HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

YY/T 1705-2020 PDF English

US$185.00 · In stock · Download in 9 seconds
YY/T 1705-2020: Implants for surgery--Determination of impact resistance of ceramic femoral heads for hip joint prostheses
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
YY/T 1705-2020English185 Add to Cart 0-9 seconds. Auto-delivery Implants for surgery--Determination of impact resistance of ceramic femoral heads for hip joint prostheses Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: YY/T 1705-2020
      

Similar standards

YY/T 1860.1   YY/T 1748   YY/T 1653   YY/T 1707   

YY/T 1705-2020: Implants for surgery--Determination of impact resistance of ceramic femoral heads for hip joint prostheses


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YYT1705-2020
YY PHARMACEUTICAL INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 11.040.40 C 35 Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses (ISO 11491:2017, MOD) ISSUED ON: FEBRUARY 21, 2020 IMPLEMENTED ON: JANUARY 01, 2021 Issued by: National Medical Products Administration

Table of Contents

Foreword ... 3 Introduction ... 4 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Principle ... 6 5 Apparatus and equipment ... 7 6 Procedure ... 11 7 Impact test: Calculation of an impact energy ... 13 8 Test report ... 13 Bibliography ... 15

Foreword

This Standard is drafted in accordance with the rules given in GB/T 1.1-2009. This Standard uses the redraft law to modify and adopt ISO 11491:2017 "Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses". The technical differences between this Standard and ISO 11491:2017 are as follows: - As for the normative references, this Standard has made adjustments with technical differences, to adapt to the technical conditions of China. The adjustments are mainly reflected in Clause 2 “Normative references”. The specific adjustments are as follows:  Replace ISO 4288 with GB/T 10610, which is identical to the international standard;  Replace ISO 197-1 with GB/T 11086, which modifies and adopts the international standard;  Replace ISO 7206-10 with YY/T 0809.10, which modifies and adopts the international standard; - Regarding bibliography, replace ISO 148-2 with GB/T 3808, which modifies and adopts the international standard. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This Standard was proposed by National Medical Products Administration. This Standard shall be under the jurisdiction of Subcommittee 1 on Orthopedic Implants, National Technical Committee 110 on Implants for Surgery and Orthopedic Devices of Standardization Administration of China (SAC/TC 110/SC 1). Drafting organizations of this Standard: Tianjin Medical Devices Quality Supervision and Testing Center, Fito Samo Medical Devices (Beijing) Co., Ltd., Beijing Montagne Medical Device Co., Ltd. Main drafters of this Standard: Wang Tao, Li Wenjiao, Zhao Binghui, Liang Fanghui, Xu Zhiyong, Xing Jianshuo. Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses

1 Scope

This Standard specifies two alternative test methods for determining the impact resistance of ceramic femoral heads for hip joint prostheses. This Standard applies to ceramic femoral heads for hip joint prostheses.

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document. GB/T 10610 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (GB/T 10610-2009, ISO 4288:1996, IDT) GB/T 11086 Copper and copper alloys - Terms and definitions (GB/T 11086- 2013, ISO 197-1:1983, MOD) YY/T 0809.10 Implants for surgery - Partial and total hip joint prostheses - Part 10: Determination of resistance to static load of modular femoral heads (YY/T 0809.10-2014, ISO 7206-10:2003, MOD)

3 Terms and definitions

For the purposes of this document, the terms and definitions given in YY/T 0809.10 and the following apply. 3.1 Impact energy Potential mechanical energy of the falling/drop weight used for applying the impact. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of YY/T 1705-2020 be delivered?

Answer: The full copy PDF of English version of YY/T 1705-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YY/T 1705-2020_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1705-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- YY/T 1705-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of YY/T 1705-2020?

A step-by-step guide to download PDF of YY/T 1705-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YY/T 1705-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9