YS/T 1047.7-2015 (YS/T1047.7-2015, YST 1047.7-2015, YST1047.7-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 1047.7-2015 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Methods for chemical analysis of copper magnetite - Part 7: Determination of copper, manganese, aluminium, calcium, magnestium, titanium and phosphorus contents - Inductively coupled plasma atomic emission spectrometric method
| Valid |
YS/T 1047.7-2015
|
Standards related to: YS/T 1047.7-2015
| Standard ID | YS/T 1047.7-2015 (YS/T1047.7-2015) | | Description (Translated English) | Methods for chemical analysis of copper magnetite. Part 7: Determination of copper, manganese, aluminium, calcium, magnestium, titanium and phosphorus contents. Inductively coupled plasma atomic emission spectrometric method | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | D31 | | Classification of International Standard | 73.060.10 | | Word Count Estimation | 9,957 | | Date of Issue | 2015-04-30 | | Date of Implementation | 2015-10-01 | | Quoted Standard | GB/T 602; GB/T 6379.2; GB/T 6682; GB/T 10322.1; GB/T 23942 | | Drafting Organization | People's Republic of China Bayuquan Exit Inspection and Quarantine; Beijing Mining Research Institute; Tianjin, People's Republic of China Exit Inspection and Quarantine; Beijing Nonferrous Metal Research Institute; Baiyin Nonferrous Metals Group Co., Ltd; Dongying Fangyuan Nonferrous Metals Corporation; Zhongtiao Shan nonferrous Metals Group Co., Ltd.; Chinalco Luoyang Copper Co., Ltd.; Yanggu Yoshimitsu Copper Co., Ltd. | | Administrative Organization | National Non-Ferrous Metals Standardization Technical Committee (SAC/TC 243) | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement (2015 No. 28) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This Standard specifies the copper magnetite copper, manganese, aluminum, calcium, magnesium, titanium, and determination of phosphorus content. This Standard applies to the copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus measured amounts of copper magnetite. Measurement range (mass fraction) in Table 1. | YS/T 1047.7-2015
(Copper magnetite chemical analysis - Part 7. Inductively coupled plasma atomic copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus emission spectrometry)
ICS 73.060.10
D31
People's Republic of China Nonferrous Metals Industry Standard
Methods for chemical analysis of copper magnetite
Part 7. copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus contents -
Inductively coupled plasma atomic emission spectrometry
Part 7. Determinationofcopper, manganese, aluminium, calcium,
magnestium, titaniumandphosphoruscontents-
Issued on. 2015-04-30
2015-10-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
YS/T 1047.6-2015 "chemical analysis of copper magnetite" is divided into 11 sections.
--- Part 1. Determination of copper content of 2,2'-quinoline spectrophotometry and flame atomic absorption spectrometry;
--- Part 2. Determination of total iron content of dichromate method;
--- Part 3. Copper and iron - Determination of the amount of sodium thiosulfate titration;
--- Part 4. Determination of the amount of sulfur by high frequency combustion infrared absorption spectroscopy;
--- Part 5. Determination of phosphorus content titration;
--- Part 6. copper, total iron, silica, alumina, calcium oxide, magnesium oxide, titanium oxide, manganese and phosphorus contents - wave
Long-dispersive X-ray fluorescence spectrometry;
--- Part 7. copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus content - Inductively coupled plasma atomic emission spectrometry.
--- Part 8. silicon dioxide content - Gravimetric method;
--- Part 9. Determination of metallic iron content of sulfonic acid spectrophotometry;
--- Part 10. Determination of the amount of ferrous oxide dichromate method;
--- Part 11. Determination of the amount of magnetic iron dichromate method.
This is Part 7.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized.
This section is responsible for drafting unit. People's Republic of China Bayuquan Exit Inspection and Quarantine.
This section was drafted by. People's Republic of China Bayuquan Exit Inspection and Quarantine, Beijing General Research Institute of Mining and Metallurgy.
Participated in the drafting of this section. Tianjin People's Republic of China Exit Inspection and Quarantine, Beijing Nonferrous Metal Research Institute, silver colored
Group Co., Ltd., Dongying Fangyuan Nonferrous Metals Corporation, Zhongtiaoshan Nonferrous Metals Group Co., Ltd., Chinalco Luoyang Copper Co.
Division, Yanggu Yoshimitsu Copper Limited.
Drafters of this section. Plasture Jiang Xiaoguang, Su spring, Wang Haoyun, Zhangdian Kai Ma-li, Wu silent spring, Zhang Guanghua, good Feng Yue, LI Xian and,
Million pairs, Qin Yuying, Linyou Bin, Chen Jinxia, Tong Jian, Liu Min, Chu Ning.
Methods for chemical analysis of copper magnetite
Part 7. copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus contents -
Inductively coupled plasma atomic emission spectrometry
1 Scope
YS/T 1047 This section provides the copper magnetite copper, manganese, aluminum, calcium, magnesium, titanium, and determination of phosphorus content.
This section applies to the copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus measured amounts of copper magnetite. Measurement range (mass fraction) are shown in Table 1.
Table 1 Scope Method
Element measurement range (mass fraction) /%
Cu 0.10 ~ 2.50
Mn 0.050 ~ 0.50
Al 0.10 ~ 2.50
Ca 0.10 ~ 5.00
Mg 0.10 ~ 2.50
Ti 0.010 ~ 0.50
P 0.050 ~ 5.50
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents
GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat
Of the basic methods of reproduction
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 10322.1 iron ore sampling and sample preparation methods
GB/T 23942 Chemicals inductively coupled plasma atomic emission spectrometry General
3 Method summary
Samples with hydrochloric acid, nitric acid, hydrofluoric acid, perchloric acid decomposition, and hydrochloric acid soluble salts. Inductively coupled plasma atomic emission spectrometry
Determination of spectral intensity of each element in the test solution, and calculate the content by the standard curve method.
4 Reagents and materials
Unless otherwise stated, use only in the analysis confirmed analytically pure reagents and in line with two water GB/T 6682 regulations.
...
|