YY/T 1465.3-2016 PDF English
US$150.00 · In stock · Download in 9 secondsYY/T 1465.3-2016: Immunogenic evaluation method of medical devices - Part 3: Plaque forming cells assay - Agar gel solid-phase method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YY/T 1465.3-2016 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Immunogenic evaluation method of medical devices - Part 3: Plaque forming cells assay - Agar gel solid-phase method
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YY/T 1465.3-2016
YY/T 1465.3-2016: Immunogenic evaluation method of medical devices - Part 3: Plaque forming cells assay - Agar gel solid-phase method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YYT1465.3-2016
YY
PHARMACEUTICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.01
C 30
Immunogenic Evaluation Method of Medical Devices – Part 3:
Plaque Forming Cells Assay – Agar Gel Solid-Phase Method
ISSUED ON: JULY 29, 2016
IMPLEMENTED ON: JUNE 1, 2017
Issued by: China Food and Drug Administration
Table of Contents
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Test Principle ... 6
5 Test Animals ... 6
6 Sample Preparation and Exposure Routes ... 6
7 Selection of Control Samples ... 7
8 Test Procedures ... 7
9 Calculation of Results ... 8
10 Judgment of Result ... 9
11 Inspection of Reliability ... 9
12 Test Report ... 9
Bibliography ... 11
Immunogenic Evaluation Method of Medical Devices – Part 3:
Plaque Forming Cells Assay – Agar Gel Solid-Phase Method
1 Scope
This Part of YY/T 1465 provides a method for the determination of plaque-forming cells by
agar gel solid-phase method.
This Part is suitable for evaluating the impact of medical devices/materials on the body's
humoral immune function.
2 Normative References
The following documents are essential to the application of this Document. For the dated
documents, only the versions with the dates indicated are applicable to this Document; for the
undated documents, only the latest version (including all the amendments) is applicable to this
Document.
GB/T 16886.1 Biological evaluation of medical devices - Part 1: Evaluation and testing
within a risk management process (GB/T 16886.2-2011, ISO 10993-1:2009, IDT)
GB/T 16886.2 Biological evaluation of medical devices - Part 2: Animal welfare
requirements (GB/T 16886.2-2011, ISO 10993-2:2006, IDT)
GB/T 16886.11 Biological evaluation of medical devices - Part 11: Tests for systemic
toxicity (GB/T 16886.11-2011, ISO 10993-6:2006, IDT)
GB/T 16886.12 Biological evaluation of medical devices - Part 12: Sample preparation
and reference materials (GB/T 16886.12-2005, ISO 10993-12:2002, IDT)
GB/T 16886.20 Biological evaluation of medical devices - Part 20: Principles and methods
for immunotoxicology testing of medical devices (GB/T 16886.20-2015, ISO/TS 10993-
20:2006, IDT)
3 Terms and Definitions
For the purposes of this Document, the terms and definitions given in GB/T 16886.1, GB/T
16886.2, GB/T 16886.12, and GB/T 16886.20 apply.
4 Test Principle
After sensitizing mice with sheep red blood cells (SRBC), B lymphocytes (plasma cells)
capable of producing anti-SRBC antibodies will appear in the immune organs of the mice,
especially the spleen. The number and function of these cells can reflect the status of the body's
humoral immune function. When these cells that can secrete anti-SRBC antibodies are
incubated with SRBCs, the released antibodies will bind to the SRBCs to form antigen-antibody
complexes. With the participation of complement, the SRBCs around these B lymphocytes will
dissolve and plaque will appear. When medical devices/materials act on the human body, the
impact of medical devices/materials on the body's humoral immune function can be evaluated
by detecting changes in the number of these plaque-forming cells.
5 Test Animals
5.1 Selection of animal species
The animal species selected for this test is mice, regardless of gender. BalD/c mice are the
preferred strain. It is appropriate to use adult nulliparous and non-pregnant mice weighing
18g~22g. At the beginning of the test, the difference in animal body weight should be minimal
and not exceed ±20% of the average body weight.
5.2 Preparation of animals
All animal tests shall be conducted in laboratories approved by national accreditation agencies
and in compliance with all applicable regulations on laboratory animal welfare; and shall meet
the requirements of GB/T 16886.2. Test animals are randomly selected, individually marked,
and adapt to laboratory conditions for at least 5 d before the test.
