HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

YS/T 254.1-2011 PDF English

US$130.00 · In stock · Download in 9 seconds
YS/T 254.1-2011: Methods for chemical analysis of beryllium concentrate and beryl. Part 1: Determination of beryllium oxide content. Phosphate gravimetry
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

YS/T 254.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
YS/T 254.1-2011English130 Add to Cart 0-9 seconds. Auto-delivery Methods for chemical analysis of beryllium concentrate and beryl. Part 1: Determination of beryllium oxide content. Phosphate gravimetry Valid
YS/T 254.1-1994English199 Add to Cart 2 days Methods for chemical analysis of beryllium concentrates-beryl The phosphate gravimetric method for the determination of beryllium oxide content Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: YS/T 254.1-2011
      

Similar standards

GB/T 27682   GB/T 17413.1   YS/T 254.8   

YS/T 254.1-2011: Methods for chemical analysis of beryllium concentrate and beryl. Part 1: Determination of beryllium oxide content. Phosphate gravimetry


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST254.1-2011
YS NONFERROUS METAL INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 73.060 D 43 Replacing YS/T 254.1-1994 Methods for chemical analysis of beryllium concentrate and beryl - Part 1: Determination of beryllium oxide content - Phosphate gravimetry ISSUED ON: DECEMBER 20, 2011 IMPLEMENTED ON: JULY 01, 2012 Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Method summary ... 5 3 Reagents ... 5 4 Specimen ... 6 5 Analysis steps ... 6 6 Calculation and presentation of analysis results ... 7 7 Precision ... 8 8 Quality assurance and control ... 9 Methods for chemical analysis of beryllium concentrate and beryl - Part 1: Determination of beryllium oxide content - Phosphate gravimetry

1 Scope

This Part of YS/T 254 specifies the method for determining the content of beryllium oxide in beryllium concentrate and beryl. This Part is applicable to the determination of beryllium oxide in beryllium concentrate and beryl. The determination range is 6.00%~14.00%.

2 Method summary

The test material is melted with potassium hydrofluoride. Beryllium is converted into beryllium fluoride salt. After sulfuric acid fumes and melts, it is converted into beryllium sulfate. Leach with water. Acidify with hydrochloric acid. Use hydrogen peroxide and disodium ethylenediaminetetraacetate to complex impurity elements. In the presence of ammonium acetate, diammonium hydrogen phosphate is used to precipitate beryllium twice at a pH value of 5.2~5.8. The precipitate is burned into beryllium pyrophosphate at 1000°C. Weigh to constant.

3 Reagents

3.1 Potassium hydrofluoride. 3.2 Sulfuric acid (ρ1.84 g/mL). 3.3 Hydrochloric acid (ρ1.19 g/mL). 3.4 Hydrogen peroxide (ρ1.10 g/mL). 3.5 Ammonia (ρ0.90 g/mL). 3.6 Hydrochloric acid solution (1+3). 3.7 Ammonia (1+1). 3.8 Diammonium hydrogen phosphate solution (132.5 g/L): Weigh 132.5 g of diammonium hydrogen phosphate. Dissolve in 500 mL of water. Filter. Transfer to a 5.3.3 Move the platinum dish into a 700°C high temperature furnace. Melt it until it becomes transparent. Take out. Cool down. 5.3.4 Wipe the outer wall of the platinum dish. Dip the melt into a 400 mL beaker with hot water. Add 5 mL of hydrochloric acid (3.3). Heat and boil to make the solution clear. 5.3.5 Add 3 mL of hydrogen peroxide (3.4), 10 mL of disodium ethylenediaminetetraacetate solution (3.9), and 8 mL of diammonium hydrogen phosphate solution (3.8) into the beaker. Neutralize with ammonia water (3.5) until obvious precipitation appears. Slowly add 20 mL of ammonium acetate solution (3.10) while stirring. Heat and boil for 2 min ~ 3 min. 5.3.6 Place the beaker in a boiling water bath to keep it warm. Convert the precipitate into crystalline precipitate. Cool down. Leave for more than 4 h. 5.3.7 Filter with slow quantitative filter paper. Wash the beaker and sediment 4~5 times with hot ammonium nitrate solution (3.11). 5.3.8 Use 20 mL of hot hydrochloric acid solution (3.6) to dissolve the precipitate from the funnel into the original beaker. Wash the filter paper several times with hot water. Dilute the solution with water to a volume of approximately 100 mL. 5.3.9 Add 1 mL of hydrogen peroxide (3.4), 5 mL of disodium ethylenediaminetetraacetate solution (3.9), and 4 mL of diammonium hydrogen phosphate solution (3.8) into the beaker. Neutralize with ammonia water (3.5) until obvious precipitation appears. Slowly add 20 mL of ammonium acetate solution (3.10) while stirring. Heat and boil for 2 min ~ 3 min. 5.3.10 Place the beaker in a boiling water bath to keep it warm. Convert the precipitate into crystalline precipitate. Cool down. Leave for more than 4 h. 5.3.11 Filter with slow quantitative filter paper. Wipe the beaker clean with half a piece of filter paper. Wash with hot ammonium nitrate solution (3.11) until there is no chloride ion [check with silver nitrate (3.12)]. 5.3.12 Place the precipitate together with the filter paper in a constant weight crucible (porcelain or corundum). Carefully dry and ashes. Place it in a high temperature furnace of 1000℃ and burn it for 2 h. Take out. Cool slightly. Place in a desiccator to cool to room temperature. Weigh. Then put the crucible into a high temperature furnace of 1000℃. Burn it for 1 h. take out. Cool slightly and then place in a desiccator to cool to room temperature. Weigh to constant.

6 Calculation and presentation of analysis results

The content of beryllium oxide is calculated as the mass fraction of beryllium oxide wBeO. Values are expressed in %. Calculate according to formula (1): ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of YS/T 254.1-2011 be delivered?

Answer: The full copy PDF of English version of YS/T 254.1-2011 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YS/T 254.1-2011_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 254.1-2011_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- YS/T 254.1-2011 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version YS/T 254.1-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 254.1-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of YS/T 254.1-2011?

A step-by-step guide to download PDF of YS/T 254.1-2011_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YS/T 254.1-2011".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9