YS/T 1065.4-2015 (YST1065.4-2015)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
YS/T 1065.4-2015	English	159	Add to Cart	3 days [Need to translate]	Methods for physical performance determination of zeolite. Part 4: Determination of　non-ionic liquid-carrying capacity	YS/T 1065.4-2015		YS/T 1065.4-2015

YS/T 1065.4-2015
(Zeolite determination of physical performance - Part 4. Non-ionic liquid carrying capacity (LCC) Determination)
ICS 77.120.10
H21
People's Republic of China Nonferrous Metals Industry Standard
Zeolite determination of physical performance
Part 4. Non-ionic liquid carrying capacity
(LCC) Determination
Part 4. Determinationofnon-ionicliquid-carryingcapacity
Issued on. 2015-04-30
2015-10-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
YS/T 1065-2015 "zeolite determination of physical performance" is divided into the following four parts.
--- Part 1. Determination of EDTA calcium exchange capacity of titration;
--- Part 2. Determination of particle size centrifugal sedimentation method;
--- Part 3. loss on ignition - Gravimetric method;
--- Part 4. Non-ionic liquid carrying capacity (LCC) measurement.
This is Part 4.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) and focal points.
Drafting this Part. Aluminum Corporation of China Shandong Branch, Zibo City, Shandong Province Product Quality Supervision, Inspection, Shandong Li
Wave daily chemical Co., Ltd., Kunming Metallurgy Research Institute.
The main drafters of this section. Han Gang, Xu Hao-wen, Chen Lijun, An Kun, Wei Hong, Zhang Ping, Luo Shun.
Zeolite determination of physical performance
Part 4. Non-ionic liquid carrying capacity
(LCC) Determination
1 Scope
YS/T 1065 provisions of this part of the determination of non-ionic liquid zeolite carrying capacity.
This section applies to the determination of the ability of non-ionic liquid zeolite to carry. Measurement range of 40g ~ 70g.
2 principle of the method
Zeolite having ability to adsorb non-ionic, non-ionic liquid used in this part of the way to saturation adsorbed mass per 100g of zeolite adsorption
To determine the carrying capacity of the zeolite nonionic.
3 Instrument
3.1 Balance. a sense of the amount of 0.1g.
3.2 Mixer.
4 Reagents
4.1 Non-ionic surfactants. fatty alcohol ethoxylates (AEO-10).
4.2 orange dye. Commercially available.
5 measuring step
5.1 Weigh 1.0g orange dye (4.2) was dissolved in 1000mL fatty alcohol ethoxylates (4.1), the backup.
5.2 said zeolite samples taken 50.0g after drying, mixing into a blender, and uniform distribution of the zeolite samples.
5.3 with a dropper trickle a little formulated reagent (5.1), open the mixer, and uniformly stirred.
5.4 observe whether a color change of the sample reagent (5.1) the same, whether the sample was wet and sticky like particles. If no, repeat 5.3.
5.5 When a sample of zeolite-like particles were clammy, stop reagent was added, then the zeolite sample color reagent (5.1) of the same color.
5.6 weighed sample of zeolite adsorption saturation after the mass m.
6 calculated results
According to formula (1) sample of zeolite calculated nonionic liquid carrying capacity (LCC).
LCC = (m-m1) × 2 (1)
Where.
--- The LCC nonionic liquid carrying capacity of the zeolite sample in grams per 100 grams (g/100g);