HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

YY 0290.2-2021 PDF English

US$410.00 · In stock · Download in 9 seconds
YY 0290.2-2021: Ophthalmic optics - Intraocular lenses - Part 2: Optical properties and test methods
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

YY 0290.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
YY 0290.2-2021English410 Add to Cart 0-9 seconds. Auto-delivery Ophthalmic optics - Intraocular lenses - Part 2: Optical properties and test methods Valid
YY 0290.2-2009English305 Add to Cart 0-9 seconds. Auto-delivery Ophthalmic implants. Intraocular lenses. Part 2: Optical properties and test methods Obsolete
YY 0290.2-1997English519 Add to Cart 4 days Intraocular lenses. Part 2: Optical properties and their test methods Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: YY 0290.2-2021
      

Similar standards

YY/T 0290.5   YY 0290.8   YY 0290.5   YY/T 0290.4   

YY 0290.2-2021: Ophthalmic optics - Intraocular lenses - Part 2: Optical properties and test methods


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YY0290.2-2021
YY PHARMACEUTICAL INDUSTRY STANDARD ICS 11.040 C 40 Replacing YY 0290.2-2009 Ophthalmic optics - Intraocular lenses - Part 2.Optical properties and test methods (ISO 11979-2.2014, MOD) Issued on. MARCH 09, 2021 Implemented on. APRIL 01, 2023 Issued by. National Medical Products Administration

Table of Contents

Foreword... 3 Introduction... 6 1 Scope... 7 2 Normative references... 7 3 Terms and definitions... 7 4 Requirements... 8 Appendix A (Normative) Measurement of optical power... 14 Appendix B (Normative) Measurement of resolution... 24 Appendix C (Normative) Measurement of MTF... 27 Appendix D (Informative) Precision of optical power measurements... 34 Appendix E (Informative) Precision of image quality measurement... 35 Appendix F (Informative) Verification of ray tracing calculations... 36 References... 37