6 Sample Preparation and Exposure Routes
6.1 For common insoluble non-degradable substances in medical devices, sample extracts can
be prepared according to the principles of GB/T 16886.12. A suitable solvent shall be used for
rigorous extraction to dissolve all extractable components. Extracts should be prepared on the
same day unless stability data are available to demonstrate acceptability of storage. According
to the intended use of the sample, refer to the requirements of GB/T 16886.11 to determine the
animal contact mode of the sample/extract. Commonly used methods of animal contact include
intragastric administration, intraperitoneal injection, and intravenous injection. The exposure
dose and exposure time can be designed with reference to the requirements for acute, subacute,
sub-chronic and chronic systemic toxicity tests in GB/T 16886.11, and shall be stated in the
final test report.
6.2 For degradable medical devices, the contact method between the device and animals shall
NOTE: Gradient dilution of the material or its extract will help to derive the dose-effect relationship of
the immune response. It is recommended that the test sample group be tested with different doses.
8.2 Sample and control contact
Animals in each test group are exposed to samples according to the selected dose, route and
period. Animals in the negative control group are exposed to the negative control substance
(extraction medium) in the same manner.
8.3 SRBC immunization
At the beginning of the main test, mice in the immune test sample group, negative control group
and positive control group are intraperitoneally injected with 2% SRBC (volume fraction), 0.2
mL/mouse. At the same time, animals in the positive control group are injected intraperitoneally.
The animals are sacrificed on the 4th day after SRBC injection for tests.
8.4 Preparation of spleen cell suspension
After immunization with SRBC, the mice are sacrificed, and their spleens are immediately
dissected and placed in an ice bath. A little Hank’s solution is added and a spleen cell suspension
is prepared using a 200-mesh nylon mesh. Use serum-free culture medium or Hank’s solution
to prepare the obtained spleen cell suspension to 5×106 cells/mL; use 0.5% trypan blue staining
to observe that the number of viable cells shall be above 90%.
8.5 Preparation of agarose
Prepare 1% agarose; mix it with an equal amount of Hank’s solution with 2 times the
concentration; autoclave it at 121°C for 30 min. And distribute it into small test tubes that are
insulated in a water bath of 45°C ~ 50°C; 2 mL per test tube.
8.6 Mixed and plaque-forming cell counts
Add 0.2 mL of 10% SRBC (volume fraction, prepared with SA buffer) and 0.1 mL of spleen
cell suspension (5 × 106 cells/mL) into each small test tube; mix quickly and pour into a 35 mm
diameter plastic plate. Make 3 parallel samples for each animal. After coagulation, place the
plate in a 37°C, 5% CO2 incubator and incubate for 1.5 h. Then add complement (1:8~1:15)
diluted with SA buffer to the surface of the plate; continue to incubate for 1.5 h; and count the
number of hemolytic plaques.
NOTE: If it needs to preserve the results, add 6mL of 0.25% glutaraldehyde prepared with physiological
saline or PBS to the plate for fixation.
9 Calculation of Results
9.1 Express the results as the number of plaque-forming cells per 106 spleen cells.
9.2 At least 3 agar plates shall be prepared for each animal; the mean and standard deviation of
plaque-forming cells of each animal shall be reported; and appropriate statistical methods shall
be selected for comparison between groups.
10 Judgment of Result
When there is a statistically significant difference in the number of plaque-forming cells
between the test group and the negative control group, the test substance can be considered to
have an impact on the plaque-forming cell measurement test. This effect may indicate that the
test substance shall interfere with the body's humoral immunity. If a gradient dilution of the
sample/extract is used for the test, and a dose-effect relationship appears on the number of
plaque-forming cells, it indicates that there may be an impact on the plaque-forming cell assay.
11 Inspection of Reliability
11.1 The inhibitory effect of interfering substances on humoral immunity is the primary
immunotoxicity that needs to be considered. Therefore, the positive control in this test is to
confirm the suitability of the test by using substances that have been shown to have inhibitory
effects on humoral immune function. When it is necessary to confirm that the laboratory has
the ability to conduct this test and can carry out intra-laboratory repeatability and inter-
laboratory reproducibility evaluation, it shall recommend to use a positive control for each test.
11.2 For laboratories that frequently conduct this test (at a frequency of no less than once a
month) and have long-term positive control data to prove their ability to obtain reproducible
and accurate positive results, the positive control test can be performed periodically (with an
interval of ≤ 6 months).
12 Test Report
The test report should contain the following information:
a) Test sample name, specification model and batch number;
b) Test and control sample preparation methods;
c) The strain, age and weight of the test animals;
d) Test conditions and test procedures;
e) Test results;
f) Result evaluation;
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YY/T 1465.3-2016 be delivered?Answer: The full copy PDF of English version of YY/T 1465.3-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YY/T 1465.3-2016_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 1465.3-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY/T 1465.3-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of YY/T 1465.3-2016?A step-by-step guide to download PDF of YY/T 1465.3-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YY/T 1465.3-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|