YS/T 649-2007 (YS/T649-2007, YST 649-2007, YST649-2007)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 649-2007 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Extruded rod and bar of copper and copper alloys
| Obsolete |
YS/T 649-2007
|
| YS/T 649-2018 | English | 195 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Extruded rod and bar of copper and copper alloys
| Valid |
YS/T 649-2018
|
Newer version: YS/T 649-2018 Standards related to: YS/T 649-2018
| Standard ID | YS/T 649-2007 (YS/T649-2007) | | Description (Translated English) | Extruded rod and bar of copper and copper alloys | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H62 | | Classification of International Standard | 77.150.30 | | Word Count Estimation | 9,951 | | Date of Issue | 2007-11-14 | | Date of Implementation | 2008-05-01 | | Older Standard (superseded by this standard) | GB/T 13808-1992 | | Quoted Standard | GB/T 228; GB/T 231.1; GB/T 2828.1; GB/T 3310; GB/T 5121.1; GB/T 5231; GB/T 8888; GB/T 11086; YS/T 336; YS/T 448; GB/T 5121.2; GB/T 5121.3; GB/T 5121.4; GB/T 5121.5; GB/T 5121.6; GB/T 5121.7; GB/T 5121.8; GB/T 5121.9; GB/T 5121.10; GB/T 5121.11; GB/T 5121.12; GB/T 5121.13; GB/T 5121.14; GB/T 5121.15; GB/T 5121.16; GB/T 5121.17; GB/T 5121.18; GB/T 5121.19; GB/T 5121.20; GB/T 5121.21; GB/T 5121.22; GB/T 5121.23; GB/T 5121.24; GB/T 5121.25; GB/T 5121.26; GB/T 5121.27; GB/T 5121.28 | | Adopted Standard | JIS H3250-1992, NEQ | | Drafting Organization | Chinalco Luoyang Copper Co., Ltd. | | Administrative Organization | National Standardization Technical Committee of non-ferrous metals | | Regulation (derived from) | NDRC Notice No. 77 of 2007 | | Proposing organization | National Nonferrous Metals Standardization Technical Committee | | Issuing agency(ies) | National Development and Reform Commission | | Summary | This standard specifies the copper and copper alloy extruded rods requirements, test methods, test rules and signs, packaging, transportation, storage and contract content. This standard applies to general-purpose round, square (rectangular) shaped and hexagonal copper and copper alloy extruded rods. | YS/T 649-2007
Extruded rod and bar of copper and copper alloys
ICS 77.150.30
H62
People's Republic of China Nonferrous Metals Industry Standard
Copper and copper alloy extruded rod
Posted 2007-11-14
2008-05-01 implementation
National Development and Reform Commission issued
Foreword
This standard is GB/T 13808-1992 "copper and copper alloy extruded rod" for the industry to adjust the revised standard and GB/T 13809-
1992 "Copper and copper alloy rectangular stick" extruded rod portion included in the standard. Revision, with reference to the Japanese Industrial Standard JISH3250.1992
"Copper and copper alloy rods."
This standard and GB/and GB/T 13809-1992, compared T 13808-1992 main changes are as follows.
--- Increased QA110-5-5, BFe10-1-1, QSn4-0.3 four grades;
--- Adjust some of the product specifications. relaxed class copper and HSn62-1, HMn58-2, HFe59-1-1, H62, HPb59-1,
QAl9-2, QAl9-4, QAl10-3-1.5, QAl10-4-4, QSn4-3, QSn7-0.2, QSn6.5-0.1, QSn6.5-0.4 round
The upper limit for the diameter of the rod; T2, T3 square, hexagonal rod diameter lower limit for the "30mm" adjusted "20mm"; increase
The QAl9-2 grades square, hexagonal rods SPECIFICATIONS.
--- Rod diameter to allow deviation margins expressed as a percentage;
--- Roundness tolerances equivalent diameter of the rod, to the margins of tolerance;
--- Added "end cut allow no more than 3mm cut slope" requirement;
--- Diameter of not more than 120mm rod straightness were tightened, and the shaped rod straightness were prescribed;
--- The "When selecting the hardness test, tensile test results for reference only" to "When selecting the hardness test, tensile test is not";
--- Tensile test specimens long deleted provisions;
--- Increased TU1, TU2, TP2, H59, H80, QSi3.5-3-1.5, QCr0.5 grade mechanical performance requirements;
--- H96 Elongation rate of "33%" to "35%;
--- Increased diameter (on the margin) is not greater than QAl9-2 grades Brinell hardness of 45mm;
--- The grades QAl10-5-5 QAl10-4-4 and performance requirements into one file, while the Brinell hardness from "170 to 240"
Changed to "170 to 260";
--- Remove the "rod diameter of less than 16mm can not Brinell hardness test" requirement;
--- Remove the oxygen free copper predetermined Metallographic detection.
This standard by the National Standardization Technical Committee of non-ferrous metals and centralized.
The standard by Chinalco Luoyang Copper Co., Ltd. is responsible for drafting.
The main drafters of this standard. Menghui Juan, steady Guo Hui, Zhu Yingli, Yang Lijuan Campus of Li Bingtao.
This standard by the National Standardization Technical Committee is responsible for interpretation of non-ferrous metals.
This standard replaces the standards previously issued as follows.
--- YS/T 455-1971, YS/T 456-1971, YS/T 457-1971, YS/T 458-1971, YS/T 553-1971,
YS/T 721-1971, YS/T 722-1970, YS/T 790-1971
--- GB/T 4423 ~ 4426-1984, GB/T 4429 ~ 4433-1984
--- GB/T 13808-1992
Copper and copper alloy extruded rod
1 Scope
This standard specifies the copper and copper alloy extruded rod requirements, test methods, inspection rules and signs, packaging, transportation, storage and the contract
Tolerance and so on.
This standard applies to general purpose of circular, rectangular (square) shape and hexagonal copper and copper alloy extruded rods.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 228 metal materials at room temperature tensile test method
GB/T 231.1 Brinell hardness test - Part 1. Test methods
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 3310 copper alloy rods ultrasonic flaw detection method
GB/T 5121 (all parts) of copper and copper alloys -
GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product
GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation and storage
GB/T 11086 Copper and copper alloys - Terms
YS/T 336 copper, nickel and alloy pipe and bar fracture test method
YS/T 448 copper and copper alloy casting and machining products macroscopic inspection method
3 Requirements
3.1 Categories
3.1.1 grade, status, specifications
Product grades, status, size should be in accordance with Table 1.
3.1.2 tag example
Products marked by order of the product name, grade, status, specifications and standards of numbered steps. Tag example as follows.
Example 1.
T2 with manufacturing, R state, high-precision, a diameter of 40mm, a length of 2000mm length of round bars marked.
Round bar T2R high 40 × 2000 YS/T 649-2007
Example 2.
Manufactured with H62, R state, the general level, the long side of 50mm, the short side of 20mm, a length of 3000mm length of the rectangular bar marked.
Rectangular bar H62R 50 × 20 × 3000 YS/T 649-2007
Example 3.
With HSn62-1 manufacturing, R state, the general level, the long side of 30mm, a length of 3000mm square bar marked.
Square bar HSn62-1R 30 × 3000 YS/T 649-2007
Example 4.
With HPb59-1 manufacturing, R state, high-precision, on the margins of 30mm, a length of 3000mm length of the rectangular rod hexagonal rods labeled as follows.
Hexagonal rod HPb59-1R high 30 × 3000 YS/T 649-2007
...
|