Foreword

All technical requirements of this standard are mandatory. YY 0290 "Ophthalmic optics - Intraocular lenses" is divided into 9 parts. - Part 1.Terminology; - Part 2.Optical properties and test methods; - Part 3.Mechanical properties and test methods; - Part 4.Labeling and information; - Part 5.Biocompatibility; - Part 6.Shelf-life and transport stability; - Part 8.Fundamental requirement; - Part 9.Multifocal intraocular lenses; - Part 10.Phakic intraocular lenses. This Part is the Part 2 of YY 0290. This part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces YY 0290.2-2009 "Ophthalmic implants - Intraocular lenses - Part 2. Optical properties and test methods". Compared with YY 0290.2-2009, the main technical changes are as follows, except editorial modifications. - MODIFY the description of the scope of application (see Chapter 1; Chapter 1 of the 2009 edition); - MODIFY the normative references (see Chapter 2; Chapter 2 of the 2009 edition); - MODIFY the content of the general provisions, deleting the original two notes (see 4.1; 4.1 of the 2009 edition); - ADD the power tolerance requirements of toric intraocular lens, multifocal intraocular lens, accommodating intraocular lens (see 4.2.2, 4.2.3, 4.2.4); - ADD the image quality overview, MTF measurement using model eye 2, toric intraocular lens, multifocal intraocular lens, accommodating intraocular lens, image quality requirements for combination of optical principles (see 4.3.1, 4.3.2.4, 4.3.3, 4.3.4, 4.3.5, 4.3.6); - MODIFY the spectral transmittance requirements, making adjustment of the structure, which is described in clauses (see 4.4; 4.4 of the 2009 edition); - DELETE the color vision impact analysis and the reduction degree of blue light radiation hazards (see 4.4; 4.4 of the 2009 edition); - DELETE the Appendix G and Appendix H (Appendix G and Appendix H of the 2009 edition); - ADD the determination of power and axial error of toric intraocular lens, determination of power of multifocal intraocular lens, determination of power of accommodating intraocular lens (see A.5, A.6, A.7); - ADD the resolution measurement of toric intraocular lens, resolution measurement of multifocal intraocular lens, optical resolution measurement of accommodating intraocular lens (see B.7, B.8, B.9); - ADD the model eye 2, MTF measurement of toric intraocular lens, MTF measurement of multifocal intraocular lens, MTF measurement of accommodating intraocular lens (see C.3.2, C.6, C.7, C.8). This Part uses the redrafting method, to revise and adopt ISO 11979-2.2014 "Ophthalmic implants - Intraocular lenses - Part 2.Optical properties and test methods" (English version). There are technical differences between this Part and ISO 11979- 2.2014.The clauses, which are involved in these differences, have been marked by a vertical single line (|), in the outer margin position. The technical differences, between this Part and ISO 11979-2.2014, as well as the reasons are as follows. - Regarding the normative references, this standard has made adjustments with technical differences, to adapt to the technical conditions of China. The adjustments are specifically reflected in "2 Normative references". The specific adjustments are as follows. ● USE GB/T 4315.1, which modifies and adopts the international standard, to replace ISO 9334; ● USE GB/T 4315.2, which modifies and adopts the international standard, to replace ISO 9335; ● USE GB/T 9045-2006, which identically adopts the international standard, to replace ISO 6328.2000; ● USE YY 0290.1, which modifies and adopts international standard, to replace ISO 11979.1; ● USE YY 0290.3, which modifies and adopts the international standard, to replace ISO 11979.3; ● USE YY 0290.4, which identically adopts the international standard, to replace ISO 11979.4; - For the spectral transmittance in 4.4, ADD the relevant requirements for the UV limit value, to enhance the enforceability of the standard; - MAKE supplement to the test method requirements of spectral transmittance in 4.4, which is convenient for users to refer to; - DELETE the 4.3.7 Exception clause; the content of the clause is added to 4.3.1 Overview. This Part makes the following editorial changes. - ADD the Appendix D, Appendix E, Appendix F as informative appendixes, which are convenient for users to understand and refer to. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying these patents. This Part was proposed by the State Drug Administration. This Part shall be under the jurisdiction of the National Medical Optics and Instruments Standardization Sub-Technical Committee (SAC/TC 103/SC 1). Drafting organization of this Part. Zhejiang Medical Device Inspection and Research Institute. The main drafters of this Part. Jia Xiaohang, Feng Qin, Luo Yongjie, Song Ting, Chen Qionghui. The previous releases of YY 0290.2-2021 are as follows. - YY 0290.2-1997; - YY 0290.2-2009.

1 Scope

This Part specifies the main optical performance requirements and test methods of intraocular lenses (IOLs).

2 Normative references

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 4315.1 Optical transfer function - Part 1.Terminology and symbol (GB/T 4315.1-2009, ISO 9334.2007, MOD)

3 Terms and definitions

The terms and definitions, which are defined in YY 0290.1 and GB/T 4315.1, apply to this document.

4 Requirements

Any method in Appendix A can be used to determine the focal power of the highest power meridian, the lowest power meridian, the equivalent spherical power of the toric intraocular lens.

Appendix A

(Normative) Measurement of optical power This Appendix gives a variety of methods for the determination of optical power. These methods are applicable to spherical and aspheric monofocal, toric or multifocal IOLs. The power values of all intraocular lenses are defined in the intraocular state (refer to YY 0290.1).

Appendix B

(Normative) Measurement of resolution This Appendix presents principles, devices, and methods applicable to the measurement of intraocular lens resolution.

Appendix C

(Normative) Measurement of MTF This Appendix presents the principles, equipment, methods, which are applicable to the measurement of the modulation transfer function of rotationally symmetric monofocal intraocular lenses. For other types of IOLs, the required modifications are given at the end of this Appendix. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of YY 0290.2-2021 be delivered?

Answer: The full copy PDF of English version of YY 0290.2-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YY 0290.2-2021_English with my colleagues?

Answer: Yes. The purchased PDF of YY 0290.2-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- YY 0290.2-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version YY 0290.2-2021?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY 0290.2-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of YY 0290.2-2021?

A step-by-step guide to download PDF of YY 0290.2-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YY 0290.2-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9