/T1842.7-2023) | | Description (Translated English) | Medical devices -- Connectors for reservoir delivery systems for healthcare applications -- Part 7: Connectors for intravascular infusion | | Sector / Industry | Medical Device & Pharmaceutical Industry Standard (Recommended) | | Classification of Chinese Standard | C30 | | Classification of International Standard | 11.040.25 | | Word Count Estimation | 30,320 | | Date of Issue | 2023-01-13 | | Date of Implementation | 2024-01-15 | | Issuing agency(ies) | State Drug Administration | | Summary | This standard specifies the dimensions, design and functional characteristics of connectors intended to connect intravascular infusion sets and intravascular infusion reservoirs. This standard does not specify dimensional or performance requirements for medical devices or accessories using these connectors. These requirements are given in the standards for specific medical devices or accessories. The following connections are outside the scope of this standard: stoppers as specified in ISO 8536-2; mixing/adding ports of IV reservoir containers and intended mating devices; filling ports of non-electrically actuated (i.e. elastic) pumps. |
YY/T 1842.7-2023
ICS 11.040.25
CCSC30
Pharmaceutical Industry Standard of the People's Republic of China
For medical equipment, medical liquid storage container, delivery system
Connectors - Part 7.Connectors for intravascular infusion
(ISO 18250-7.2018, IDT)
Released on 2023-01-13
2024-01-15 Implementation
Released by the State Drug Administration
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is Part 7 of YY/T 1842 "Connectors for Delivery System of Medical Liquid Storage Containers for Medical Devices". YY/T 1842 has
The following parts have been published.
--- Part 1.General requirements and general test methods;
--- Part 6.Neural applications;
--- Part 7.Connections for intravascular infusion;
--- Part 8.Apheresis citrate anticoagulant application.
This document identically adopts ISO 18250-7.2018 "Connectors for Medical Devices and Medical Liquid Storage Container Delivery Systems - Part 7.Blood vessels
Connecting parts for internal infusion".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by the State Drug Administration.
This document is under the jurisdiction of the National Standardization Technical Committee of Medical Infusion Sets (SAC/TC106).
This document was drafted by. Shandong Provincial Institute of Medical Devices and Drug Packaging Inspection, Zhejiang Fuerte Medical Devices Co., Ltd., Shandong
Dongwei Gao Group Medical Polymer Products Co., Ltd., Anhui Tiankang Medical Technology Co., Ltd., Beijing Guoyi Huaguang Certification Co., Ltd.
company.
The main drafters of this document. Li Yuanyu, Su Weidong, Cong Rinan, Zhou Yuyan, Wang Meiying, Liu Yang, Zhang Luwen, Bai Baodong.
introduction
When formulating the YY 0916 (ISO 80369) "Small-aperture Connectors for Medical Liquids and Gases" series of standards, it was found that the wrongly connected wind
The risks are not limited to the connections to the patient, but also the connections used for the reservoir portion at the end of the system have a potentially high risk of misconnection.
For a number of reasons, these reservoir connections do not fit within the scope of the ISO 80369 series of standards, so it was decided to
Connector connectors are specially developed as an independent standard series. The ISO 18250 series of standards takes into account the misalignment of reservoir connections in different applications.
Risk of misconnection, including standardized IV piercers specified in ISO 8536-4 and ISO 1135-4.
During the formulation of YY/T 0916.3, it was found that various medical device standards stipulated a variety of intravenous infusion puncture devices, but no
There are requirements defining the geometry and material of the female port of an IV reservoir container. However, various standards define the performance of the female port.
YY/T 1842 "Connectors for Delivery System of Medical Liquid Storage Containers for Medical Devices" is proposed to be composed of the following parts.
--- Part 1.General requirements and general test methods;
--- Part 3.Gastrointestinal application;
--- Part 6.Neural applications;
--- Part 7.Connections for intravascular infusion;
--- Part 8.Apheresis citrate anticoagulant application.
This document specifies the design, dimensions and materials of female ports. This document refers to existing performance standards. This document contains the
Test to prove that the piercer and the female port are not connected to other connectors of YY/T 1842 series liquid storage containers.
This document also includes the requirements for allowing the traditional YY/T 0916.7 Luer connectors to be used as liquid reservoir connectors for intravascular applications
full analysis.
This document only specifies the interface requirements for the connectors of intravascular infusion storage containers and intravascular infusion sets. This document is not a product
standard.
If there is an asterisk (*) before the beginning of the title, paragraph or table title, relevant instructions and guidelines are given in Appendix A.
For medical equipment, medical liquid storage container, delivery system
Connectors - Part 7.Connectors for intravascular infusion
1 Scope
This document specifies the dimensions, as well as the design and function
performance requirements.
This document does not specify dimensional or performance requirements for medical devices or accessories using these connectors. These requirements in dedicated medical device
or given in the attached standard.
Example 1.The medical devices that can use the connector of the intravascular infusion storage container are as follows.
---The infusion port of the intravenous infusion storage container and the piercer of the matched intravenous infusion/intravascular infusion set/pipe, such as. intravenous infusion bag/container and intravenous infusion
The piercer inlet end of the intravenous infusion set;
--- Devices intended to be used in series between the infusion port of the intravenous infusion storage container and the piercer of the associated intravenous infusion/supply line;
---Syringes and IV sets using Luer connectors.
The following connections are outside the scope of this document.
---Corps specified in ISO 8536-2;
--- The mixing/adding port of the intravenous infusion storage container and the intended matching device.
Example 2.Rubber stoppers for injection into reservoir containers and associated drug addition devices (syringes, needles, reconstitution devices, and other devices for accessing mixing or addition ports
auxiliary equipment).
--- Injection ports of non-electrically driven (ie elastic) pumps.
Note 1.See Appendix G for details of commonly used alternative trocars.
Note 2.Even if the special medical device standard does not currently require it, manufacturers are still encouraged to incorporate the connectors specified in this document into the intravascular infusion
Medical devices or accessories. It is expected that when the standard for special medical devices is revised, the requirements for the connection parts of the liquid storage container specified in ISO 18250 will be added.
Require.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
Note. GB 8369.1-2019 Disposable blood transfusion sets Part 1.Gravity transfusion (ISO 1135-4.2015, MOD)
Note. GB 14232 (all parts) bag-type plastic containers for human blood and blood components [ISO 3826 (all parts)]
Note. GB 8368-2018 Single-use infusion set gravity infusion type (ISO 8536-4.2010, MOD)
......
|