YB/T 4089-2015 (YB/T4089-2015, YBT 4089-2015, YBT4089-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YB/T 4089-2015 | English | 125 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
High power graphite electrode
| Valid |
YB/T 4089-2015
|
Standards related to: YB/T 4089-2015
| Standard ID | YB/T 4089-2015 (YB/T4089-2015) | | Description (Translated English) | High power graphite electrode | | Sector / Industry | Ferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | Q51 | | Classification of International Standard | 29.05 | | Word Count Estimation | 8,892 | | Date of Issue | 2015-07-14 | | Date of Implementation | 2016-01-01 | | Older Standard (superseded by this standard) | YB/T 4089-2000 | | Quoted Standard | GB/T 1427; GB/T 1429; GB/T 3074.1; GB/T 3074.2; GB/T 3074.4; GB/T 8170; GB/T 8719; GB/T 24525; GB/T 24528 | | Drafting Organization | Jilin Carbon Co., Ltd | | Administrative Organization | National Steel Standardization Technical Committee | | Regulation (derived from) | PRC MIIT Announcement (2015 No.49) | | Summary | This Standard specifies the shape of high-power graphite electrodes, the size and tolerance, technical requirements, test methods, inspection rules, packaging, labeling, storage, transport and quality certificates. This Standard applies to calcined coke and coal tar as the main raw material, molding, baking, impregnation, graphitization and machining made, powered furnace as the conductive material of high-power graphite electrodes. | YB/T 4089-2015
YB
FERROUS METALLURGY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 29.050
Q 51
Replacing YB/T 4089-2000
High power graphite electrode
ISSUED ON. JULY 14, 2015
IMPLEMENTED ON. JANUARY 01, 2016
Issued by. Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Shape, size and tolerance ... 5
4 Technical requirements ... 8
5 Test methods ... 9
6 Inspection rules ... 9
7 Packaging, marking, storage, transport and quality certificates ... 9
Appendix A (Informative) Current load of high power graphite electrode ... 11
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces YB/T 4089-2000 “High power graphite electrode”. As
compared with YB/T 4089-2000, the main technical content changes of this
standard are as follows.
- REVISE the normative references;
- ADD the specifications and length grades;
- MODIFY the dimensions and tolerances;
- MODIFY the supply requirements;
- MODIFY the electrode connection requirements;
- MODIFY the physical and chemical indicators;
- MODIFY the surface quality;
- MODIFY the inspection rules;
- MODIFY the current load of the high-power graphite electrode.
This standard was proposed by the China Iron and Steel Association.
This standard shall be under the jurisdiction of the National Steel
Standardization Technical Committee (SAC/TC 183).
Drafting organizations of this standard. Jilin Carbon Co., Ltd., Shanxi Fuyuan
New Energy Co., Ltd., Shijiazhuang South China Carbon Plant, China Pingmei
Shenma Group Kaifeng Carbon Co., Ltd., Metallurgical Industry Information
Standards Institute.
The main drafters of this standard. Jia Wentao, Zhu Haizhe, Yao Luguang,
Liang Jiqiang, Ren Ruiyun, Zheng Jianhua, Liu Yunping, Lu Haitao, Zheng
Jingxu, Zhang Jinying, Sun Wei.
This standard replaces the standard previously issued as follows.
- YB/T 4089-1992, YB/T 4089-2000.
High power graphite electrode
1 Scope
This standard specifies the shape, dimensions and tolerances, technical
requirements, test methods, inspection rules, packaging, marking, storage,
transportation and quality certificates of high-power graphite electrodes.
This standard is applicable to high power graphite electrodes made of calcined
coke and coal tar pitch as main raw materials, formed by molding, burning,
impregnation, graphitization and mechanical processing, and used as the
conductive materials for electric furnace.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 1427 Sampling method for carbon material
GB/T 1429 Carbon materials - Determination of the ash content
GB/T 3074.1 Method for the determination of the flexure strength of graphite
electrodes
GB/T 3074.2 Method for the determination of the elastic modulus of graphite
electrodes
GB/T 3074.4 Method for the determination of the coefficient of thermal
expansion of graphite electrodes
GB/T 8170 Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 8719 General rule for packing, marking, storage, transport and quality
certificates of carbonaceous material and products
GB/T 24525 Carbon material resistivity determination method
GB/T 24528 Carbon materials - Determination method of the bulk density
5 Test methods
5.1 The resistivity is measured in accordance with GB/T 24525.
5.1.1 After the electrode is processed, it is measured on site one by one.
5.1.2 The joint is graphitized and measured at the site.
5.2 The determination of the rupture strength is carried out in accordance with
the provisions of GB/T 3074.
5.3 The modulus of elasticity is determined in accordance with the provisions
of GB/T 3074.
5.4 The determination of volume density is carried out in accordance with the
provisions of GB/T 24528.
5.5 The thermal expansion factor is determined in accordance with the
provisions of GB/T 3074.
5.6 Determination of ash content is carried out in accordance with the provisions
of GB/T 1429.
5.7 The end surface clearance at the electrode joint is measured using a feeler
gauge.
6 Inspection rules
6.1 The quality inspection of the electrode shall be carried out by the supplier's
quality supervision and inspection department; the buyer may make
acceptance in accordance with the provisions of this standard.
6.2 Sampling method shall be carried out in accordance with GB/T 1427.
6.3 Batch of thermal expansion coefficient (CTE) and quantity to be sampled
per batch.
6.3.1 Electrodes and joints of the same type and specifications shall be
measured at least once a month.
6.3.2 Not less than 2 samples are determined every time.
6.4 The numerical rounding off is carried out in accordance with the provisions
of GB/T 8170.
7 Packaging, marking, storage, transport and quality
...
|