YS/T 1050.3-2015 (YST1050.3-2015)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
YS/T 1050.3-2015	English	139	Add to Cart	3 days [Need to translate]	Methods for chemical analysis of lead antimony concentrates. Part 3: Determination of arsenic content. The potassium bromate titration method	YS/T 1050.3-2015	Valid	YS/T 1050.3-2015

YS/T 1050.3-2015
(Lead-antimony concentrates - Part 3. Determination of arsenic content of potassium bromate titration)
ICS 73.060
D42
People's Republic of China Nonferrous Metals Industry Standard
Methods for chemical analysis of lead-antimony concentrate
Part 3. Determination of arsenic content
Potassium bromate titration
Part 3. Determinationofarseniccontent-
Issued on. 2015-04-30
2015-10-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
YS/T 1050-2015 "Methods for chemical analysis of lead-antimony concentrate" is divided into the following nine sections.
--- Part 1. Determination of lead content Na2EDTA titration;
--- Part 2. Determination of antimony content cerium sulfate titration;
--- Part 3. Determination of arsenic content potassium bromate titration;
--- Part 4. Determination of zinc contents Na2EDTA titration;
--- Part 5. Determination of sulfur content - Gravimetric method;
--- Part 6. Determination of iron content cerium sulfate titration;
--- Part 7. Determination of the amount of bismuth and copper - Flame atomic absorption spectrometry amount;
--- Part 8. gold and silver content determination fire assay;
--- Part 9. Determination of the amount of silver by flame atomic absorption spectrometry.
This is Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized.
This section is responsible for drafting unit. Guangxi Metallurgical Product Quality Supervision and Inspection Station.
Drafting this Part. Analysis and Testing Research Center of Guangxi Zhuang Autonomous Region.
Participated in the drafting of this section. Guangxi China Tin Group Co., Ltd., Guilin University of Technology, Hunan Anhua Zhazixi Mining Limited.
The main drafters of this section. Ye Kaifu, Wei Meng, Huangzhao Min, Huang Xusheng, Yang Qiuling, He Xiaohu, Zhousu Lian, Wu Shaobo, Huang Hong Liu,
Zhang Hongyun, Zhang Min, Lvmin Li.
Methods for chemical analysis of lead-antimony concentrate
Part 3. Determination of arsenic content
Potassium bromate titration
1 Scope
This section YS/T 1050 specifies the method for determination of lead-antimony concentrate arsenic content.
This section applies to the determination of lead in antimony concentrate arsenic content measurement range (mass fraction) 0.30% - 4.50%.
2 Method summary
Sample with nitric acid, potassium chlorate and sulfuric acid decomposition in 6mol/L hydrochloric acid medium with potassium bromide as the catalyst for the reduction Hydrazine sulfate
Agents, micro-boiling distillation, condensate in sulfuric acid medium, methyl orange - methylene blue as indicator, titration with cerium sulfate solution in a small amount of distillate
Trivalent antimony, supplemented with methyl orange indicator, and then potassium bromate standard solution titration to the disappearance of the red end.
3 Reagents
Unless otherwise indicated, this part of the reagents were analytical reagent, the water for the two water.
3.1 potassium chlorate.
3.2 potassium bromide.
Hydrazine sulfate 3.3.
3.4 hydrochloric acid (ρ = 1.19g/mL).
3.5 nitric acid (ρ = 1.42g/mL).
3.6 sulfate (ρ = 1.84g/mL).
3.7 hydrochloride (11).
3.8 sulfate (11).
3.9 Sodium hydroxide solution (20g/L).
3.10 Arsenic standard solution. Accurately weigh 1.3205g sulfuric acid was dried in a dryer trioxide (mass fraction ≥99.99%) set
In 200mL beaker, sodium hydroxide solution was added 20mL (3.9), covered with a watch glass, low heat until dissolved completely, was added 20mL of water,
2 drops of phenolphthalein indicator (3.13), with hydrochloric acid (3.7) and to the red disappear and excess 2 drops cooled and transferred to 1000mL volumetric flask with water
Dilute to volume, and mix. Arsenic per milliliter of solution 1mg.
3.11 cerium sulfate solution (10g/L). Weigh 12.17g cerium sulfate [Ce (SO4) 2 · 4H2O], placed in 1000mL beaker, add 30mL
Sulfuric acid (3.6), stir, gradually warming on a hot plate heated solvent into a paste, and take the white smoke of