YY 1271-2016 PDF English
US$135.00 · In stock · Download in 9 secondsYY 1271-2016: Cardiopulmonary bypass systems. Suction catheter for single use Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete YY 1271: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YY 1271-2016 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cardiopulmonary bypass systems. Suction catheter for single use
| Obsolete |
| YY/T 1271-2016 | English | 199 |
Add to Cart
|
3 days
|
Cardiopulmonary bypass systems-Suction catheter for single use
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YY 1271-2016
YY 1271-2016: Cardiopulmonary bypass systems. Suction catheter for single use---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YY1271-2016
YY
PHARMACEUTICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.40
C 45
Cardiopulmonary bypass systems –
Suction catheter for single use
Issued on: MARCH 23, 2016
Implemented on: JANUARY 01, 2018
Issued by. China Food and Drug Administration
Table of Contents
Foreword . 3
1 Scope .. 4
2 Normative references . 4
3 Classification and structure . 5
4 Requirements . 6
5 Test methods .. 8
6 Marking, instruction manual . 11
7 Packaging, transport, storage . 12
Cardiopulmonary bypass systems –
Suction catheter for single use
1 Scope
This standard specifies the classification and structure, requirements, test
methods, markings, labels, instructions for use, packaging, transportation, and
storage of sterile suction catheter for single use (hereinafter referred to as
suction catheter).
This standard applies to suction catheters, for supporting cardiopulmonary
bypass system, suction catheter for cardiovascular ventilation in the left heart,
suction decompression or reduction of left heart load, to attract the intracardiac
blood and other fluids.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 191-2008 Packaging - Pictorial marking for handling of goods
GB/T 9969-2008 General principles for preparation of instructions for use of
industrial products
GB/T 14233.1-2008 Test methods for infusion transfusion injection
equipment for medical use - Part 1. Chemical analysis methods
GB/T 14233.2-2005 Test methods for infusion, transfusion, injection
equipment for medical use - Part 2. Biological test methods
GB/T 16886.1 Biological evaluation of medical devices - Part 1. Evaluation
and testing within a risk management process
GB 18279 Medical devices - Validation and routine control of ethylene oxide
sterilization
4.2.1 Leakage-free
Suction catheter shall be no leakage free.
4.2.2 Connection strength
Suction catheter shall be firmly connected.
4.2.3 Temperature adaptability
The suction catheter shall be free from deformation and rupture in the
temperature range of 0 °C ~ 50 °C.
4.2.4 Negative pressure tolerance
Under room temperature conditions, when a negative pressure of 20 kPa (150
mmHg) is applied for 15 seconds, the suction catheter body shall not be
flattened.
4.3 Biological properties
4.3.1 Biological evaluation
Suction catheters shall be free of biological hazards.
4.3.2 Sterility
The suction catheter shall be sterilized by the sterilization process that has been
confirmed.
4.3.3 Pyrogen-free
The suction catheter shall be pyrogen free.
4.4 Chemical properties
4.4.1 Reducing substances (easily oxides)
The difference between the 20 mL of test solution and the volume of potassium
permanganate solution [c(KMnO4) = 0.002 mol/L] consumed by the same batch
of blank control solution shall not exceed 2.0 mL.
4.4.2 Heavy metals
When measured by atomic absorption spectrophotometry (AAS) or equivalent
method, the total content of bismuth, chromium, copper, lead, and tin in the test
solution shall not exceed 1 μg/mL. The content of cadmium shall not exceed
0.1 μg/mL.
When it is subject to visual observation, the suction catheter shall meet the
requirements of 4.1.
5.2 Physical properties
5.2.1 Leakage-free
CONNECT the suction catheter passage, LEAD in air or nitrogen gas at a
pressure of 50 kPa above atmospheric pressure, PLACE it in water, MAINTAIN
it for 10 min, there shall be free from air bubble escape under careful
observation. It shall comply with the requirements of 4.2.1.
5.2.2 Connection strength
APPLY the axial static tensile force of 15 N at each joint of the suction catheter
for 15 s. It shall be free from separation. It shall comply with the requirements
of 4.2.2.
5.2.3 Temperature adaptability
PLACE the suction catheter in a 0°C environment for 3 minutes, then PLACE it
in a 50°C environment for 3 hours. After removal, RESTORE it to room
temperature for observation, MAKE it subject to the leakage free test of 5.2.1,
it shall comply with the requirements of 4.2.3.
5.2.4 Negative pressure tolerance
CONNECT the suction end of the suction catheter to a vacuum source, BLOCK
the suction hole, APPLY a negative pressure of 20 kPa for 15 seconds at room
temperature. The suction catheter body shall not be flattened, it shall comply
with the provisions of 4.2.4.
5.3 Biological properties
5.3.1 Biological evaluation
The biological properties shall be evaluated in accordance with the provisions
of GB/T 16886.1.
5.3.2 Sterility test
The sterilization process shall be confirmed in accordance with relevant
standards such as GB 18279 or GB 18280.
Sterility test is performed in accordance with the provisions of GB/T 14233.2-
2005, the method should not be used for exit-factory inspection.
5.5 Corrosion resistance
Take out the metal parts, make it subject test in accordance with the sodium
chloride solution test method in YY/T 0149-2006, the results shall comply with
the provisions of 4.5.
5.6 Particle contamination
The test shall be conducted in accordance with the provisions in Appendix A of
GB 19335-2003, it shall comply with the provisions of 4.6.
5.7 Validity period test
Take the products that have expired not exceeding one month (arbitration
method, which is preferred), or perform aging in accordance with the provisions
of YY/T 0681.1-2009, to test the items of 4.2, 4.3.2, 4.3.3, the results shall
comply with the requirements of 4.7.
6 Marking, instruction manual
6.1 Marking
6.1.1 The product packaging shall have the following markings.
a) The name of the manufacturer;
b) The product name, model specifications;
c) The production lot number, validity period;
d) Words or illustrations such as “for single-use”, “sterility”, “do not use if
package broken”, “please read manual before use”, etc.
6.1.2 Product packaging shall have the following markings.
a) Manufacturer's name, address;
b) Product name, model specifications;
c) Implemented standard number;
d) Product registration number;
e) Production license number;
f) Production lot number;
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YY 1271-2016 be delivered?Answer: The full copy PDF of English version of YY 1271-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YY 1271-2016_English with my colleagues?Answer: Yes. The purchased PDF of YY 1271-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY 1271-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YY 1271-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY 1271-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YY 1271-2016?A step-by-step guide to download PDF of YY 1271-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YY 1271-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|